Produkt ID: DVIDDMMBA6
The DVIDDMMBA6 6ft Dual Link DVI-D cable features a standard DVI-D dual link connector as well as a DVI-D dual link connector that is situated on an downward angle relative to the shaft of the cable, requiring only 40mm of space at the connection point.
The perfect solution for making digital video connections in tight spaces, the design of the downward angle cable connector helps prevent damage to the cable and ensures long-lasting performance by eliminating the need to bend or strain the cable to account for a lack of space.
The 6ft DVI-D digital monitor cable supports resolutions of up to 2560x1600 and transmission rates of up to 9.9 Gbits/sec, and is fully compliant with DVI DDWG standards.
Designed and constructed for maximum durability, this high quality digital video cable is backed by StarTech.com's Lifetime Warranty.
|Förpackning||Package Height||41 mm [1,6 in]|
|Package Length||22 cm [8,7 in]|
|Fraktvikt (förpackning)||0,2 kg [0,5 lb]|
|Package Width||20 cm [7,9 in]|
|Hårdvara||Kabelmanteltyp||PVC - Polyvinyl Chloride|
|Industristandarder||DVI DDWG Standard|
|Kontakt(er)||Connector A||1 - DVI-D (25-stifts)|
|Connector B||1 - DVI-D (25-stifts)|
|Utseende||Produkthöjd||0 cm [0,0 in]|
|Produktvikt||218 g [7,7 oz]|
|Produktbredd||0 mm [0,0 in]|
|Kabellängd||1828 mm [72,0 in]|
|Produktlängd||182,8 cm [72,0 in]|
|Vad det är i lådan||Ingår i paketet||1 - 6ft Down Angled DVI-D Dual Link Digital Monitor Cable|
Extend the connection distance between your DVI-D digital devices by 15ft
Koppla ihop två DVI-I-kablar för att göra en längre kabel
When you troubleshoot issues with a DVI cable, there are some quick tests that you can complete to rule out potential problems. You can test to make sure that the following components are working correctly and are not the source of the issue:
To test your setup components, try the following:
Use the DVI cable, video source, and video destination in another setup to see if the problem is with the components or the setup.
Use a different DVI cable, video source, and video destination in your setup to see if the problem persists. Ideally, you should test a component that you know works in another setup.
When you test the video cables, video source, and video destination, it is recommended that you do the following:
Make sure that you are using the correct type of DVI cable. For more information about DVI cables, see the following FAQ: http://www.startech.com/faq/video_signal_converters_dvi_interface.
Verify that the source resolution matches the video source destination capabilities. For example, if the destination or DVI cable is only capable of 1920 x 1080, then the source cannot output 2560 x 1600, as that exceeds the capabilities of the destination or DVI cable.
Test your setup components using a lower resolution or a lower refresh rate, for example, 1024 x 768.
Note: Single Link DVI cables are only capable of resolutions up to 1920 x 1080. In order to obtain a resolution of 2560 x 1600, you will need to use a Dual Link DVI cable. For more information, see the FAQ link listed above.