Produktsökning

DisplayPort till DVI Dual Link aktiv adapter - DisplayPort till DVI-D adapter videokonverterare 2560x1600 60 Hz - DP 1.2 till DVI-skärm - USB-driven - Låsande DP-kontakt

Anslut din DVI Dual Link-skärm till en DisplayPort®-videokälla för tillämpningar med hög upplösning

Produkt ID: DP2DVID2

  • DISPLAYPORT TILL DVI-ADAPTER: DisplayPort 1.2 HBR2 till DVI-D dual-link adapter ansluter en DVI-skärm som stöder 2560x1600 60 Hz (dual-link) eller 1920x1200/1080p 120 Hz (single-link); HDCP-kompatibel; | 37 cm ansluten kabel | USB-driven | EDID Pass-through
  • KOMPATIBILITET: Aktiv videokonverterare stöder DP-källor (single mode) eller DP++-källor (multi-mode) inklusive arbetsstationer, stationära datorer (AMD/Nvidia), bärbara datorer, datorer med liten formfaktor och dockningsstationer
  • ANSLUT EN PRIMÄR ELLER SEKUNDÄR SKÄRM: Anslut en DVI-skärm eller projektor, eller lägg till en andra skärm för din arbetsstation | Kompakt design | Testad med DVI-kablar upp till 7,6 m | Stöder widescreen/ultrawide och Apple Cinema Display HD | Perfekt för digital skyltning
Ditt pris
€177,99 EUR excl. VAT
€222,49 EUR incl. VAT

DP2DVID2 DisplayPort® till DVI-adaptern (Dual-Link) konverterar aktivt utsignalen från en DisplayPort-videokälla för användning med en DVI-D-skärm (bildskärm, etc.) eller projektor, vilket hjälper till att eliminera utrustningskostnaderna för uppgradering av en DVI-skärm till en nyare modell på grund av kompatibilitetsproblem.

Adaptern stöder högupplöst video (upp till 2560x1600 vid 60 Hz), vilket upprätthåller den enastående grafiska prestandan från ett DisplayPort-utrustat videokort i en stationär dator, bärbar dator eller MacBook®.

DP2DVID2 utför en aktiv DisplayPort-DVI-konvertering som är lämplig för videokällor som matar ut antingen multimode (DP++) eller single-mode DisplayPort-signaler. Detta säkerställer att adaptern kan användas med grafikkort som inte kan sända multimode DP++-signaler, som till exempel ATI® Eyefinity-kort.

Täcks av StarTech.coms 3-årsgaranti med gratis livstidsgaranti på teknisk support.

Användning

  • Perfekt för stora skärmar som använder höga DVI-upplösningar med Dual-Link-konnektivitet
  • Använd din nya DisplayPort-enhet med din nuvarande DVI-bildskärm
  • DVI-bildskärmen är perfekt för att användas som en andra bildskärm
  • Den är perfekt för digitala underhållningscentra, hemmakontor, konferensrum för företag och visningar på mässor

Fördelarna med StarTech.com

  • Eliminerar kostnader genom att göra din DisplayPort-videoutgång kompatibel med en äldre DVI-D-skärm (dual link)
  • Lämplig för DisplayPort-videokort som inte kan mata ut DVI-signaler (dvs. single mode DisplayPort)

Partnernummer

  • Ingram Micro Sweden V932197
  • ALSO Sweden 000000000002764198
  • UPC 065030848749

Specifikationer

Warranty Information Warranty 3 Years
Förpackning Package Height 35 mm [1,4 in]
Package Length 14,3 cm [5,6 in]
Fraktvikt (förpackning) 232 g [8,2 oz]
Package Width 17,4 cm [6,9 in]
Hårdvara Active or Passive Adapter Aktiv
AV-ingång DisplayPort - 1.2
AV-utgång DVI-D - Dual-Link
Audio Nej
Kontakt(er) 1 - Connector A DisplayPort (20-stifts)
USB Type-A (4-stifts) USB 2.0
1 - Connector B DVI-D (25-stifts)
Miljö Drifttemperatur 0°C to 45°C (32°F to 113°F)
Förvaringstemperatur -20°C to 70°C (-4°F to 158°F)
Prestanda Audio-specifikationer DVI - No Audio Support
Maximal digital upplösning 2560x1600
Stödda upplösningar 2560 x 1600 @ 60 Hz
1920 x 1080 @ 120 Hz
1920 x 1200 @ 120 Hz
Stöd för widescreen Ja
Ström Power Source Strömförsörjd via USB
Särskilda anmärkningar/krav System- och kabelkrav 1 x DVI-D-kabel (Destination)
Utseende Produktvikt 160 g [5,6 oz]
Färg Svart
Kabinettyp Av plast
Kabellängd 37 cm [14,6 in]
Produktlängd 54,9 cm [21,6 in]
Produktbredd 64 mm [2,5 in]
Produkthöjd 22 mm [0,9 in]
Vad det är i lådan 1 - Ingår i paketet DisplayPort till DVI-adapter

Tillbehör

DVIDDMM30

9,1 m Dual Link DVI-D-kabel - M/M

Ger en kristallklar anslutning med hög hastighet till dina digitala DVI-enheter med en lång kabel på 9,1 meter

Ditt pris
€57,99 EUR excl. VAT
€72,49 EUR incl. VAT

Drivers/Downloads

Prata med en rådgivare.

Vi är alltid redo att hjälpa dig med alla dina frågor.

Direktchatt (opens in new window)

Manual(er):

Datasheet

Produktsupport

Prata med en rådgivare.

Vi är alltid redo att hjälpa dig med alla dina frågor.

Direktchatt (opens in new window)

Vanliga frågor

Installation

This device is plug and play. It does not use any drivers, and does not require any setup tasks other than plugging in the source (for example, a computer) and the destination (for example, a monitor).

Problemsökning

When you troubleshoot issues with a video adapter, there are some quick tests that you can complete to rule out potential problems. You can test to make sure that the following components are working correctly and are not the source of the issue:

  • Video cables

  • Video adapter

  • Video source (such as a DVD player or computer)

  • Video destination (such as a monitor or projector)

To test your setup components, try the following:

  • Use the cable, video adapter, video source, and video destination in another setup to see if the problem is with the components or the setup.

  • Use a different cable, video adapter, video source, and video destination in your setup to see if the problem persists. Ideally, you should test a component that you know works in another setup.

When you test your cables, it is recommended that you do the following:

  • Test each cable individually.

  • Use short cables when you are testing.

When you test the video source and video destination, it is recommended that you do the following:

  • Remove the video adapter from your setup and test to make sure that the video source and video destination work together without the video adapter.

  • Test to make sure that the video source and video destination work together at the resolution that you want to use.

Note: In order for your setup to work properly, the video source, adapter, and destination all need to support the resolution that you are using.

Try the following:

  1. Check that the monitor’s video port works with another source.
  2. Check that the cables between the source and the destination work with other equipment.
  3. Check whether the video adapter works with another source and another destination.

The error “Out of Range” normally means that the resolution being output by the computer is not compatible with the display. Try lowering the resolution to see if that helps resolve the issue.  You may need to connect another monitor or restart the computer or source to accomplish this.

Before You Buy

Unfortunately no, this device has an intended source and an intended destination.  Refer to the title of the webpage for this order.

Digital Visual Interface (DVI) is a video display interface that can contain different types of signaling, based on the application. DVI cables and ports are created using different connector types to identify what application they are intended to be used in. The connector types are identified by the number of pins on the DVI connector. DVI comes in the following five different connector types: 

Single and Dual link DVI indicate the maximum resolution capabilities of the video source or video destination. The maximum resolutions are Single Link (1920 x 1080 @ 60Hz) and Dual Link (2560 x 1600 @ 60Hz).

Note: The maximum resolution of your video source and video destination are ultimately determined by the technical specifications of the devices. The connector type is not a definitive indicator of the maximum resolution.

DVI-A carries only analog (for example, VGA) with no digital component. DVI-D carries only digital video (for example, HDMI) with no analog component. DVI-I combines DVI-A and DVI-D connections to include both analog and digital components. A DVI-I port may be on either your video source or display, but whether or not a display carries either or both analog and digital sources depends on the technical specifications of your device.

When you convert video from a source that uses DisplayPort or Mini DisplayPort to DVI or HDMI (for example, a computer to a monitor), you will need to consider the difference between passive and active adapters.

If the source supports dual-mode DisplayPort (also known as DP++), then you can use a passive adapter because the source can perform the conversion. If the source does not support DP++, then you need to use an active converter, which includes additional chips to perform the conversion.

Thunderbolt ports support DP++ natively. To run multiple monitors from the same computer, refer to the Active Adapters section below.

Passive Adapters

Passive adapters are less expensive since they do not need to include additional chips. A quick way to check whether you can use a passive adapter is to see if the DisplayPort or Mini DisplayPort source has the DP++ symbol above it. The symbol is a D with a P inside of it, with two + signs to the left, one on top of the other.

Active Adapters

Active adapters use additional chips to make the conversion inside the adapter, regardless of whether the source supports DP++. This means that active adapters are more expensive than passive adapters.

If you want to use multiple monitors with the same computer, you should use an active adapter because some video cards cannot run the maximum number of monitors while using DP++. This is especially true if the computer has more than one DisplayPort or Mini DisplayPort connection. Check with your video card manufacturer to confirm which type of adapter you need for the setup that you would like to run.

Note: You should use passive adapters with StarTech.com MST hubs, except when you are converting from DisplayPort to VGA, since that type of conversion requires active adapters.  For more information on using adapters with StarTech.com MST hubs, refer to the following FAQ: http://www.startech.com/faq/mst_hubs_passive_vs_active_adapters.

Surface Dock

If you experience issues when you connect passive video signal adapters to the Surface Dock, Microsoft recommends that you use active video signal converters instead. StarTech.com offers an active video signal converter for DVI monitors (MDP2DVIS) and for HDMI monitors (MDP2HD4KS).

Note: This issue does not apply to the Surface Pro 3 Docking Station.

Compliance and safety

Compliance letters

Safety Measures

  • If product has an exposed circuit board, do not touch the product under power.
  • If Class 1 Laser Product. Laser radiation is present when the system is open.
  • Wiring terminations should not be made with the product and/or electric lines under power.
  • Product installation and/or mounting should be completed by a certified professional as per the local safety and building code guidelines.
  • Cables (including power and charging cables) should be placed and routed to avoid creating electric, tripping or safety hazards.
* Produkters utseende och specifikationer kan komma att ändras utan förvarning.
Vänta...
Tillbaka till toppen