Mini DisplayPort till VGA-videoadapter – Vit

Anslut en VGA-skärm till en PC eller Mac® med mini DisplayPort®

Produkt ID: MDP2VGAW

  • Stödjer PC-bildupplösningar på upp till 1920 x 1200 och bildupplösning på HDTV är upp till 1080p
  • Adaptern är enkel att använda och kräver ingen programvara
  • Kompatibel med Intel® Thunderbolt™
Ditt pris
€26,99 EUR excl. VAT
€33,74 EUR incl. VAT

Med denna Mini DisplayPort till VGA-adapter kan du ansluta din mDP-dator till en VGA-skärm eller -projektor. Adaptern fungerar med Mini DisplayPort-datorer som Macbook® och alla Microsoft® Surface™ Pro-enheter med mDP.

Anslut din Mini DisplayPort-dator till en VGA-skärm enkelt

Med mDP till VGA-adaptern kan du ansluta din bärbara eller stationära dator eller surfplatta med Mini DisplayPort till en VGA-skärm. Adaptern är kompatibel med mDP-portar samt Thunderbolt 1 och Thunderbolt 2 I/O-portar och stöder plug-and-play-anslutning för problemfri setup.

Fungerar med äldre VGA-skärmar

Mini DisplayPort-adaptern gör din mDP-dator helt kompatibel med befintliga VGA-skärmar eller -projektorer i hemmet eller på kontoret. VGA-kontakten har muttrar som passar skruvarna på standard VGA-kablar för att se till att din videokabel inte lossnar.

Den perfekta resepartnern för din MacBook med Mini DisplayPort

Med sin helvita design är denna Mini DisplayPort-videoadapter det perfekta resetillbehöret för din MacBook med mDP. Adaptern är kompakt och lätt så den får enkelt plats i MacBook-väskan eller annan väska, vilket är perfekt för BYOD-situationer (Bring Your Own Device) på kontoret. Förutom att adaptern ser fantastisk ut bredvid din Mac fungerar den även med alla Mini DisplayPort-datorer, som till exempel din bärbara Windows®-dator.

Kristallklar bildkvalitet

Med sitt stöd för videoupplösningar på upp till 1920x1200 eller 1080p kommer du förvånas över bildkvaliteten som adaptern ger, även när den är ansluten till en äldre VGA-skärm, projektor eller TV. Adaptern utnyttjar videoförmågorna som är inbyggda i din mDP-anslutning för att ge alla detaljer i fantastisk upplösning.

MDP2VGAW täcks av StarTech.coms 3-årsgaranti och gratis livstidsgaranti på teknisk support.

Användning

  • Den är perfekt för digitala underhållningscentra, hemmakontor, konferensrum för företag och visningar på mässor
  • Behåll din befintliga VGA-skärm och använd den med din nya mini DisplayPort-enhet
  • VGA-bildskärmen är perfekt för att användas som en andra bildskärm

Fördelarna med StarTech.com

  • Lättanvänd konverterare med liten formfaktor gör Mini DisplayPort:en bakåtkompatibel med din befintliga VGA-skärm eller projektor
  • Enkel plug-and-play-lösning som inte kräver installation av program eller drivrutiner

Partnernummer

  • Ingram Micro Sweden V931874
  • ALSO Sweden 000000000002763739
  • UPC 065030845977

Specifikationer

Warranty Information Warranty 3 Years
Förpackning Fraktvikt (förpackning) 42 g [1,5 oz]
Package Length 22 cm [8,7 in]
Package Width 20 cm [7,9 in]
Package Height 15 mm [0,6 in]
Hårdvara Active or Passive Adapter Aktiv
AV-ingång Mini DisplayPort - 1.2
Adapterstil Adaptrar
AV-utgång VGA
Audio Nej
Industristandarder DisplayPort 1.1a
Kontakt(er) 1 - Connector A Mini-DisplayPort (20-stifts)
1 - Connector B VGA (15-stifts, High Density D-Sub)
Miljö Drifttemperatur 0°C to 60°C (32°F to 140°F)
Förvaringstemperatur -10°C to 70°C (14°F to 158°F)
Luftfuktighet 40~85 % RH
Prestanda Audio-specifikationer VGA - No Audio Support
Maximal analog upplösning 1920x1200
Medeltid mellan fel (MTBF) 1,340,629 timmar
Utseende Produktvikt 0 g [0,0 oz]
Färg Vit
Kabinettyp Av plast
Kabellängd 12 cm [4,7 in]
Produktlängd 18 cm [7,1 in]
Produktbredd 45 mm [1,8 in]
Produkthöjd 15 mm [0,6 in]
Vad det är i lådan 1 - Ingår i paketet Mini DisplayPort® till VGA-videoadapter

Tillbehör

MXT101MMHQ1

1 ft Coax High Resolution Monitor VGA Video Cable - HD15 to HD15 M/M

Connect your VGA monitor with the highest quality connection available

Ditt pris
€6,99 EUR excl. VAT
€8,74 EUR incl. VAT
MXT101MMHQ3

3 ft Coax High Resolution Monitor VGA Cable - HD15 M/M

Connect your VGA monitor with the highest quality connection available

Ditt pris
€6,99 EUR excl. VAT
€8,74 EUR incl. VAT
MXT101MMHQ

1,8 m koaxialvideokabel för VGA-skärm med hög upplösning - HD15 till HD15 M/M

Anslut din VGA-skärm med anslutning av högsta tillgängliga kvalitet.

Ditt pris
€8,99 EUR excl. VAT
€11,24 EUR incl. VAT
MXT101MMHQ10

10 ft Coax High Resolution VGA Monitor Cable HD15 M/M

Connect your VGA monitor with the highest quality connection available

Ditt pris
€12,99 EUR excl. VAT
€16,24 EUR incl. VAT
MXT101MMHQ20

6 m koaxialkabel för VGA-skärm med hög upplösning, HD15 M/M

Anslut din VGA-skärm med anslutning av högsta tillgängliga kvalitet.

Ditt pris
€21,99 EUR excl. VAT
€27,49 EUR incl. VAT
MXT101MMHQ25

7,6 m koaxialkabel för VGA-skärm med hög upplösning, HD15 M/M

Anslut din VGA-skärm med anslutning av högsta tillgängliga kvalitet.

Ditt pris
€21,99 EUR excl. VAT
€27,49 EUR incl. VAT
MXT101MMHQ30

30 ft Coax High Resolution Monitor VGA Cable - HD15 M/M

Connect your VGA monitor with the highest quality connection available

Ditt pris
€24,99 EUR excl. VAT
€31,24 EUR incl. VAT

Drivers/Downloads

Prata med en rådgivare.

Vi är alltid redo att hjälpa dig med alla dina frågor.

Direktchatt (opens in new window)

Datasheet

Produktsupport

Prata med en rådgivare.

Vi är alltid redo att hjälpa dig med alla dina frågor.

Direktchatt (opens in new window)

Vanliga frågor

Installation

This device is plug and play. It does not use any drivers, and does not require any setup tasks other than plugging in the source (for example, a computer) and the destination (for example, a monitor).

Problemsökning

When you troubleshoot issues with a video adapter, there are some quick tests that you can complete to rule out potential problems. You can test to make sure that the following components are working correctly and are not the source of the issue:

  • Video cables

  • Video adapter

  • Video source (such as a DVD player or computer)

  • Video destination (such as a monitor or projector)

To test your setup components, try the following:

  • Use the cable, video adapter, video source, and video destination in another setup to see if the problem is with the components or the setup.

  • Use a different cable, video adapter, video source, and video destination in your setup to see if the problem persists. Ideally, you should test a component that you know works in another setup.

When you test your cables, it is recommended that you do the following:

  • Test each cable individually.

  • Use short cables when you are testing.

When you test the video source and video destination, it is recommended that you do the following:

  • Remove the video adapter from your setup and test to make sure that the video source and video destination work together without the video adapter.

  • Test to make sure that the video source and video destination work together at the resolution that you want to use.

Note: In order for your setup to work properly, the video source, adapter, and destination all need to support the resolution that you are using.

Try the following:

  1. Check that the monitor’s video port works with another source.
  2. Check that the cables between the source and the destination work with other equipment.
  3. Check whether the video adapter works with another source and another destination.

The error “Out of Range” normally means that the resolution being output by the computer is not compatible with the display. Try lowering the resolution to see if that helps resolve the issue.  You may need to connect another monitor or restart the computer or source to accomplish this.

This is likely a High-bandwidth Digital Content Protection (HDCP) issue. If you are converting a video signal from a device that can play copyright-protected content, HDCP will block the conversion to an analog signal (for example, VGA) or to any video capture cards.

You will likely run into this issue when you use devices like Blu-ray players, DVD players, and certain gaming consoles. For more information on HDCP and gaming consoles, refer to the following FAQ: https://www.startech.com/faq/video_capture_cards_video_game_console_compatibility.

Some video cards also output an HDCP signal full time. In this case there should be an option for your video card to disable this feature. You might need to contact the manufacturer of your video card for more information.

Adhering to HDCP is required for converting all digital signals to analog signals or to video capture cards. Unfortunately, there is nothing you can do in these situations other than convert to a digital display.

Before You Buy

Unfortunately no, this device has an intended source and an intended destination.  Refer to the title of the webpage for this order.

The DisplayPort to VGA adapter only converts from DisplayPort to VGA, which means that the DisplayPort connection must be the source and the VGA connection must be the destination.

Note: DisplayPort to VGA adapters are active, and can be used with any version of DisplayPort.

When you convert video from a source that uses DisplayPort or Mini DisplayPort to DVI or HDMI (for example, a computer to a monitor), you will need to consider the difference between passive and active adapters.

If the source supports dual-mode DisplayPort (also known as DP++), then you can use a passive adapter because the source can perform the conversion. If the source does not support DP++, then you need to use an active converter, which includes additional chips to perform the conversion.

Thunderbolt ports support DP++ natively. To run multiple monitors from the same computer, refer to the Active Adapters section below.

Passive Adapters

Passive adapters are less expensive since they do not need to include additional chips. A quick way to check whether you can use a passive adapter is to see if the DisplayPort or Mini DisplayPort source has the DP++ symbol above it. The symbol is a D with a P inside of it, with two + signs to the left, one on top of the other.

Active Adapters

Active adapters use additional chips to make the conversion inside the adapter, regardless of whether the source supports DP++. This means that active adapters are more expensive than passive adapters.

If you want to use multiple monitors with the same computer, you should use an active adapter because some video cards cannot run the maximum number of monitors while using DP++. This is especially true if the computer has more than one DisplayPort or Mini DisplayPort connection. Check with your video card manufacturer to confirm which type of adapter you need for the setup that you would like to run.

Note: You should use passive adapters with StarTech.com MST hubs, except when you are converting from DisplayPort to VGA, since that type of conversion requires active adapters.  For more information on using adapters with StarTech.com MST hubs, refer to the following FAQ: http://www.startech.com/faq/mst_hubs_passive_vs_active_adapters.

Surface Dock

If you experience issues when you connect passive video signal adapters to the Surface Dock, Microsoft recommends that you use active video signal converters instead. StarTech.com offers an active video signal converter for DVI monitors (MDP2DVIS) and for HDMI monitors (MDP2HD4KS).

Note: This issue does not apply to the Surface Pro 3 Docking Station.

Compliance and safety

Compliance letters

  • RoHS
    • Språk: English
  • WEEE
    • Språk: English

Safety Measures

  • If product has an exposed circuit board, do not touch the product under power.
  • If Class 1 Laser Product. Laser radiation is present when the system is open.
  • Wiring terminations should not be made with the product and/or electric lines under power.
  • Product installation and/or mounting should be completed by a certified professional as per the local safety and building code guidelines.
  • Cables (including power and charging cables) should be placed and routed to avoid creating electric, tripping or safety hazards.
* Produkters utseende och specifikationer kan komma att ändras utan förvarning.
Tillbaka till toppen