Micro HDMI to VGA Adapter Converter with Audio for Smartphones / Ultrabooks / Tablets - 1920x1080

Convert a Micro HDMI® video signal to VGA, with discrete audio output

Produkt ID: MCHD2VGAA2

  • Supports output resolutions up to 1920x1080
  • Easy to use with no software required
  • Compact, lightweight, and portable design
Ditt pris
€48,99 EUR excl. VAT
€61,24 EUR incl. VAT

MCHD2VGAA2 Micro HDMI® till VGA Video-adapter gör att du kan ansluta en smarttelefon eller surfplatta som ger utdata via en Micro HDMI-anslutning till en VGA-kompatibel bildskärm (TV, bildskärm, projektor) och erbjuder även diskret 2-kanals analog ljudutgång från Micro HDMI®-källan. Adaptern för anslutning mellan Micro HDMI och VGA är avsedd för att visa användargenererat innehåll som presentationer, dokument och kalkylblad på en VGA-projektor eller -skärm.

Den här mångsidiga adaptern stöder utdata i HD, inklusive 1080p för HDTV-anslutningar och upp till 1920x1080 för datorskärmar med VGA.

MCHD2VGAA2 Video-adapter för anslutning mellan Micro HDMI® och VGA täcks av 3-årsgaranti och gratis livstidsgaranti på teknisk support.


  • Connect your smartphone or tablet to a VGA projector or display in boardrooms, hotel rooms, in the office, or at home

Fördelarna med StarTech.com

  • Adds value to an Ultrabook, tablet or smartphone equipped with Micro HDMI® output, by broadening compatibility with commonly available VGA display devices (Television, Monitor, Projector)
  • Saves the time and hassle of finding a power outlet/source, by not requiring an external power adapter


  • Ingram Micro Sweden V932825
  • ALSO Sweden 000000000002764216
  • UPC 065030851008


Warranty Information Warranty 3 Years
Förpackning Fraktvikt (förpackning) 58.0 g [2.0 oz]
Package Length 21.8 cm [8.6 in]
Package Width 80.0 mm [3.1 in]
Package Height 20.0 mm [0.8 in]
Hårdvara Active or Passive Adapter Aktiv
AV-utgång 3,5 mm stereoaudio
AV-ingång Micro HDMI
Audio Ja
Industristandarder HDMI®, HDCP
Kontakt(er) 1 - Connector B VGA (15-stifts, High Density D-Sub)
3.5 mm minijack (3-polig)
1 - Kontakttyp(er) USB Micro-B (5-stifts)
1 - Connector A Micro HDMI (19-stifts)
Miljö Drifttemperatur 0°C to 60°C (32°F to 140°F)
Förvaringstemperatur -10°C to 70°C (14°F to 158°F)
Luftfuktighet 40%-85%RH
Prestanda Maximal analog upplösning 1920x1080
Maximal digital upplösning 1920x1080 (1080p) @ 60Hz
Stödda upplösningar 1920x1080 (1080p) @ 60Hz
Stöd för widescreen Ja
Audio-specifikationer 2 Channel
Medeltid mellan fel (MTBF) 1,332,330 timmar
Utseende Produktvikt 39.0 g [1.4 oz]
Färg Svart
Kabinettyp Av plast
Kabellängd 175 mm [6.9 in]
Produktlängd 25.8 cm [10.2 in]
Produktbredd 45.0 mm [1.8 in]
Produkthöjd 1.5 cm [0.6 in]
Vad det är i lådan 1 - Ingår i paketet Micro HDMI® to VGA Adapter Converter


Prata med en rådgivare.

Vi är alltid redo att hjälpa dig med alla dina frågor.

Direktchatt (opens in new window)



Prata med en rådgivare.

Vi är alltid redo att hjälpa dig med alla dina frågor.

Direktchatt (opens in new window)

Vanliga frågor


This device is plug and play. It does not use any drivers, and does not require any setup tasks other than plugging in the source (for example, a computer) and the destination (for example, a monitor).


When you troubleshoot issues with a video adapter, there are some quick tests that you can complete to rule out potential problems. You can test to make sure that the following components are working correctly and are not the source of the issue:

  • Video cables

  • Video adapter

  • Video source (such as a DVD player or computer)

  • Video destination (such as a monitor or projector)

To test your setup components, try the following:

  • Use the cable, video adapter, video source, and video destination in another setup to see if the problem is with the components or the setup.

  • Use a different cable, video adapter, video source, and video destination in your setup to see if the problem persists. Ideally, you should test a component that you know works in another setup.

When you test your cables, it is recommended that you do the following:

  • Test each cable individually.

  • Use short cables when you are testing.

When you test the video source and video destination, it is recommended that you do the following:

  • Remove the video adapter from your setup and test to make sure that the video source and video destination work together without the video adapter.

  • Test to make sure that the video source and video destination work together at the resolution that you want to use.

Note: In order for your setup to work properly, the video source, adapter, and destination all need to support the resolution that you are using.

Try the following:

  1. Check that the monitor’s video port works with another source.
  2. Check that the cables between the source and the destination work with other equipment.
  3. Check whether the video adapter works with another source and another destination.

The error “Out of Range” normally means that the resolution being output by the computer is not compatible with the display. Try lowering the resolution to see if that helps resolve the issue.  You may need to connect another monitor or restart the computer or source to accomplish this.

This is likely a High-bandwidth Digital Content Protection (HDCP) issue. If you are converting a video signal from a device that can play copyright-protected content, HDCP will block the conversion to an analog signal (for example, VGA) or to any video capture cards.

You will likely run into this issue when you use devices like Blu-ray players, DVD players, and certain gaming consoles. For more information on HDCP and gaming consoles, refer to the following FAQ: https://www.startech.com/faq/video_capture_cards_video_game_console_compatibility.

Some video cards also output an HDCP signal full time. In this case there should be an option for your video card to disable this feature. You might need to contact the manufacturer of your video card for more information.

Adhering to HDCP is required for converting all digital signals to analog signals or to video capture cards. Unfortunately, there is nothing you can do in these situations other than convert to a digital display.

Certain HDMI sources have known issues where they do not output enough power over HDMI to power HDMI adapters.  In this case, it is best to consider HDMI adapters with external power over USB or with an external power adapter. This affects our HDMI to VGA adapters. See below for alternative solutions.

Standard HDMI to VGA

Our HD2VGAA2 has both audio and a USB Micro B port for external power.

Micro HDMI to VGA

Our MCHD2VGAA2 has both audio and a USB Micro B port for external power.

Mini HDMI to VGA

Our HDACFM lets you adapt from standard HDMI to Mini HDMI. You can pair this with our HD2VGAA2 to go from Mini HDMI to VGA with external power.

Before You Buy

Unfortunately no, this device has an intended source and an intended destination.  Refer to the title of the webpage for this order.

This is an active video signal converter.  

A passive video signal converter changes the type of connection that is being used but does not change the signal that passes through the converter. Because the video signal is not modified, passive converters tend to be smaller, simpler, and less expensive than active video signal converters. Examples of passive converters include DVI-I to VGA, HDMI to DVI, and DisplayPort to Mini-DisplayPort converters.

An active video signal converter modifies both the type of connection that is being used and the signal that passes through the converter. Because this type of conversion can be complex, active converters tend to be larger than passive video signal converters and sometimes require additional power. Examples of active converters include DVI-D to VGA, HDMI to DisplayPort, and VGA to HDMI converters.

For more information about passive and active DisplayPort video signal converters, refer to the following FAQ: https://www.startech.com/faq/DisplayPort_Converter_DP_Multi_Mode.

For more information about which type of video signal converter you should use when you convert video signals with an MST hub, refer to the following FAQ: https://www.startech.com/faq/mst_hubs_passive_vs_active_adapters.

Compliance and safety

Compliance letters

Safety Measures

  • If product has an exposed circuit board, do not touch the product under power.
  • If Class 1 Laser Product. Laser radiation is present when the system is open.
  • Wiring terminations should not be made with the product and/or electric lines under power.
  • Product installation and/or mounting should be completed by a certified professional as per the local safety and building code guidelines.
  • Cables (including power and charging cables) should be placed and routed to avoid creating electric, tripping or safety hazards.
* Produkters utseende och specifikationer kan komma att ändras utan förvarning.
Tillbaka till toppen