10 ft Mini DisplayPort to DVI Adapter Converter Cable – Mini DP to DVI 1920x1200 - White

Connect a DVI display to a Mini DisplayPort-equipped PC or MAC® over a longer 10 foot distance – White

Produkt ID: MDP2DVIMM10W

  • 1x Male Mini DisplayPort connector, 1x Male DVI connector
  • Supports resolutions up to 1920x1200 (WUXGA) and HDTV resolutions up to 1080p
  • Compatible with Intel® Thunderbolt™ devices that are capable of outputting a DisplayPort signal
Ditt pris
€41,99 EUR excl. VAT
€52,49 EUR incl. VAT

MDP2DVIMM10W kabeladapter för anslutning mellan Mini DisplayPort och DVI låter dig ansluta din videokälla med Mini DP (som t.ex. någon av dina MacBook® eller Microsoft® Surface™ Pro-enheter med mDP) direkt till en DVI-monitor eller -projektor och du slipper kostnaden av att uppgradera till en skärm med Mini DisplayPort.

Adapterkabeln är 3 meter lång och har hane-till-hane-kontakter, så att du kan ansluta din Mini DisplayPort-källa direkt till en DVI-skärm utan extra kabeldragning.

Kompatibel med Intel® Thunderbolt™ och när den ansluts direkt till en kompatibel DisplayPort över Thunderbolt I/O-porten, stöder adaptern dessutom upplösningar upp till 1920x1200 (WUXGA).

MDP2DVIMM10W är en passiv adapter som kräver en dubbelläges DisplayPort-port (DisplayPort++). Det betyder att även DVI- och HDMI-signaler kan gå igenom porten.

Täcks av StarTech.coms 3-årsgaranti och gratis livstidsgaranti på teknisk support.

Användning

  • Connect your existing DVI display device (monitor, projector) to a Mini DisplayPort output device
  • Ideal for using your DVI monitor as a secondary display

Fördelarna med StarTech.com

  • Connect a Mini DisplayPort source directly to a DVI monitor or projector, with a single male-male cable

Partnernummer

  • Ingram Micro Sweden V932830
  • UPC 065030851510

Specifikationer

Warranty Information Warranty 3 Years
Förpackning Package Height 0 mm [0,0 in]
Package Length 0 mm [0,0 in]
Package Width 0 mm [0,0 in]
Fraktvikt (förpackning) 0 g [0,0 oz]
Hårdvara Active or Passive Adapter Passiv
AV-ingång Mini DisplayPort - 1.2
Adapterstil Kabeladaptrar
AV-utgång DVI-D - Single-Link
Audio Nej
Chipset-ID NXP - 3361
Kontakt(er) 1 - Connector A Mini-DisplayPort (20-stifts)
1 - Connector B DVI-D (25-stifts)
Miljö Drifttemperatur 0°C to 60°C (32°F to 140°F)
Förvaringstemperatur 0°C to 70°C (32°F to 158°F)
Luftfuktighet 40%-85%RH
Prestanda Audio-specifikationer DVI - No Audio Support
Maximal kabellängd 3,0 m [10,0 ft]
Maximal digital upplösning 1920x1200 / 1080p
Stöd för widescreen Ja
Särskilda anmärkningar/krav System- och kabelkrav DP++ (DisplayPort++) port required from video card or video source for DVI and HDMI® signal pass-through
Utseende Färg Vit
Kabellängd 3,0 m [10,0 ft]
Produktlängd 0 mm [0,0 in]
Produktbredd 0 mm [0,0 in]
Produkthöjd 0 mm [0,0 in]
Produktvikt 0 g [0,0 oz]
Vad det är i lådan 1 - Ingår i paketet Mini DisplayPort® to DVI Adapter

Drivers/Downloads

Prata med en rådgivare.

Vi är alltid redo att hjälpa dig med alla dina frågor.

Direktchatt (opens in new window)

Datasheet

Produktsupport

Prata med en rådgivare.

Vi är alltid redo att hjälpa dig med alla dina frågor.

Direktchatt (opens in new window)

Vanliga frågor

Installation

This device is plug and play. It does not use any drivers, and does not require any setup tasks other than plugging in the source (for example, a computer) and the destination (for example, a monitor).

Problemsökning

When you troubleshoot issues with a video adapter, there are some quick tests that you can complete to rule out potential problems. You can test to make sure that the following components are working correctly and are not the source of the issue:

  • Video cables

  • Video adapter

  • Video source (such as a DVD player or computer)

  • Video destination (such as a monitor or projector)

To test your setup components, try the following:

  • Use the cable, video adapter, video source, and video destination in another setup to see if the problem is with the components or the setup.

  • Use a different cable, video adapter, video source, and video destination in your setup to see if the problem persists. Ideally, you should test a component that you know works in another setup.

When you test your cables, it is recommended that you do the following:

  • Test each cable individually.

  • Use short cables when you are testing.

When you test the video source and video destination, it is recommended that you do the following:

  • Remove the video adapter from your setup and test to make sure that the video source and video destination work together without the video adapter.

  • Test to make sure that the video source and video destination work together at the resolution that you want to use.

Note: In order for your setup to work properly, the video source, adapter, and destination all need to support the resolution that you are using.

Try the following:

  1. Check that the monitor’s video port works with another source.
  2. Check that the cables between the source and the destination work with other equipment.
  3. Check whether the video adapter works with another source and another destination.

The error “Out of Range” normally means that the resolution being output by the computer is not compatible with the display. Try lowering the resolution to see if that helps resolve the issue.  You may need to connect another monitor or restart the computer or source to accomplish this.

Before You Buy

Unfortunately no, this device has an intended source and an intended destination.  Refer to the title of the webpage for this order.

Digital Visual Interface (DVI) is a video display interface that can contain different types of signaling, based on the application. DVI cables and ports are created using different connector types to identify what application they are intended to be used in. The connector types are identified by the number of pins on the DVI connector. DVI comes in the following five different connector types: 

Single and Dual link DVI indicate the maximum resolution capabilities of the video source or video destination. The maximum resolutions are Single Link (1920 x 1080 @ 60Hz) and Dual Link (2560 x 1600 @ 60Hz).

Note: The maximum resolution of your video source and video destination are ultimately determined by the technical specifications of the devices. The connector type is not a definitive indicator of the maximum resolution.

DVI-A carries only analog (for example, VGA) with no digital component. DVI-D carries only digital video (for example, HDMI) with no analog component. DVI-I combines DVI-A and DVI-D connections to include both analog and digital components. A DVI-I port may be on either your video source or display, but whether or not a display carries either or both analog and digital sources depends on the technical specifications of your device.

When you convert video from a source that uses DisplayPort or Mini DisplayPort to DVI or HDMI (for example, a computer to a monitor), you will need to consider the difference between passive and active adapters.

If the source supports dual-mode DisplayPort (also known as DP++), then you can use a passive adapter because the source can perform the conversion. If the source does not support DP++, then you need to use an active converter, which includes additional chips to perform the conversion.

Thunderbolt ports support DP++ natively. To run multiple monitors from the same computer, refer to the Active Adapters section below.

Passive Adapters

Passive adapters are less expensive since they do not need to include additional chips. A quick way to check whether you can use a passive adapter is to see if the DisplayPort or Mini DisplayPort source has the DP++ symbol above it. The symbol is a D with a P inside of it, with two + signs to the left, one on top of the other.

Active Adapters

Active adapters use additional chips to make the conversion inside the adapter, regardless of whether the source supports DP++. This means that active adapters are more expensive than passive adapters.

If you want to use multiple monitors with the same computer, you should use an active adapter because some video cards cannot run the maximum number of monitors while using DP++. This is especially true if the computer has more than one DisplayPort or Mini DisplayPort connection. Check with your video card manufacturer to confirm which type of adapter you need for the setup that you would like to run.

Note: You should use passive adapters with StarTech.com MST hubs, except when you are converting from DisplayPort to VGA, since that type of conversion requires active adapters.  For more information on using adapters with StarTech.com MST hubs, refer to the following FAQ: http://www.startech.com/faq/mst_hubs_passive_vs_active_adapters.

Surface Dock

If you experience issues when you connect passive video signal adapters to the Surface Dock, Microsoft recommends that you use active video signal converters instead. StarTech.com offers an active video signal converter for DVI monitors (MDP2DVIS) and for HDMI monitors (MDP2HD4KS).

Note: This issue does not apply to the Surface Pro 3 Docking Station.

Compliance and safety

Compliance letters

  • WEEE
    • Språk: English
  • RoHS
    • Språk: English

Safety Measures

  • If product has an exposed circuit board, do not touch the product under power.
  • If Class 1 Laser Product. Laser radiation is present when the system is open.
  • Wiring terminations should not be made with the product and/or electric lines under power.
  • Product installation and/or mounting should be completed by a certified professional as per the local safety and building code guidelines.
  • Cables (including power and charging cables) should be placed and routed to avoid creating electric, tripping or safety hazards.
* Produkters utseende och specifikationer kan komma att ändras utan förvarning.
Tillbaka till toppen