Mini DisplayPort till HDMI 4K-konverterare – Mini DisplayPort 1.2 till HDMI aktiv adapter för Mac Book Pro / Mac Book Air – 4K @ 30 Hz

Connect an HDMI Display to a Single Mode Mini DisplayPort video source

Produkt ID: MDP2HD4KSW

  • Stöder videoupplösningar på upp till 4K
  • Fullt kompatibel med DisplayPort 1.2
  • Stöder HDMI 4K @ 30 Hz
Ditt pris
€36,99 EUR excl. VAT
€46,24 EUR incl. VAT

Med MDP2HD4KSW Mini DisplayPort till HDMI-adaptern kan du ansluta enheter som till exempel MacBook® Pro, MacBook® Air och alla Microsoft® Surface™ Pro-enheter med mDP till alla HDMI-skärmar.

Med stöd för Ultra HD (4K) garanterar mDP till HDMI-adaptern att du kan konvertera Mini DisplayPort till HDMI och samtidigt bibehålla en enastående bildkvalitet med fyra gånger högre upplösning än HD i 1080p. Adaptern är dessutom bakåtkompatibel med tidigare DisplayPort-versioner 1.0/1.1 med stöd för upplösningar på upp till 1080p.

För en problemfri installation tillåter Mini DisplayPort till HDMI-adaptern plug-and-play-installation utan extra mjukvara eller drivrutiner. Dessutom har adaptern en liten storlek och låg vikt för maximal bärbarhet.

För att garantera kompatibilitet med alla Mini DisplayPort-utgångar har mDP-adaptern aktiv konvertering. Aktiv videokonvertering krävs för att bibehålla 4K-upplösningar vid konvertering av Mini DisplayPort till HDMI. En aktiv mDP-adapter är även idealisk för att sända upplösning i 1080p genom att garantera kompatibilitet med grafikkort som inte kan sända DP++ signaler i multiläge (t.ex. ATI Eyefinity).

För att ge stöd åt din Mac® är HDMI-konverteraren kompatibel med Intel® Thunderbolt™-enheter som sänder en DisplayPort-videosignal.

Med en slimmad och stilren vit design passar MDP2HD4KSW perfekt jämte din Mac® och täcks av en 3-årsgaranti från StarTech.com och livstidsgaranti på teknisk support.

Användning

  • Anslut din 4K HDMI-skärm till en Mini DisplayPort-port
  • Ta den med dig tillsammans med den bärbara datorn för BYOD-tillämpningar på kontoret
  • Använd en HDMI-skärm som en sekundär skärm för din Mini DisplayPort-dator
  • Använd din Thunderbolt-port för att ansluta din MacBook Pro/MacBook Air till en HDMI-skärm

Fördelarna med StarTech.com

  • Förbered dig för nästa generations skärmar med stöd för Ultra HD 4K-video
  • Maximera kompatibilitet, med stöd för DisplayPort 1.2/1.1/1.0
  • Lätt att ta med sig som tillbehör till den bärbara datorn, med en kompakt design och inget behov av extern strömadapter

Partnernummer

  • Ingram Micro Sweden V933209
  • ALSO Sweden 000000000002763936
  • UPC 065030857376

Specifikationer

Warranty Information Warranty 3 Years
Förpackning Package Height 13 mm [0,5 in]
Package Length 18,8 cm [7,4 in]
Fraktvikt (förpackning) 22 g [0,8 oz]
Package Width 10,3 cm [4,1 in]
Hårdvara Active or Passive Adapter Aktiv
AV-ingång Mini DisplayPort - 1.2
Portar 1
Adapterstil Adaptrar
AV-utgång HDMI - 1.4
Audio Ja
Industristandarder DPCP (DisplayPort Content Protection)
HDCP (High Definition Content Protection)
DisplayPort 1.2
HDMI 1.4
Kontakt(er) 1 - Connector A Mini-DisplayPort (20-stifts)
1 - Connector B HDMI (19-stifts)
Miljö Drifttemperatur 0°C to 70°C (32°F to 158°F)
Förvaringstemperatur -10°C to 80°C (14°F to 176°F)
Luftfuktighet 10%-85%
Prestanda Audio-specifikationer HDMI - 7.1 Channel Audio
Maximum Cable Distance To Display 15,2 m [49,9 ft]
Maximal digital upplösning 4K x 2K @ 30 Hz
Stödda upplösningar 4k x 2K (Ultra HD)
1920x1200
1920x1080 (1080p)
1280x720 (720p)
Stöd för widescreen Ja
Utseende Produkthöjd 0 mm [0,0 in]
Produktlängd 15 cm [5,9 in]
Produktvikt 16 g [0,6 oz]
Produktbredd 0 mm [0,0 in]
Färg Vit
Kabellängd 15 cm [5,9 in]
Vad det är i lådan 1 - Ingår i paketet Mini DisplayPort till HDMI aktiv adapter

Drivers/Downloads

Prata med en rådgivare.

Vi är alltid redo att hjälpa dig med alla dina frågor.

Direktchatt (opens in new window)

Datasheet

Produktsupport

Prata med en rådgivare.

Vi är alltid redo att hjälpa dig med alla dina frågor.

Direktchatt (opens in new window)

Vanliga frågor

Installation

This device is plug and play. It does not use any drivers, and does not require any setup tasks other than plugging in the source (for example, a computer) and the destination (for example, a monitor).

Problemsökning

When you troubleshoot issues with a video adapter, there are some quick tests that you can complete to rule out potential problems. You can test to make sure that the following components are working correctly and are not the source of the issue:

  • Video cables

  • Video adapter

  • Video source (such as a DVD player or computer)

  • Video destination (such as a monitor or projector)

To test your setup components, try the following:

  • Use the cable, video adapter, video source, and video destination in another setup to see if the problem is with the components or the setup.

  • Use a different cable, video adapter, video source, and video destination in your setup to see if the problem persists. Ideally, you should test a component that you know works in another setup.

When you test your cables, it is recommended that you do the following:

  • Test each cable individually.

  • Use short cables when you are testing.

When you test the video source and video destination, it is recommended that you do the following:

  • Remove the video adapter from your setup and test to make sure that the video source and video destination work together without the video adapter.

  • Test to make sure that the video source and video destination work together at the resolution that you want to use.

Note: In order for your setup to work properly, the video source, adapter, and destination all need to support the resolution that you are using.

If a DisplayPort converter with audio is not passing sound from the source to the destination, complete the following:

  1. Make sure that the DisplayPort connection on the video card is the default audio playback device.
  2. Make sure that the video card has the DisplayPort audio codec installed. If not, visit the video card manufacturer's website to find out how to update the video card driver.

Before You Buy

When you convert video from a source that uses DisplayPort or Mini DisplayPort to DVI or HDMI (for example, a computer to a monitor), you will need to consider the difference between passive and active adapters.

If the source supports dual-mode DisplayPort (also known as DP++), then you can use a passive adapter because the source can perform the conversion. If the source does not support DP++, then you need to use an active converter, which includes additional chips to perform the conversion.

Thunderbolt ports support DP++ natively. To run multiple monitors from the same computer, refer to the Active Adapters section below.

Passive Adapters

Passive adapters are less expensive since they do not need to include additional chips. A quick way to check whether you can use a passive adapter is to see if the DisplayPort or Mini DisplayPort source has the DP++ symbol above it. The symbol is a D with a P inside of it, with two + signs to the left, one on top of the other.

Active Adapters

Active adapters use additional chips to make the conversion inside the adapter, regardless of whether the source supports DP++. This means that active adapters are more expensive than passive adapters.

If you want to use multiple monitors with the same computer, you should use an active adapter because some video cards cannot run the maximum number of monitors while using DP++. This is especially true if the computer has more than one DisplayPort or Mini DisplayPort connection. Check with your video card manufacturer to confirm which type of adapter you need for the setup that you would like to run.

Note: You should use passive adapters with StarTech.com MST hubs, except when you are converting from DisplayPort to VGA, since that type of conversion requires active adapters.  For more information on using adapters with StarTech.com MST hubs, refer to the following FAQ: http://www.startech.com/faq/mst_hubs_passive_vs_active_adapters.

Surface Dock

If you experience issues when you connect passive video signal adapters to the Surface Dock, Microsoft recommends that you use active video signal converters instead. StarTech.com offers an active video signal converter for DVI monitors (MDP2DVIS) and for HDMI monitors (MDP2HD4KS).

Note: This issue does not apply to the Surface Pro 3 Docking Station.

Compliance and safety

Compliance letters

  • WEEE
    • Språk: English
  • RoHS
    • Språk: English

Safety Measures

  • If product has an exposed circuit board, do not touch the product under power.
  • If Class 1 Laser Product. Laser radiation is present when the system is open.
  • Wiring terminations should not be made with the product and/or electric lines under power.
  • Product installation and/or mounting should be completed by a certified professional as per the local safety and building code guidelines.
  • Cables (including power and charging cables) should be placed and routed to avoid creating electric, tripping or safety hazards.
* Produkters utseende och specifikationer kan komma att ändras utan förvarning.
Tillbaka till toppen