Aktiv konverteraradapterkabel för Mini DisplayPort till DVI på 1,8 m - mDP till DVI 1920x1200 - Svart

Anslut en Mini DisplayPort-utrustad PC eller Mac till en DVI-skärm med en aktiv kabel på 1,8 m

Produkt ID: MDP2DVIMM6BS

  • Aktiv Mini DisplayPort till DVI-konvertering
  • 1 x DisplayPort-hankontakt, 1 x DVI-hankontakt
  • Kompatibel med Intel® Thunderbolt™-enheter som kan sända en DisplayPort-signal
Ditt pris
€50,99 EUR excl. VAT
€63,74 EUR incl. VAT

MDP2DVIMM6BS 1,8 m aktiv kabeladapter för anslutning mellan Mini DisplayPort och DVI-D låter dig ansluta din videokälla med Mini DP (som t.ex. någon av dina MacBook® eller Microsoft® Surface™ Pro-enheter med mDP) direkt till en DVI-monitor eller -projektor, vilket sparar kostnader för ytterligare adaptrar.

För garanterad kompatibilitet med i stort sett vilken Mini DisplayPort-utdata som helst stöder den aktiva Mini DP till DVI-adaptern DisplayPort-signaler i multiläge (DP++) samt enkelläge. Till skillnad från passiva adaptrar säkerställer detta att MDP2DVIMM6BS kan användas med grafikkort som inte kan sända DP++-signaler i multiläge, som till exempel ATI® Eyefinity-kort.

Adaptern stöder upplösningar på upp till 1920x1200 och är kompatibel med Intel® Thunderbolt™, vid direktanslutning till en kompatibel DisplayPort över Thunderbolt™ I/O-port.

MDP2DVIMM6BS täcks av StarTech.coms 3-årsgaranti och gratis livstidsgaranti på teknisk support.

Obs.:

Denna adapter är inte kompatibel med Apple Cinema Display.

Användning

  • Använd med Mini DisplayPort-videoenheter med enkelläge som inte kan sända DP++-signaler i multiläge, som till exempel ATI® Eyefinity-videokort
  • Anslut din DVI-visningsenhet (skärm, projektor) direkt till en Mini DisplayPort-utenhet
  • DVI-bildskärmen är perfekt för att användas som en andra bildskärm

Fördelarna med StarTech.com

  • Problemfri installation med kabelliknande adapter som låter dig ansluta din Mini DisplayPort-källa direkt till en DVI-skärm utan extra videokablar
  • Slipp uppgraderingskostnader genom att ansluta din Mini DisplayPort-dator till en DVI-skärm eller -projektor

Partnernummer

  • Ingram Micro Sweden V933019
  • ALSO Sweden 000000000002764143
  • UPC 065030854931

Specifikationer

Warranty Information Warranty 3 Years
Förpackning Package Height 0 mm [0,0 in]
Package Length 0 mm [0,0 in]
Fraktvikt (förpackning) 0 g [0,0 oz]
Package Width 0 mm [0,0 in]
Hårdvara Active or Passive Adapter Aktiv
AV-ingång Mini DisplayPort - 1.2
AV-utgång DVI-D - Single-Link
Adapterstil Kabeladaptrar
Audio Nej
Chipset-ID Parade - PS171
Kontakt(er) 1 - Connector A Mini-DisplayPort (20-stifts)
1 - Connector B DVI-D (25-stifts)
Miljö Drifttemperatur 0°C to 60°C (32°F to 140°F)
Förvaringstemperatur -10°C to 70°C (14°F to 158°F)
Luftfuktighet 40 %-85 %RH
Prestanda Audio-specifikationer DVI - No Audio Support
Maximal kabellängd 0 mm [0,0 in]
Maximal digital upplösning 1920 x 1200
Stödda upplösningar 1024 x 768
1280 x 720
1920 x 1080
1920 x 1200
Stöd för widescreen Ja
Medeltid mellan fel (MTBF) 1,291,679 timmar
Särskilda anmärkningar/krav System- och kabelkrav Some dual-link DVI monitors manufactured prior to 2014 may have limited resolutions support when used with this adapter.
This adapter is not compatible for use with the Apple Cinema Display.
Utseende Produktvikt 0 g [0,0 oz]
Färg Svart
Kabellängd 1,9 m [6,1 ft]
Produktlängd 0 mm [0,0 in]
Produktbredd 0 mm [0,0 in]
Produkthöjd 0 mm [0,0 in]
Vad det är i lådan 1 - Ingår i paketet Aktiv DisplayPort till DVI-adapter

Tillbehör

USB32DP4K

USB 3.0 till DisplayPort-adapter - DisplayLink certifierad - 4K 30 Hz

USB 3.0 externt grafikkort | Flera bildskärmar | USB-drift | Stöder Mac och Windows®

Ditt pris
€126,99 EUR excl. VAT
€158,74 EUR incl. VAT
USB32DPPRO

USB 3.0 till DisplayPort adapter- 2560x1600

USB 3.0 externt grafikkort | Flera bildskärmar | USB-drift | Stöder Mac och Windows®

Ditt pris
€123,99 EUR excl. VAT
€154,99 EUR incl. VAT
Utgått
USB32DPES

Smal USB 3.0 till DisplayPort-adapter - 2048x1152 och 1080p

Anslut din Ultrabook eller bärbara dator till en DP-skärm med hjälp av ett externt USB-videokort

Ditt pris
€87,99 EUR excl. VAT
€109,99 EUR incl. VAT
DPEXT6L

6 ft DisplayPort Video Extension Cable - M/F

Extend the reach of your DisplayPort devices by 6ft

Ditt pris
€31,99 EUR excl. VAT
€39,99 EUR incl. VAT
DPPNLFM3

3ft DisplayPort Panel Mount Cable - F/M

Allows a DisplayPort connection to be mounted on a secure easily accessible panel.

Ditt pris
€17,99 EUR excl. VAT
€22,49 EUR incl. VAT
Utgått
DPEXTAA6IN

6in DisplayPort Port Saver Cable – M/F

Protects DisplayPort® video card and monitor interfaces from damage and wear

Ditt pris
€12,99 EUR excl. VAT
€16,24 EUR incl. VAT

Drivers/Downloads

Prata med en rådgivare.

Vi är alltid redo att hjälpa dig med alla dina frågor.

Direktchatt (opens in new window)

Datasheet

Produktsupport

Prata med en rådgivare.

Vi är alltid redo att hjälpa dig med alla dina frågor.

Direktchatt (opens in new window)

Vanliga frågor

Installation

This device is plug and play. It does not use any drivers, and does not require any setup tasks other than plugging in the source (for example, a computer) and the destination (for example, a monitor).

Problemsökning

When you troubleshoot issues with a video adapter, there are some quick tests that you can complete to rule out potential problems. You can test to make sure that the following components are working correctly and are not the source of the issue:

  • Video cables

  • Video adapter

  • Video source (such as a DVD player or computer)

  • Video destination (such as a monitor or projector)

To test your setup components, try the following:

  • Use the cable, video adapter, video source, and video destination in another setup to see if the problem is with the components or the setup.

  • Use a different cable, video adapter, video source, and video destination in your setup to see if the problem persists. Ideally, you should test a component that you know works in another setup.

When you test your cables, it is recommended that you do the following:

  • Test each cable individually.

  • Use short cables when you are testing.

When you test the video source and video destination, it is recommended that you do the following:

  • Remove the video adapter from your setup and test to make sure that the video source and video destination work together without the video adapter.

  • Test to make sure that the video source and video destination work together at the resolution that you want to use.

Note: In order for your setup to work properly, the video source, adapter, and destination all need to support the resolution that you are using.

Try the following:

  1. Check that the monitor’s video port works with another source.
  2. Check that the cables between the source and the destination work with other equipment.
  3. Check whether the video adapter works with another source and another destination.

The error “Out of Range” normally means that the resolution being output by the computer is not compatible with the display. Try lowering the resolution to see if that helps resolve the issue.  You may need to connect another monitor or restart the computer or source to accomplish this.

Before You Buy

Unfortunately no, this device has an intended source and an intended destination.  Refer to the title of the webpage for this order.

Digital Visual Interface (DVI) is a video display interface that can contain different types of signaling, based on the application. DVI cables and ports are created using different connector types to identify what application they are intended to be used in. The connector types are identified by the number of pins on the DVI connector. DVI comes in the following five different connector types: 

Single and Dual link DVI indicate the maximum resolution capabilities of the video source or video destination. The maximum resolutions are Single Link (1920 x 1080 @ 60Hz) and Dual Link (2560 x 1600 @ 60Hz).

Note: The maximum resolution of your video source and video destination are ultimately determined by the technical specifications of the devices. The connector type is not a definitive indicator of the maximum resolution.

DVI-A carries only analog (for example, VGA) with no digital component. DVI-D carries only digital video (for example, HDMI) with no analog component. DVI-I combines DVI-A and DVI-D connections to include both analog and digital components. A DVI-I port may be on either your video source or display, but whether or not a display carries either or both analog and digital sources depends on the technical specifications of your device.

When you convert video from a source that uses DisplayPort or Mini DisplayPort to DVI or HDMI (for example, a computer to a monitor), you will need to consider the difference between passive and active adapters.

If the source supports dual-mode DisplayPort (also known as DP++), then you can use a passive adapter because the source can perform the conversion. If the source does not support DP++, then you need to use an active converter, which includes additional chips to perform the conversion.

Thunderbolt ports support DP++ natively. To run multiple monitors from the same computer, refer to the Active Adapters section below.

Passive Adapters

Passive adapters are less expensive since they do not need to include additional chips. A quick way to check whether you can use a passive adapter is to see if the DisplayPort or Mini DisplayPort source has the DP++ symbol above it. The symbol is a D with a P inside of it, with two + signs to the left, one on top of the other.

Active Adapters

Active adapters use additional chips to make the conversion inside the adapter, regardless of whether the source supports DP++. This means that active adapters are more expensive than passive adapters.

If you want to use multiple monitors with the same computer, you should use an active adapter because some video cards cannot run the maximum number of monitors while using DP++. This is especially true if the computer has more than one DisplayPort or Mini DisplayPort connection. Check with your video card manufacturer to confirm which type of adapter you need for the setup that you would like to run.

Note: You should use passive adapters with StarTech.com MST hubs, except when you are converting from DisplayPort to VGA, since that type of conversion requires active adapters.  For more information on using adapters with StarTech.com MST hubs, refer to the following FAQ: http://www.startech.com/faq/mst_hubs_passive_vs_active_adapters.

Surface Dock

If you experience issues when you connect passive video signal adapters to the Surface Dock, Microsoft recommends that you use active video signal converters instead. StarTech.com offers an active video signal converter for DVI monitors (MDP2DVIS) and for HDMI monitors (MDP2HD4KS).

Note: This issue does not apply to the Surface Pro 3 Docking Station.

Compliance and safety

Compliance letters

  • WEEE
    • Språk: English
  • RoHS
    • Språk: English

Safety Measures

  • If product has an exposed circuit board, do not touch the product under power.
  • If Class 1 Laser Product. Laser radiation is present when the system is open.
  • Wiring terminations should not be made with the product and/or electric lines under power.
  • Product installation and/or mounting should be completed by a certified professional as per the local safety and building code guidelines.
  • Cables (including power and charging cables) should be placed and routed to avoid creating electric, tripping or safety hazards.
* Produkters utseende och specifikationer kan komma att ändras utan förvarning.
Tillbaka till toppen