Produkt ID: HB30C5A2CST
Med den här USB-C™-hubben förvandlar du din bärbara eller stationära dators USB Type-C™-port till fyra vanliga USB-A-portar - en USB-A snabbladdningsport och två USB-C-portar. Hubb för anslutning av flera USB-enheter
7-portarshubben är alltid praktisk att ha till hands, monterad på väggen eller direkt på skrivbordet. Hubbens portar är placerade på stort avstånd från varandra för enkel isättning och borttagning av USB-enheter utan att andra enheter behöver tas bort för att få plats.
Med extra USB 3.0-portar kan du öka produktiviteten och ansluta fler enheter till datorn eller helt enkelt slippa byta enheter anslutna till din portbegränsade bärbara dator. Med hubben förlänger du livet på dina USB 3.0-enheter samtidigt som du drar fördel av nyare USB-C-enheter.
Som gjord för IT-proffs och alla som ständigt behöver koppla i och koppla ur olika enheter.
Hubben är det perfekta tillbehöret för bärbara eller stationära datorer och har ett robust metallhölje för att hänga med i den dagliga ruljansen.
Montera med den medföljande vägghållaren där det passar dig bäst - på väggen eller på skrivbordet.
I snabbladdningsportarna ansluter du dina mobila enheter för att dom alltid ska vara laddade och klara. Synkronisera och får lätt åtkomst till dina enheter medan du laddar. Ladda din mobila enhet snabbare än med vanliga USB-portar tack vare USB-A-porten som stöder USB Battery Charging Specification 1.2 och ger upp till 2,4A.
HB30C5A2CST täcks av StarTech.coms 2-årsgaranti och gratis livstidsgaranti på teknisk support.
Warranty Information | Warranty | 2 Years |
---|---|---|
Förpackning | Fraktvikt (förpackning) | 650,0 g [22,9 oz] |
Package Length | 19,0 cm [7,5 in] | |
Package Width | 98,0 mm [3,9 in] | |
Package Height | 95,0 mm [3,7 in] | |
Hårdvara | USB-C-enhetsport(ar) | Ja |
USB-C-värdanslutning | Ja | |
Snabbladdningsport(ar) | Ja | |
Portar | 7 | |
Gränssnitt | USB 3.0 | |
Busstyp | USB 3.0 | |
Industristandarder | USB Battery Charging Specification Rev. 1.2 USB-A laddningsport som levererar upp till 2,4A USB 3.0 - bakåtkompatibel med USB 2.0 och 1.1 |
|
Chipset-ID | Realtek - RTS5411 | |
Indikatorer | 1 - LED-indikatorer | Ström |
7 - LED-indikatorer | Anslutning via hubbport | |
Kontakt(er) | 1 - Connector A | USB Type-B (9-stifts) USB 3.0 |
4 - Connector B | USB Type-A (9-stifts) USB 3.0 (5 Gbps) | |
2 - Connector B | USB Type-C (24-stifts) USB 3.0 (5Gbps) | |
1 - Connector B | USB 3.0 A (Snabbladdning, 9-stifts) | |
Miljö | Drifttemperatur | 5°C to 35°C (41°F to 95°F) |
Förvaringstemperatur | -20°C to 50°C (-4°F to 122°F) | |
Luftfuktighet | 20~80% RH | |
Mjukvara | OS-kompatibilitet | OS-oberoende; ingen mjukvara eller drivrutin behövs |
Prestanda | Maximal dataöverföringshastighet | 5 Gbps |
Typ och hastighet | USB 3.0 - 5 Gbit/s | |
Ström | Power Source | AC-adapter medföljer |
Inspänning | 100 - 240 AC | |
Inström | 1.5 A | |
Utspänning | 12V DC | |
Utström | 3 A | |
Polaritet på mittpol | Positiv | |
Kontakttyp | M | |
Strömförbrukning | 36 | |
Särskilda anmärkningar/krav | System- och kabelkrav | Ledig USB Type-C-port - USB 3.0 (5 Gbps) |
Obs. | USB Type C-porten är endast avsedd för data. USB 3.0 är även känt som USB 3.1 Gen 1; denna anslutningsstandard ger hastigheter på upp till 5 Gbps. Hubben stöder inte DP Alt Mode eller USB Power Delivery. |
|
Utseende | Formfaktor | Skrivbord |
Färg | Svart | |
Kabinettyp | Aluminium | |
Kabellängd | 1,0 m [3,4 ft] | |
Produktlängd | 13,0 cm [5,1 in] | |
Produktbredd | 60,0 mm [2,4 in] | |
Produkthöjd | 26,0 mm [1,0 in] | |
Produktvikt | 170,0 g [6,0 oz] | |
Vad det är i lådan | 1 - Ingår i paketet | USB-C-hubb |
universell strömadapter (NA/JP, UK, EU, ANZ) | ||
USB-C till USB-B-kabel | ||
2 - Ingår i paketet | Gummifötter | |
Monteringsfästen | ||
4 - Ingår i paketet | monteringsskruvar | |
1 - Ingår i paketet | snabbstartsguide |
Anslut USB 3.0 USB-A-enheter till en USB-hubb eller till din dator
Anslut USB 3.0 USB-B-enheter till din USB Type-C- eller Thunderbolt 3-dator
Ladda, synka och strömförse dina USB Type-C-enheter
Anslut dina USB Typ-C-enheter till din dator
Vi är alltid redo att hjälpa dig med alla dina frågor.
Direktchatt (opens in new window)Vi är alltid redo att hjälpa dig med alla dina frågor.
Direktchatt (opens in new window)When you troubleshoot issues with a USB hub, there are some quick tests that you can complete to rule out potential problems. You can test to make sure that the following components are working correctly and are not the source of the issue:
USB A-to-B cable
Computer USB port
USB peripheral(s)
To test your setup components, try the following:
Use the USB cable and USB peripheral(s) in another setup to see if the problem is with the components or the setup.
Use a different USB cable, USB port, and USB peripheral in your setup to see if the problem persists. Ideally, you should test a component that you know works in another setup.
When you test your cables, it is recommended that you do the following:
Test each cable individually.
Use short cables when you are testing.
When you test the hub, make sure that you do the following:
If a power adapter is included, provide power to the USB hub.
Attach a USB peripheral. The USB hub will not appear in any hardware listings on your system, but USB devices do appear when they are connected.
Install the drivers for the USB peripheral.
Install the latest drivers for the USB controller and motherboard chipset.
Note: No drivers or software are required for the USB hub to work with your operating system. The USB hub works independently of software and works with any operating system.
When testing your USB peripherals, make sure that you do the following:
If required, attach external power.
Confirm that the peripheral works on a standard USB port.
If the USB peripheral(s) can be detected on a standard USB port and not on the hub, do the following:
Use a new USB A-to-B cable.
Test your setup using basic USB peripherals, such as a keyboard or mouse.
Test using another USB port.
It is possible to use some USB hubs without a power supply, however, doing so may prevent certain high-power USB peripherals from operating.
When a power adapter is not used on a hub that comes with a power adapter, power is drawn from the USB port on the computer and then divided between the ports on the hub. This reduces the power delivery to individual ports and high-powered USB peripherals, such as external hard drives, may not start.
On USB hubs that can use a power adapter, more power can be supplied to USB ports than what is possible with a single USB port.
If your USB peripherals require power adapters, they probably do not require power from the USB port and can be used on a USB hub without a power adapter. With USB peripherals that use power adapters, the USB ports on the hub are only used for data transfer and do not draw power from the hub.
USB peripherals that require low power (for example, keyboards and mice) can be used on hubs without a power adapter, in conjunction with other low-power USB peripherals. In this case, power is drawn from the computer's USB port, as described above.
USB-C is a type of USB connector that is capable of supporting the following:
If using Thunderbolt 3 over USB-C, the connection is capable of additional features. For example, Thunderbolt 3 is capable of 40Gbps of total bandwidth. For more information, refer to the following FAQ: https://www.startech.com/faq/thunderbolt-3-port-capabilities.
Not all USB-C ports or devices are capable of supporting all of the features listed above, or all of the features at the maximum capabilities. If you require a specific USB-C feature, your USB host connection, cables, and device must all support the feature that you require. For more information about whether your components support specific USB-C features, refer to the information provided by the manufacturers.