1,8 m Mini DisplayPort till VGA-kabel – M/M

Anslut din VGA-skärm till en Mini DisplayPort-kompatibel dator med en enda kabel

Produkt ID: MDP2VGAMM6

  • Allt-i-1-kabeldesign
  • Stödjer upplösningar upp till 1920x1200 och HDTV-upplösningar upp till 1080p
  • Ingen programvara eller extra drivrutiner behövs
Ditt pris
€46,99 EUR excl. VAT
€58,74 EUR incl. VAT

MDP2VGAMM6 1,8 m lång Mini DisplayPort till VGA-kabeln är en kostnadseffektiv Mini DisplayPort till VGA-länk som gör att du kan ansluta en VGA-skärm till en PC eller Mac® med ett Mini DisplayPort-uttag - och du slipper kostnaden för att uppgradera till en kompatibel skärm. Adaptern är det perfekta tillbehöret för alla dina Microsoft® Surface™ Pro- och MacBook®-enheter som stöder mDP.

Denna lättanvända allt-i-ett Mini DisplayPort-/VGA-kabel behöver inga extra konverterare eller adaptrar och inga drivrutiner eller program krävs för installationen.

Kompatibel med Intel® Thunderbolt™ vid anslutning direkt till en DisplayPort över Thunderbolt™ I/O-port.

Täcks av StarTech.coms 3-årsgaranti.

Användning

  • Behåll din nuvarande VGA-skärm och använd Mini DisplayPort till VGA-videokonverterarkablar
  • Använd en VGA-skärm till en DisplayPort-kompatibel MacBook® eller iMac®, med hjälp av Mini DisplayPort-videouttaget

Fördelarna med StarTech.com

  • Allt-i-ett-kabeldesign som är lätt att använda och hantera.
  • Upplösningsstöd upp till 1920x1200 och HDTV-upplösning upp till 1080p ger optimal tittarupplevelse
  • Inga programvaror eller extra drivrutiner behövs vilket gör det lätt och smidigt att koppla in din VGA-skärm

Partnernummer

  • Ingram Micro Sweden V931186
  • UPC 065030840286

Specifikationer

Warranty Information Warranty 3 Years
Förpackning Package Height 20 mm [0,8 in]
Package Length 22 cm [8,7 in]
Fraktvikt (förpackning) 0,1 kg [0,2 lb]
Package Width 20 cm [7,9 in]
Hårdvara Active or Passive Adapter Aktiv
AV-ingång Mini DisplayPort - 1.2
AV-utgång VGA
Audio Nej
Kontakt(er) Connector A 1 - Mini-DisplayPort (20-stifts)
Connector B 1 - VGA (15-stifts, High Density D-Sub)
Miljö Drifttemperatur 5°C to 35°C (41°F to 95°F)
Förvaringstemperatur 0°C to 70°C (32°F to 158°F)
Luftfuktighet 20~80% RH
Prestanda Audio-specifikationer VGA - No Audio Support
Maximal kabellängd 1828.8
Maximal analog upplösning 1920x1200 / 1080p
Utseende Produkthöjd 0 cm [0,0 in]
Produktvikt 77 g [2,7 oz]
Produktbredd 0 mm [0,0 in]
Färg Svart
Kabellängd 1828,8 mm [72,0 in]
Produktlängd 182,9 cm [72,0 in]
Vad det är i lådan Ingår i paketet 1 - 1,8 m Mini DisplayPort till VGA-kabel – M/M

Drivers/Downloads

Prata med en rådgivare.

Vi är alltid redo att hjälpa dig med alla dina frågor.

Direktchatt (opens in new window)

Datasheet

Produktsupport

Prata med en rådgivare.

Vi är alltid redo att hjälpa dig med alla dina frågor.

Direktchatt (opens in new window)

Vanliga frågor

Problemsökning

When you troubleshoot issues with a video adapter, there are some quick tests that you can complete to rule out potential problems. You can test to make sure that the following components are working correctly and are not the source of the issue:

  • Video cables

  • Video adapter

  • Video source (such as a DVD player or computer)

  • Video destination (such as a monitor or projector)

To test your setup components, try the following:

  • Use the cable, video adapter, video source, and video destination in another setup to see if the problem is with the components or the setup.

  • Use a different cable, video adapter, video source, and video destination in your setup to see if the problem persists. Ideally, you should test a component that you know works in another setup.

When you test your cables, it is recommended that you do the following:

  • Test each cable individually.

  • Use short cables when you are testing.

When you test the video source and video destination, it is recommended that you do the following:

  • Remove the video adapter from your setup and test to make sure that the video source and video destination work together without the video adapter.

  • Test to make sure that the video source and video destination work together at the resolution that you want to use.

Note: In order for your setup to work properly, the video source, adapter, and destination all need to support the resolution that you are using.

Try the following:

  1. Check that the monitor’s video port works with another source.
  2. Check that the cables between the source and the destination work with other equipment.
  3. Check whether the video adapter works with another source and another destination.

This is likely a High-bandwidth Digital Content Protection (HDCP) issue. If you are converting a video signal from a device that can play copyright-protected content, HDCP will block the conversion to an analog signal (for example, VGA) or to any video capture cards.

You will likely run into this issue when you use devices like Blu-ray players, DVD players, and certain gaming consoles. For more information on HDCP and gaming consoles, refer to the following FAQ: https://www.startech.com/faq/video_capture_cards_video_game_console_compatibility.

Some video cards also output an HDCP signal full time. In this case there should be an option for your video card to disable this feature. You might need to contact the manufacturer of your video card for more information.

Adhering to HDCP is required for converting all digital signals to analog signals or to video capture cards. Unfortunately, there is nothing you can do in these situations other than convert to a digital display.

The error “Out of Range” normally means that the resolution being output by the computer is not compatible with the display. Try lowering the resolution to see if that helps resolve the issue.  You may need to connect another monitor or restart the computer or source to accomplish this.

Installation

This device is plug and play. It does not use any drivers, and does not require any setup tasks other than plugging in the source (for example, a computer) and the destination (for example, a monitor).

Compliance and safety

Compliance letters

Safety Measures

  • If product has an exposed circuit board, do not touch the product under power.
  • If Class 1 Laser Product. Laser radiation is present when the system is open.
  • Wiring terminations should not be made with the product and/or electric lines under power.
  • Product installation and/or mounting should be completed by a certified professional as per the local safety and building code guidelines.
  • Cables (including power and charging cables) should be placed and routed to avoid creating electric, tripping or safety hazards.
* Produkters utseende och specifikationer kan komma att ändras utan förvarning.
Tillbaka till toppen