StarTech.com

KVM-switch med 4 portar med dubbel VGA - USB 2.0

Kontrollera fyra USB-utrustade datorer med dubbel VGA med en konsol med två skärmar och audiouppsättning

Produkt ID: SV431DVGAU2A

  • Maximal produktivitet med dubbla skärmar och åtkomst till flera datorer
  • Problemfri användning med växling via genvägskommandon och knapp
  • Dela dina USB-tillägg med inbyggd USB-hubb med 2 portar
Visa mer
  • Stöder upplösningar på upp till 1920x1200
  • Stöd för 3,5 mm högtalare- och mikrofon-konsol
380,99 € EUR exkl. moms
476,24 € EUR inkl. moms

Överblick

Denna USB KVM låter dig ansluta fyra datorer, var och en med dubbla VGA-utgångar, till en arbetsstation med dubbla skärmar. Du kan växla arbetsstationen mellan varje dator, samt två extra USB-tillägg och 3,5 mm högtalare & mikrofon.

Maximera produktiviteten med dubbel video

Med stöd för två VGA-videoingångar och fyra olika datorer maximerar denna KVM-switch produktiviteten. Du får inte bara åtkomst till flera datorer, du kan dessutom använda två VGA-skärmar på varje dator och strömma oberoende innehåll till varje skärm, vilket ger dig friheten att multitaska och öka din produktivitet. VGA-portarna stöder upplösningar på upp till 1920x1200 för maximal skärmyta. 

Åtkomst till flera system

Denna KVM-switch har dubbel video, stöd för tangentbord och mus samt en USB-hubb med 2 portar för extra tillägg och är därför perfekt för att få åtkomst till fyra separata system från samma arbetsstation. Stödet för din arbetsstation plus två extra tillägg gör denna KVM idealisk för serverkontroll och förenklar åtkomst till flera datorsystem.

Problemfri användning

Denna KVM med 4 portar garanterar enkel användning med intuitiva genvägskommandon. Den är en enkel men ändå omfattande lösning för att växla mellan varje ansluten dator och stöder även manuell användning med hjälp av de lättanvända knapparna på switchens framsida.

SV431DVGAU2A täcks av StarTech.coms 2-årsgaranti och gratis livstidsgaranti på teknisk support.

Hyllmontera din KVM-switch

Om du vill montera denna KVM-switch till din serverhylla har StarTech.com ett 1U hyllmonteringsfäste (säljs separat) som gör om denna KVM till en hyllmonterbar KVM.

Användning

Kontrollera fyra datorer, var och en med dubbla videokort, för att öka din produktivitet på kontoret

Arbeta med multimedia-program som till exempel video- & fotoredigering

Använd flera datorer vid tillverkningslinjer

Installera i serverrummet för åtkomst till flera datorer

Tekniska specifikationer

Information om garanti
Garanti 2 Years
Hårdvara
Audio Ja
Flera skärmar 2
Hyllmonterbar Valfri
Kedjekoppling Nej
KVM-portar 4
Medföljande kablar Nej
PC-gränssnitt USB
PC-videotyp VGA
Prestanda
DVI-stöd Nej
Hot-Key Selection Ja
IP-kontroll Nej
Maximal analog upplösning 1920 x 1200
Maximalt antal användare 1
Skärmvisning (OSD) & stöd för snabbtangenter Nej
Stöd för portval Tryckknapp och genvägskommandon
Stödda upplösningar up to 1920 x 1200
Kontakt(er)
Konsolgränssnitt 2 - VGA (15-stifts, High Density D-Sub) Hona Output
1 - 3.5 mm minijack (3-polig) Hona Output
4 - USB Type-A (4-stifts) USB 2.0 Hona
Värdkontakter 8 - VGA (15-stifts, High Density D-Sub) Hona Input
8 - 3.5 mm minijack (3-polig) Hona Input
4 - USB B (4-stifts) Hona
Indikatorer
LED-indikatorer 1 - Grön - ström
4 - Grön - Dator identifierad
4 - Indikatorer för datorval
4 - Röd - Dator-indikator
Ström
Inspänning 110V-240V AC
Inström 0.8A
Kontakttyp M
Polaritet på mittpol Positiv
Power Source AC-adapter medföljer
Strömförbrukning 18
Utspänning 12 DC
Utström 1.5A
Miljö
Drifttemperatur 0°C to 40°C (32°F to 104°F)
Förvaringstemperatur -20°C to 60°C (-4°F to 140°F)
Luftfuktighet 90% RH
Utseende
Färg Svart
Kabinettyp Stål
Produktbredd 135 mm [5.3 in]
Produktdjup 130 mm [5.1 in]
Produkthöjd 60 mm [2.4 in]
Produktlängd 220 mm [8.7 in]
Produktvikt 1243 g [43.9 oz]
Förpackning
Fraktvikt (förpackning) 1780 g [62.8 oz]
Vad det är i lådan
Ingår i paketet 1 - Dubbel VGA USB KVM-switch
1 - universell strömadapter (NA/EU/UK/AU)
1 - Instruktionsbok

Certifikat

Relaterade produkter

KVM-switch med 2 portar med dubbel VGA - USB 2.0
SV231DVGAU2A
KVM-switch med 2 portar med dubbel VGA - USB 2.0

Få åtkomst till två dubbel-video-datorer och två delade USB-tillägg från en enda arbetsstation

259,99 € exkl. moms
324,99 € inkl. moms
DVI VGA KVM-switch för dubbla skärmar USB med 2 portar, audio & USB 2.0-hubb
SV231DDVDUA
DVI VGA KVM-switch för dubbla skärmar USB med 2 portar, audio & USB 2.0-hubb

Dela ett tangentbord och en mus samt 1 VGA- och 1 DVI-skärm mellan 2 multimediadatorer

250,99 € exkl. moms
313,74 € inkl. moms
DVI VGA KVM-switch för dubbla skärmar USB med 4 portar, audio & USB 2.0-hubb
SV431DDVDUA
DVI VGA KVM-switch för dubbla skärmar USB med 4 portar, audio & USB 2.0-hubb

Dela ett tangentbord och en mus samt 1 VGA- och 1 DVI-skärm mellan 4 multimediadatorer

373,99 € exkl. moms
467,49 € inkl. moms
Dubbel USB DisplayPort KVM-switch med 2 portar, audio & USB 2.0-hubb
SV231DPDDUA
Dubbel USB DisplayPort KVM-switch med 2 portar, audio & USB 2.0-hubb

Kontrollera två högupplösta dubbla DisplayPorts-datorer med en enda dator

369,99 € exkl. moms
462,49 € inkl. moms
Högupplöst USB DVI Dual Link KVM-switch med 2 portar och audio
SV231DVIUAHR
Högupplöst USB DVI Dual Link KVM-switch med 2 portar och audio

Kontrollera två multimediadatorer med högupplöst DVI från en enda konsol

256,99 € exkl. moms
321,24 € inkl. moms
4 Port Dual DVI USB KVM Switch with Audio & USB 2.0 Hub
SV431DD2DUA
4 Port Dual DVI USB KVM Switch with Audio & USB 2.0 Hub

Share a keyboard, mouse and dual DVI displays/monitors between 4 multimedia computers

479,99 € exkl. moms
599,99 € inkl. moms
USB DisplayPort KVM-switch med 4 portar och audio
SV431DPUA
USB DisplayPort KVM-switch med 4 portar och audio

Dela tangentbord, mus och DisplayPort-skärm mellan fyra HD multimedia-system

358,99 € exkl. moms
448,74 € inkl. moms
1U hyllmonterbart USB KVM-switch-paket med 16 portar, OSD och kablar
SV1631DUSBUK
1U hyllmonterbart USB KVM-switch-paket med 16 portar, OSD och kablar

Ett komplett USB KVM-paket med 16 portar med alla nödvändiga kablar och tillbehör

864,99 € exkl. moms
1 081,24 € inkl. moms

Tillbehör

Produktsupport

Vanliga frågor

Before You Buy

KVM stands for Keyboard Video Mouse and KVM switches allow you to switch the use of a keyboard, display and mouse between multiple computers.  KVM switches also commonly let you switch audio and USB devices between computers.

There are different types of KVM switches as well.

  • Standard box KVM switches. (e.g. SV231USB)
  • Cable KVM switches. (e.g. SV211USB)
  • Multi-Monitor KVM switches.  (e.g. SV231DDUSB)
  • IP KVM switches. (e.g. SV841HDIE)

Standard box and cable KVM switches are a simple way to switch the use of a keyboard, display, and mouse between multiple computers.  Multi-monitor KVM switches allow you to switch multiple displays between computers, and IP KVM switches allow you to remotely control the KVM switch and connected computers over a network.

Here are some important things to consider before purchasing a KVM switch.

  • How many computers do you need to control?  Purchase a KVM switch that supports the number of computers in your setup.
  • Which video connections do your computers and display(s) support?  It is best practice to use the same video connections wherever possible.
  • Will you be using a PS/2 or USB mouse and keyboard?
  • Do you need multiple monitor support?  Ensure every computer can support the number of monitors you are looking to use in your setup.
  • Do you need audio support?
  • What resolution(s) do you want your display(s) running at?  The KVM switch must support the resolution(s) you want to use.
  • Would you like hotkey support?  Some KVM switches support the use of hotkey combinations to complete tasks such as switching between computers.

There are a couple of other important things you may want to take note of:

  • Some KVM switches require proprietary cables to function.  These KVM cables may vary by each KVM switch.  For StarTech.com KVM switches that require proprietary cables, the KVM switches will either come with these cables, or they will be listed in the Accessories tab on the individual product pages.  For more information, see our video dedicated to KVM switch cables.
  • Basic mice and keyboards are recommended for use with KVM switches.  Wireless, gaming or combo mice and keyboards (mice and keyboards that use a single USB connection / receiver for both units) can cause performance issues, and in general, are not supported for use with KVM switches.

It can be difficult to tell which ones are right for the KVM switch you are interested in.  How can you tell which KVM cables you require?  How can you tell if a KVM switch requires proprietary cables?  How do these cables work? 

Standard KVM Switches and Cables

Note: You will need one bundle of KVM cables per computer you want to connect to the KVM switch.

Standard KVM switches have no special cable requirements.  If you have spare video and PS/2 or USB cables, you can use them to hook up the KVM switch to your computers.  StarTech.com still sells KVM cable packages, but they are just for the convenience of buying them in bundles and usually involve some savings.  Keep in mind that even if you have some of the cables you need, it still might be advantageous to buy the bundle.

KVM Switches with Opposite Gender Video Connections

Some KVM switches use male video connections for the computers and female video connections for the console ports.  In this case you simply need a video extension cable, or a KVM cable package appropriate to the KVM switch.  This is so you cannot accidentally plug cables from your computer into the console ports.

KVM Switches Requiring Proprietary Cables

KVM switches can also use proprietary KVM cables to connect to the individual computers.  This is often done with larger KVM switches and KVM switches intended for a server environment.  These cables use a proprietary pinout which does not conform to the video standard in use, as the cable carries both the video and PS/2 or USB data along a single cable.

If you are unsure whether or not you need special cables, complete the following:

  1. Check the Technical Specifications tab on the individual product pages for What's in the Box.  This section lists everything that comes with your purchase, and your KVM switch might come with the cables.
  2. Check the Accessories tab.  This section lists potential accessories for the product you are looking at.  StarTech.com will list the appropriate KVM cables for the KVM switch here. 
  3. Check the Gallery and look at a picture of the back of the KVM switch.

Note: If there are no PS/2 or USB ports on the back of the KVM switch other than for the console, you will require proprietary cables.

If at this point you require further assistance in deciding which cables to purchase with your StarTech.com KVM switch, contact our technical support team.  

Whether a specific mouse or keyboard will work with StarTech.com KVM switches can depend on the type of mouse or keyboard you use.  Any mice with additional functionality or keyboards that are not standard 104 key keyboards could cause issues.  This includes wireless, gaming, combination (one USB receiver for both the mouse and keyboard), and Apple keyboards.  We recommend that you use a standard wired mouse and keyboard with our KVM switches, especially when you troubleshoot issues.

If you cannot get a specific mouse or keyboard to work with your KVM switch, connect the mouse or keyboard into the USB hub ports, if available (they are marked on the back of the KVM switch). If the KVM switch has hotkey functionality, you will lose the functionality when using these hub ports.

This device outputs a VGA signal. If you have a display or video destination that uses another type of video connection, there are ways that you can convert the video signal or connection. These options are outlined below and organized by the target connection.

Target connection First conversion Second conversion (if required)
DVI-D VGA to HDMI: https://www.startech.com/AV/Converters/Video/?filter_AVINPUT=VGA&filter_AVOUTPUT=HDMI. HDMI to DVI-D: https://www.startech.com/AV/Converters/Video/?filter_AVINPUT=VGA&filter_AVOUTPUT=HDMI.
DVI-I VGA to DVI-I: https://www.startech.com/Cables/Audio-Video/Video-Adapter/DVIVGA/. N/A
HDMI

VGA to HDMI: https://www.startech.com/AV/Converters/Video/?filter_AVINPUT=VGA&filter_AVOUTPUT=HDMI.

N/A
DisplayPort VGA to HDMI: https://www.startech.com/AV/Converters/Video/?filter_AVINPUT=VGA&filter_AVOUTPUT=HDMI. HDMI to DisplayPort: https://www.startech.com/AV/Converters/Video/?filter_AVINPUT=HDMI&filter_AVOUTPUT=DisplayPort.

Note: You might need to use more than one converter as part of your solution; however, you should try to use the least number of converters and cables to connect your source and destination. If you have the option to convert to multiple target video connections, choose the option that requires the fewest number of conversions.

DVI-I and DVI-D

When you convert from VGA to DVI, you need to know if you are converting to a DVI-I or a DVI-D connection. For more information about how to identify the type of connection that you need, refer to the following FAQ: https://www.startech.com/faq/video_signal_converters_dvi_interface.

You also need to know which form of DVI that you are using, because DVI-I supports both analog (VGA) and digital (HDMI) signals, while DVI-D only supports digital (HDMI) signals.  

Note: Certain devices may have a DVI-I connection but only support DVI-D signaling. It is important to verify that your DVI-I device supports DVI-I signaling.

This device has a VGA input port.  If you have a video source that uses another video connection, there are options available to convert the video signal or connection. These options will be outlined below for each video source connection.

Source connection

Conversion

DVI-I

DVI-I to VGA: https://www.startech.com/DVIVGAMFBK.

DVI-D

DVI-D to VGA: https://www.startech.com/AV/Converters/Video/?filter_AVINPUT=DVI-D&filter_AVOUTPUT=VGA.

HDMI

HDMI to VGA: https://www.startech.com/AV/Converters/Video/?filter_AVINPUT=HDMI&filter_AVOUTPUT=VGA.

DisplayPort

DisplayPort to VGA: https://www.startech.com/AV/Displayport-Converters/DP-VGA/.

DVI-I and DVI-D

When you convert from DVI to VGA, you need to know if you are converting from a DVI-I or a DVI-D connection. For more information about how to identify the type of connection that you have, refer to the following FAQ: https://www.startech.com/faq/video_signal_converters_dvi_interface.

You also need to know which form of DVI that you are using, because DVI-I supports both analog (VGA) and digital (HDMI) signals, while DVI-D only supports digital (HDMI) signals.  Some DVI-I connections only support DVI-D signaling.  In this case, you must use a DVI-D to VGA converter.

Installation

  1. Turn off all of the computers and monitors that will be connected to the KVM switch.
  2. Connect the power adapter to the KVM switch.
  3. Connect the video cables from your monitors to the console video port on the KVM switch. 
  4. Turn on the monitors.
  5. Connect your keyboard and mouse to the console PS/2 or USB ports on the KVM switch.
  6. If you have not done so already, change the KVM switch to focus on port 1.
  7. Connect the video cables from PC1 to the KVM switch.
  8. Connect the PS/2 or USB cables from PC1 to the PC1 PS/2 or USB ports on the KVM switch.
  9. Turn on PC1. You should see the computer load the operating system that you are using on PC1.
  10. Make sure that the mouse and keyboard can control PC1.
  11. Repeat steps 4 to 8 for each additional computer that you want to connect to the KVM switch. Leave the computer in focus until you make sure that the mouse and keyboard can control the computer in step 8.

Problemsökning

There are some quick tests that you can perform to rule out potential issues. Start by turning off all of the connected computers and peripherals, unplugging everything from the KVM, including power, and leaving it for 10 seconds.  Then connect everything to the KVM following the procedure in the following FAQ: https://www.startech.com/faq/kvm-switches-setup.

You can test to make sure that the following components are working correctly and are not the source of the issue:

  • Video cables

  • KVM switch

  • Video source (such as a DVR or computer)

  • Video destination (such as a monitor or projector)

Note: When you are testing your setup components, it is recommended that you avoid using any video adapters. For example, if you are converting a VGA source to HDMI to be used with an HDMI extender, you should test with an HDMI source.

To test your setup components, try the following:

  • Use the video cable, KVM switch, video source, and video destination in another setup to see if the problem is with the components or the setup.

  • Use a different video cable, KVM switch, video source, and video destination in your setup to see if the problem persists. Ideally, you should test a component that you know works in another setup.

When you test your cables, it is recommended that you do the following:

  • Test each cable individually.

  • Use short cables when you are testing.

When you test the video source and video destination, it is recommended that you do the following:

  • Remove the KVM switch from your setup and test to make sure that the video source and video destination work together without the KVM switch.

  • Test to make sure that the video source and video destination work together at the resolution that you want to use.

Note: In order for your setup to work properly, the video source, KVM switch, and video destination all need to support the resolution that you are using.

There are four troubleshooting actions that you can try if some but not all of the ports and your computer are working with the KVM switch. 

  • To determine if a specific cable is the source of the problem, switch the cables that connect the KVM switch to the computers to one working port and computer, and one port and computer that is not working. Keep the computer plugged into the same ports and only switch the cables. If the issue persists when you switch cables, the issue may be with the cable itself.
  • To determine if the problem is between the computer and the KVM switch, using the same cables, connect the KVM switch to one computer that is working and one computer that is not working. If the issue persists when you switch computers, follows the issue may be with the computer and the KVM switch.
  • Try reinitializing the KVM.  This is done by following the setup instructions on the website.
  • To determine if the KVM switch is the source of the problem, if you have another KVM switch, disconnect the current KVM switch and connect the second KVM switch.

If the keys on your keyboard are repeating, complete the following:

  1. If the KVM you are using has USB ports, you can move your keyboard to the USB hub port on the back of the KVM (the USB hubs are marked).

Note: When you move the keyboard out of the keyboard port, you will not be able to access the hotkeys.

  1.  You can adjust the typematic rate in your operating system’s settings. Depending on the version of Windows you are running, you can adjust the typematic rate by doing one of the following:
    • Click Control Panel > Keyboard > Speed. Adjust the repeat delay and repeat rate until the keys no longer repeat.
    • Click Control Panel > Hardware and Sound > Devices and Printers. Right-click Keyboard Settings. Adjust the repeat delay and repeat rate until the keys no longer repeat.

För att du ska kunna föra muspekaren mellan dina skärmar måste skärmarna i Windows vara arrangerade så att de matchar dess fysiska placering på skrivbordet. Gör följande baserat på ditt operativsystem:

Windows 10 och Windows 8

  1. Tryck på Windows-knappen + X på tangentbordet och välj Kontrollpanelen.
  2. Klicka på Utseende och anpassning, och sedan på Bildskärm.
  3. Klicka på Skärmupplösning eller Ändra skärmupplösning i den vänstra kolumnen, vilket visar dina skärmar som numrerade ikoner.
  4. Klicka på Identifiera för att visa varje ansluten skärms nummer som visar hur operativsystemet har angett deras positioner.
  5. Klicka och dra skärmikonerna så att de matchar din fysiska uppställning.
  6. Klicka på OK för att godkänna ändringarna och stäng fönstret.

Windows 7 och Windows Vista

  1. Klicka på Start-knappen och välj Kontrollpanelen.
  2. Klicka på Utseende och anpassning, och sedan på Bildskärm.
  3. Klicka på Skärmupplösning eller Ändra skärmupplösning i den vänstra kolumnen, vilket visar dina skärmar som numrerade ikoner.
  4. Klicka på Identifiera för att visa varje ansluten skärms nummer som visar hur operativsystemet har angett deras positioner.
  5. Klicka och dra skärmikonerna så att de matchar din fysiska uppställning.
  6. Klicka på OK för att godkänna ändringarna och stäng fönstret.

Windows XP

  1. Klicka på Start-knappen och välj Kontrollpanelen.
  2. Dubbelklicka på Bildskärm.
  3. Klicka på fliken Inställningar, vilket visar dina skärmar som numrerade ikoner.
  4. Klicka på Identifiera för att visa varje ansluten skärms nummer som visar hur operativsystemet har angett deras positioner.
  5. Klicka och dra skärmikonerna så att de matchar din fysiska uppställning.
  6. Klicka på OK för att godkänna ändringarna och stäng fönstret.

För att spegla bilden från din primära skärm istället för att utöka skrivbordet, se följande FAQ: http://www.startech.com/faq/Windows_Mirroring_Monitors