Mini DisplayPort till HDMI-kabeladapter - 3 m - 4K 30 Hz

Slipp stök genom att ansluta din mDP-dator direkt till en HDMI-skärm med denna kabel på 3 meter

Produkt ID: MDP2HDMM3MB

  • Enastående videokvalitet med stöd för videoupplösningar på upp till 4K vid 30 Hz
  • Minska trasslet med en kabeladapter på 3 m
  • Slipp problemen med konverterare som behöver extra kablar och strömadaptrar med hjälp av denna plug-and-play-kabeladapter
Ditt pris
€30,99 EUR excl. VAT
€38,74 EUR incl. VAT

Denna Mini DisplayPort™ till HDMI®-kabeladapter på 3 m ger en en-kabelsanslutning från din mDP-utrustade Microsoft® Surface™ Pro-, MacBook- eller Ultrabook™-bärbar dator till en HDMI-skärm eller -projektor.Den passiva adaptern stöder videoupplösningar på upp till Ultra HD 4K och är Thunderbolt™-kompatibel vid anslutning direkt till en kompatibel DisplayPort över Thunderbolt I/O-port.

Enastående bildkvalitet

Denna kabeladapter fungerar tillsammans med din 4K HDMI-skärm och videokälla så att du kan bibehålla en enastående bildkvalitet med fyra gånger högre upplösning än 1080p när du konverterar Mini DisplayPort till HDMI. 

Adaptern är dessutom bakåtkompatibel med skärmar och videokällor med lägre upplösning. Med stödet för HD-upplösningar på 1080p och 720p kan du vara säker på att din befintliga 4K video-utrustning även räcker i framtiden.

Problemfri installation

För den enklaste och diskretaste installationen ansluter denna mDP till HDMI-adapter direkt från din Mini DisplayPort-videokälla till HDMI-porten på din skärm. Den behöver inte en strömkälla till skillnad från vissa konverterardonglar som behöver aktiv ström och separata videokablar.

Trasselfri installation

Med en längd på 3 m ger denna kabeladapter en direktanslutning som eliminerar överflödig kabellängd för att garantera en städad och professionell installation. För kortare eller längre installationer har vi även en MDP2HDMM1MB, en MDP2HDMM2MB, och en MDP2HDMM5MB så att du kan välja rätt kabellängd för dina installationsbehov.

MDP2HDMM3MB täcks av StarTech.coms 3-årsgaranti och gratis livstidsgaranti på teknisk support.

Användning

  • Anslut en Mini DisplayPort-dator till en HDMI-skärm på arbetsstationen eller skrivbordet i klassrummet
  • Använd i ditt styrelserum eller på dina arbetsstationer på kontoret för installationer som kräver en kabel på 3 m
  • Installera på din arbetsstation i hemmet för att göra din DisplayPort-dator kompatibel med din HDMI-skärm
  • Anslut din mDP-videokälla till en 4K HDMI-skärm

Partnernummer

  • Ingram Micro Sweden V933764
  • ALSO Sweden 000000000002828249
  • UPC 065030865401

Specifikationer

Warranty Information Warranty 3 Years
Förpackning Fraktvikt (förpackning) 126 g [4,4 oz]
Package Length 22,4 cm [8,8 in]
Package Width 20 cm [7,9 in]
Package Height 20 mm [0,8 in]
Hårdvara Active or Passive Adapter Passiv
AV-ingång Mini DisplayPort - 1.2
AV-utgång HDMI - 1.4
Audio Ja
Industristandarder DPCP (DisplayPort Content Protection)
HDCP (High Definition Content Protection)
DisplayPort 1.2
HDMI 1.4
Kontakt(er) 1 - Connector A Mini-DisplayPort (20-stifts)
1 - Connector B HDMI (19-stifts)
Miljö Drifttemperatur 0°C to 70°C (32°F to 158°F)
Förvaringstemperatur -10°C to 70°C (14°F to 158°F)
Luftfuktighet 10%-85%
Prestanda Audio-specifikationer HDMI - 7.1 Channel Audio
Maximal digital upplösning 4K x 2K @ 30 Hz
Stödda upplösningar 4k x 2K (Ultra HD)
1920x1200
1920x1080 (1080p)
1280x720 (720p)
Stöd för widescreen Ja
Medeltid mellan fel (MTBF) 2,183,131 timmar
Utseende Produkthöjd 0 mm [0,0 in]
Produktvikt 95,5 g [3,4 oz]
Produktbredd 0 mm [0,0 in]
Färg Svart
Kabellängd 3 m [9,8 ft]
Produktlängd 3,0 m [9,9 ft]
Vad det är i lådan 1 - Ingår i paketet mDP till HDMI-kabel

Drivers/Downloads

Prata med en rådgivare.

Vi är alltid redo att hjälpa dig med alla dina frågor.

Direktchatt (opens in new window)

Diagram:

Datasheet

Produktsupport

Prata med en rådgivare.

Vi är alltid redo att hjälpa dig med alla dina frågor.

Direktchatt (opens in new window)

Vanliga frågor

Installation

This device is plug and play. It does not use any drivers, and does not require any setup tasks other than plugging in the source (for example, a computer) and the destination (for example, a monitor).

Problemsökning

When you troubleshoot issues with a video adapter, there are some quick tests that you can complete to rule out potential problems. You can test to make sure that the following components are working correctly and are not the source of the issue:

  • Video cables

  • Video adapter

  • Video source (such as a DVD player or computer)

  • Video destination (such as a monitor or projector)

To test your setup components, try the following:

  • Use the cable, video adapter, video source, and video destination in another setup to see if the problem is with the components or the setup.

  • Use a different cable, video adapter, video source, and video destination in your setup to see if the problem persists. Ideally, you should test a component that you know works in another setup.

When you test your cables, it is recommended that you do the following:

  • Test each cable individually.

  • Use short cables when you are testing.

When you test the video source and video destination, it is recommended that you do the following:

  • Remove the video adapter from your setup and test to make sure that the video source and video destination work together without the video adapter.

  • Test to make sure that the video source and video destination work together at the resolution that you want to use.

Note: In order for your setup to work properly, the video source, adapter, and destination all need to support the resolution that you are using.

Try the following:

  1. Check that the monitor’s video port works with another source.
  2. Check that the cables between the source and the destination work with other equipment.
  3. Check whether the video adapter works with another source and another destination.

The error “Out of Range” normally means that the resolution being output by the computer is not compatible with the display. Try lowering the resolution to see if that helps resolve the issue.  You may need to connect another monitor or restart the computer or source to accomplish this.

If a DisplayPort converter with audio is not passing sound from the source to the destination, complete the following:

  1. Make sure that the DisplayPort connection on the video card is the default audio playback device.
  2. Make sure that the video card has the DisplayPort audio codec installed. If not, visit the video card manufacturer's website to find out how to update the video card driver.

Before You Buy

When you convert video from a source that uses DisplayPort or Mini DisplayPort to DVI or HDMI (for example, a computer to a monitor), you will need to consider the difference between passive and active adapters.

If the source supports dual-mode DisplayPort (also known as DP++), then you can use a passive adapter because the source can perform the conversion. If the source does not support DP++, then you need to use an active converter, which includes additional chips to perform the conversion.

Thunderbolt ports support DP++ natively. To run multiple monitors from the same computer, refer to the Active Adapters section below.

Passive Adapters

Passive adapters are less expensive since they do not need to include additional chips. A quick way to check whether you can use a passive adapter is to see if the DisplayPort or Mini DisplayPort source has the DP++ symbol above it. The symbol is a D with a P inside of it, with two + signs to the left, one on top of the other.

Active Adapters

Active adapters use additional chips to make the conversion inside the adapter, regardless of whether the source supports DP++. This means that active adapters are more expensive than passive adapters.

If you want to use multiple monitors with the same computer, you should use an active adapter because some video cards cannot run the maximum number of monitors while using DP++. This is especially true if the computer has more than one DisplayPort or Mini DisplayPort connection. Check with your video card manufacturer to confirm which type of adapter you need for the setup that you would like to run.

Note: You should use passive adapters with StarTech.com MST hubs, except when you are converting from DisplayPort to VGA, since that type of conversion requires active adapters.  For more information on using adapters with StarTech.com MST hubs, refer to the following FAQ: http://www.startech.com/faq/mst_hubs_passive_vs_active_adapters.

Surface Dock

If you experience issues when you connect passive video signal adapters to the Surface Dock, Microsoft recommends that you use active video signal converters instead. StarTech.com offers an active video signal converter for DVI monitors (MDP2DVIS) and for HDMI monitors (MDP2HD4KS).

Note: This issue does not apply to the Surface Pro 3 Docking Station.

Compliance and safety

Compliance letters

Safety Measures

  • If product has an exposed circuit board, do not touch the product under power.
  • If Class 1 Laser Product. Laser radiation is present when the system is open.
  • Wiring terminations should not be made with the product and/or electric lines under power.
  • Product installation and/or mounting should be completed by a certified professional as per the local safety and building code guidelines.
  • Cables (including power and charging cables) should be placed and routed to avoid creating electric, tripping or safety hazards.
* Produkters utseende och specifikationer kan komma att ändras utan förvarning.
Tillbaka till toppen
Vänta...