Mini DisplayPort to HDMI Adapter with USB Audio

Connect an HDMI® display to a Mini-DisplayPort® source with audio


  • USB Audio pass-through to HDMI® cable
  • Supports HDTV resolutions up to 1080p
  • Easy to use cable, no software required
Ditt pris
€92,99 EUR excl. VAT
€116,24 EUR incl. VAT

MDP2HDMIUSBA Mini DisplayPort® med USB Audio till HDMI®-adapter är en kostnadseffektiv HDMI med ljud till Mini DisplayPort-länk som låter dig ansluta en HDMI-kompatibel HDTV till en enhet med en Mini DisplayPort-utgång och slippa kostnaden för att uppgradera TV:n. Mini DisplayPort-adaptern är det perfekta tillbehöret för alla dina Microsoft® Surface™ Pro-enheter med mDP.

Anslut bara USB- och Mini DisplayPort-kontakterna till en PC eller Mac® och HDMI-kontakten till en HDMI-TV/skärm. 2-kanaligt analogt ljud passerar genom HDMI-anslutningen och ger ljud till skärmsidan med hjälp av en HDMI-kabel.

MDP2HDMIUSBA är en passiv adapter som kräver en DP++ port (DisplayPort++). Det betyder att även DVI- och HDMI-signaler kan gå igenom porten.

Kompatibel med Intel® Thunderbolt™ vid anslutning direkt till en DisplayPort över Thunderbolt™ I/O-port.

Täcks av StarTech.coms 3-årsgaranti och gratis livstidsgaranti på teknisk support.


  • The Mini DisplayPort® to HDMI® adapter allows for an easy and hassle free connection to any HDMI HDTV or display from a PC or Mac.
  • Use your DisplayPort and USB port for video and audio pass-through to one HDMI cable.
  • Deliver audio/video content from your PC or Mac to your A/V devices (HDTV or receiver) for a larger and louder viewing.

Fördelarna med

  • Mini DisplayPort® video and USB audio pass-through to one HDMI® cable allows you to take advantage of your Audio/Video devices with less clutter
  • MDP2HDMIUSBA is ideal for PCs and Mac® computers equipped with Mini DisplayPort ports


  • Ingram Micro Sweden V931138
  • UPC 065030840330


Warranty Information Warranty 3 Years
Förpackning Package Height 1,6 cm [0,6 in]
Package Length 22,0 cm [8,7 in]
Package Width 20,0 cm [7,9 in]
Fraktvikt (förpackning) 90,0 g [3,2 oz]
Hårdvara Active or Passive Adapter Passive
AV-ingång Mini DisplayPort - 1.2
Mini DisplayPort - 1.2
AV-utgång HDMI - 1.4
Audio Yes
Industristandarder DisplayPort 1.1a
HDMI 1.3b
Indikatorer 1 - LED-indikatorer Red - Power
Kontakt(er) 1 - Connector A Mini-DisplayPort (20 pin)
1 - Connector B USB Type-A (4 pin) USB 2.0
HDMI (19 pin)
Miljö Drifttemperatur 5°C to 35°C (41°F to 95°F)
Förvaringstemperatur 0°C to 70°C (32°F to 158°F)
Luftfuktighet 0~80% RH
Prestanda Audio-specifikationer HDMI - 7.1 Channel Audio
Maximum Cable Distance To Display 15,2 m [49,9 ft]
Maximal digital upplösning 1920x1200 / 1080p
Stöd för widescreen Yes
Särskilda anmärkningar/krav System- och kabelkrav DP++ port (DisplayPort ++) required on video card or video source (DVI and HDMI pass-through must be supported)
Utseende Färg Black
Kabinettyp Plastic
Kabellängd 68,2 cm [26,9 in]
Produktlängd 76,2 cm [30,0 in]
Produktbredd 5,6 cm [2,2 in]
Produkthöjd 1,0 cm [0,4 in]
Produktvikt 90,0 g [3,2 oz]
Vad det är i lådan 1 - Ingår i paketet Mini DisplayPort and USB Audio to HDMI Adapter


Prata med en rådgivare.

Vi är alltid redo att hjälpa dig med alla dina frågor.

Direktchatt (opens in new window)




Prata med en rådgivare.

Vi är alltid redo att hjälpa dig med alla dina frågor.

Direktchatt (opens in new window)

Vanliga frågor


This device is plug and play. It does not use any drivers, and does not require any setup tasks other than plugging in the source (for example, a computer) and the destination (for example, a monitor).


When you troubleshoot issues with a video adapter, there are some quick tests that you can complete to rule out potential problems. You can test to make sure that the following components are working correctly and are not the source of the issue:

  • Video cables

  • Video adapter

  • Video source (such as a DVD player or computer)

  • Video destination (such as a monitor or projector)

To test your setup components, try the following:

  • Use the cable, video adapter, video source, and video destination in another setup to see if the problem is with the components or the setup.

  • Use a different cable, video adapter, video source, and video destination in your setup to see if the problem persists. Ideally, you should test a component that you know works in another setup.

When you test your cables, it is recommended that you do the following:

  • Test each cable individually.

  • Use short cables when you are testing.

When you test the video source and video destination, it is recommended that you do the following:

  • Remove the video adapter from your setup and test to make sure that the video source and video destination work together without the video adapter.

  • Test to make sure that the video source and video destination work together at the resolution that you want to use.

Note: In order for your setup to work properly, the video source, adapter, and destination all need to support the resolution that you are using.

Try the following:

  1. Check that the monitor’s video port works with another source.
  2. Check that the cables between the source and the destination work with other equipment.
  3. Check whether the video adapter works with another source and another destination.

The error “Out of Range” normally means that the resolution being output by the computer is not compatible with the display. Try lowering the resolution to see if that helps resolve the issue.  You may need to connect another monitor or restart the computer or source to accomplish this.

If a DisplayPort converter with audio is not passing sound from the source to the destination, complete the following:

  1. Make sure that the DisplayPort connection on the video card is the default audio playback device.
  2. Make sure that the video card has the DisplayPort audio codec installed. If not, visit the video card manufacturer's website to find out how to update the video card driver.

Before You Buy

Unfortunately no, this device has an intended source and an intended destination.  Refer to the title of the webpage for this order.

When you convert video from a source that uses DisplayPort or Mini DisplayPort to DVI or HDMI (for example, a computer to a monitor), you will need to consider the difference between passive and active adapters.

If the source supports dual-mode DisplayPort (also known as DP++), then you can use a passive adapter because the source can perform the conversion. If the source does not support DP++, then you need to use an active converter, which includes additional chips to perform the conversion.

Thunderbolt ports support DP++ natively. To run multiple monitors from the same computer, refer to the Active Adapters section below.

Passive Adapters

Passive adapters are less expensive since they do not need to include additional chips. A quick way to check whether you can use a passive adapter is to see if the DisplayPort or Mini DisplayPort source has the DP++ symbol above it. The symbol is a D with a P inside of it, with two + signs to the left, one on top of the other.

Active Adapters

Active adapters use additional chips to make the conversion inside the adapter, regardless of whether the source supports DP++. This means that active adapters are more expensive than passive adapters.

If you want to use multiple monitors with the same computer, you should use an active adapter because some video cards cannot run the maximum number of monitors while using DP++. This is especially true if the computer has more than one DisplayPort or Mini DisplayPort connection. Check with your video card manufacturer to confirm which type of adapter you need for the setup that you would like to run.

Note: You should use passive adapters with MST hubs, except when you are converting from DisplayPort to VGA, since that type of conversion requires active adapters.  For more information on using adapters with MST hubs, refer to the following FAQ:

Surface Dock

If you experience issues when you connect passive video signal adapters to the Surface Dock, Microsoft recommends that you use active video signal converters instead. offers an active video signal converter for DVI monitors (MDP2DVIS) and for HDMI monitors (MDP2HD4KS).

Note: This issue does not apply to the Surface Pro 3 Docking Station.

Compliance and safety

Compliance letters

Safety Measures

  • If product has an exposed circuit board, do not touch the product under power.
  • If Class 1 Laser Product. Laser radiation is present when the system is open.
  • Wiring terminations should not be made with the product and/or electric lines under power.
  • Product installation and/or mounting should be completed by a certified professional as per the local safety and building code guidelines.
  • Cables (including power and charging cables) should be placed and routed to avoid creating electric, tripping or safety hazards.
* Produkters utseende och specifikationer kan komma att ändras utan förvarning.
Tillbaka till toppen