DisplayPort till HDMI-adapter med USB-audio

Anslut en HDMI®-skärm till en DisplayPort®-källa med audio

Produkt ID: DP2HDMIUSBA

  • DisplayPort®-video med genomströmning av USB-audio till en enda HDMI®-kabel
  • Stöder HDTV-upplösningar på upp till 1080p (1920x1080)
  • USB-driven - Ingen extern strömkälla behövs
Ditt pris
€87,99 EUR excl. VAT
€109,99 EUR incl. VAT

DP2HDMIUSBA adaptern för anslutning mellan DisplayPort® och HDMI® med USB-audio är en kostnadseffektiv lösning som låter dig ansluta en HDMI-kapabel HDTV till enhet med en DisplayPort-utgång så att du slipper uppgradera din TV.

Konverteraren/adaptern för anslutning mellan DisplayPort och HDMI har en kompakt design som tar upp minimalt med utrymme och strömförses via USB-anslutningen så att ingen otymplig extern strömkälla eller eluttag behövs. Koppla helt enkelt in de integrerade USB- och DisplayPort-kontakterna i din PC eller Mac® och använd önskad längd av HDMI-kabeln för att ansluta till TV:n/skärmen. Den analoga tvåkanalers audio-signalen passerar genom HDMI-anslutningen och levererar video-signalen och den tillhörande audio-signalen med en enda HDMI-kabel.

DP2HDMIUSBA är en passiv adapter som kräver en DP++-port (DisplayPort++), vilket betyder att även DVI och HDMI-signaler kan passera genom porten.

Täcks av StarTech.coms 3-årsgaranti och gratis livstidsgaranti på teknisk support.

Användning

  • Den är perfekt för digitala underhållningscentra, hemmakontor, konferensrum för företag och visningar på mässor
  • Behåll din befintliga HDMI®-skärm och använd den med din DisplayPort-enhet
  • Sänd audio/video från din DisplayPort-kapabla PC eller Mac till dina A/V-enheter (HDTV eller mottagare) för ett större visningsområde och högre ljud

Fördelarna med StarTech.com

  • Denna kompakta USB-drivna adapter för anslutning mellan DisplayPort® och HDMI® är en enkel lösning som minimerar röran genom att kombinera flera kablar (audio och video) till en
  • Stöd för USB-audio med genomströmning till en enda HDMI-kabel låter dig sända video och tillhörande audio även om DisplayPort-enheten bara kan sända video
  • Plug-and-play-lösning som inte behöver program/drivrutiner och du kommer igång på ett par sekunder

Partnernummer

  • Ingram Micro Sweden V931515
  • UPC 065030842792

Specifikationer

Warranty Information Warranty 3 Years
Förpackning Package Height 14 mm [0,6 in]
Package Length 22 cm [8,7 in]
Package Width 20 cm [7,9 in]
Fraktvikt (förpackning) 92 g [3,2 oz]
Hårdvara Active or Passive Adapter Passiv
AV-ingång DisplayPort - 1.2
DisplayPort - 1.2
AV-utgång HDMI - 1.4
Audio Ja
Industristandarder DisplayPort® 1.1a
Höghastighets-HDMI®
Indikatorer 1 - LED-indikatorer Röd - Ström
Kontakt(er) 1 - Connector A DisplayPort (20-stifts)
USB Type-A (4-stifts) USB 2.0
1 - Connector B HDMI (19-stifts)
Miljö Drifttemperatur 0°C to 70°C (32°F to 158°F)
Förvaringstemperatur -10°C to 80°C (14°F to 176°F)
Luftfuktighet 10~85 % RH
Prestanda Audio-specifikationer HDMI - 7.1 Channel Audio
Maximum Cable Distance To Display 15,2 m [49,9 ft]
Maximal digital upplösning 1920x1200 / 1080p
Stöd för widescreen Ja
Särskilda anmärkningar/krav System- och kabelkrav DP++-port (DisplayPort ++) behövs på videokortet eller videokällan (Stöd för genomströmning av DVI och HDMI måste finnas)
Ström Power Source Strömförsörjd via USB
Strömförbrukning 2W (max)
Utseende Färg Svart
Kabinettyp Av plast
Kabellängd 61 cm [24,0 in]
Produktlängd 70 cm [27,6 in]
Produktbredd 55 mm [2,2 in]
Produkthöjd 15 mm [0,6 in]
Produktvikt 0 g [0,0 oz]
Vad det är i lådan 1 - Ingår i paketet DisplayPoct och USB-audio till HDMI-adapter

Drivers/Downloads

Prata med en rådgivare.

Vi är alltid redo att hjälpa dig med alla dina frågor.

Direktchatt (opens in new window)

Manual(er):

Datasheet

Produktsupport

Prata med en rådgivare.

Vi är alltid redo att hjälpa dig med alla dina frågor.

Direktchatt (opens in new window)

Vanliga frågor

Installation

This device is plug and play. It does not use any drivers, and does not require any setup tasks other than plugging in the source (for example, a computer) and the destination (for example, a monitor).

Problemsökning

When you troubleshoot issues with a video adapter, there are some quick tests that you can complete to rule out potential problems. You can test to make sure that the following components are working correctly and are not the source of the issue:

  • Video cables

  • Video adapter

  • Video source (such as a DVD player or computer)

  • Video destination (such as a monitor or projector)

To test your setup components, try the following:

  • Use the cable, video adapter, video source, and video destination in another setup to see if the problem is with the components or the setup.

  • Use a different cable, video adapter, video source, and video destination in your setup to see if the problem persists. Ideally, you should test a component that you know works in another setup.

When you test your cables, it is recommended that you do the following:

  • Test each cable individually.

  • Use short cables when you are testing.

When you test the video source and video destination, it is recommended that you do the following:

  • Remove the video adapter from your setup and test to make sure that the video source and video destination work together without the video adapter.

  • Test to make sure that the video source and video destination work together at the resolution that you want to use.

Note: In order for your setup to work properly, the video source, adapter, and destination all need to support the resolution that you are using.

Try the following:

  1. Check that the monitor’s video port works with another source.
  2. Check that the cables between the source and the destination work with other equipment.
  3. Check whether the video adapter works with another source and another destination.

The error “Out of Range” normally means that the resolution being output by the computer is not compatible with the display. Try lowering the resolution to see if that helps resolve the issue.  You may need to connect another monitor or restart the computer or source to accomplish this.

If a DisplayPort converter with audio is not passing sound from the source to the destination, complete the following:

  1. Make sure that the DisplayPort connection on the video card is the default audio playback device.
  2. Make sure that the video card has the DisplayPort audio codec installed. If not, visit the video card manufacturer's website to find out how to update the video card driver.

Before You Buy

Unfortunately no, this device has an intended source and an intended destination.  Refer to the title of the webpage for this order.

When you convert video from a source that uses DisplayPort or Mini DisplayPort to DVI or HDMI (for example, a computer to a monitor), you will need to consider the difference between passive and active adapters.

If the source supports dual-mode DisplayPort (also known as DP++), then you can use a passive adapter because the source can perform the conversion. If the source does not support DP++, then you need to use an active converter, which includes additional chips to perform the conversion.

Thunderbolt ports support DP++ natively. To run multiple monitors from the same computer, refer to the Active Adapters section below.

Passive Adapters

Passive adapters are less expensive since they do not need to include additional chips. A quick way to check whether you can use a passive adapter is to see if the DisplayPort or Mini DisplayPort source has the DP++ symbol above it. The symbol is a D with a P inside of it, with two + signs to the left, one on top of the other.

Active Adapters

Active adapters use additional chips to make the conversion inside the adapter, regardless of whether the source supports DP++. This means that active adapters are more expensive than passive adapters.

If you want to use multiple monitors with the same computer, you should use an active adapter because some video cards cannot run the maximum number of monitors while using DP++. This is especially true if the computer has more than one DisplayPort or Mini DisplayPort connection. Check with your video card manufacturer to confirm which type of adapter you need for the setup that you would like to run.

Note: You should use passive adapters with StarTech.com MST hubs, except when you are converting from DisplayPort to VGA, since that type of conversion requires active adapters.  For more information on using adapters with StarTech.com MST hubs, refer to the following FAQ: http://www.startech.com/faq/mst_hubs_passive_vs_active_adapters.

Surface Dock

If you experience issues when you connect passive video signal adapters to the Surface Dock, Microsoft recommends that you use active video signal converters instead. StarTech.com offers an active video signal converter for DVI monitors (MDP2DVIS) and for HDMI monitors (MDP2HD4KS).

Note: This issue does not apply to the Surface Pro 3 Docking Station.

Compliance and safety

Compliance letters

  • WEEE
    • Språk: English
  • RoHS
    • Språk: English

Safety Measures

  • If product has an exposed circuit board, do not touch the product under power.
  • If Class 1 Laser Product. Laser radiation is present when the system is open.
  • Wiring terminations should not be made with the product and/or electric lines under power.
  • Product installation and/or mounting should be completed by a certified professional as per the local safety and building code guidelines.
  • Cables (including power and charging cables) should be placed and routed to avoid creating electric, tripping or safety hazards.
* Produkters utseende och specifikationer kan komma att ändras utan förvarning.
Tillbaka till toppen