Mini Thunderbolt 3-dockningsstation med dubbla 4K-skärmar och DisplayPort ‒ Mac- och Windows-dockningsstation ‒ utgått, begränsad lagerhållning, ersatt av TB3DKM2DPL (TB3DKM2DP)

Dockningsstation för bärbar dator | Mac och Windows® | Bussdriven | 1x USB-A

Produkt ID: TB3DKM2DP

  • ERSATT AV TB3DKM2DPL: Ny version som erbjuder samma funktionalitet. Dessutom ger den extra långa inbyggda kabeln på 28 cm utökad räckvidd för att minska port-/kontaktbelastningen på stativen för MacBook-datorer och bärbara datorer
  • Anslut två UHD 4K DisplayPort-skärmar vid 60 Hz eller en enskild 5K-skärm vid 60 Hz med den här bärbara Thunderbolt 3-dockningsstationen
  • STÖD FÖR DUBBLA 4K 60 HZ DP: Den här Mini Thunderbolt 3-dockningsstationen stöder genomströmning på 40 Gbps med 4K-upplösning vid 60 Hz på två DP-skärmar (upp till 4 096 x 2 160 P) via en enda TB3-port
Ditt pris
€198,99 EUR excl. VAT
€248,74 EUR incl. VAT

Thunderbolt 3-dockningsstationen får sin ström via en buss och kan ansluta till dubbla 4K DisplayPort-skärmar, Gigabit Ethernet och en USB 3.0-port (Type-A). Det är det ideala tillbehöret till din bärbara dator med Thunderbolt 3 och är kompatibelt med macOS och Windows®. För en flexibel installation har den medföljande USB-C-kabeln förlängts till 20 cm.

Skapa en dubbel 4K 60 Hz arbetsstation

Denna bärbara och dubbla DisplayPort-dockningsstationen är perfekt för redigering av 4K-video eller andra Ultra HD-uppgifter, och den stödjer 40 Gbit/s genomströmning med 4K-upplösning vid 60 Hz på två DisplayPort-skärmar via en enda Thunderbolt 3-port.

Anslut din bärbara dator till:

  • 2x 4K DisplayPort-skärmar (upp till 4096 x 2160 upplösning vid 60 Hz)

          ELLER

  • 1x 5K-skärm (5120 × 2880 upplösning vid 60 Hz)

Enkel installation och distribution 

Anslut bara Thunderbolt 3-dockningsstationen till din bärbara dator med hjälp av den medföljande Thunderbolt 3-kabeln och börja arbeta direkt. Inga tidskrävande installationer av drivrutiner behövs.

De portar du mest behöver

Gigabit Ethernet-porten (med stöd för PXE-start och Wake-on-LAN) säkerställer tillförlitlig trådbunden nätverksåtkomst för att förbättra din produktivitet. En USB 3.0 Type-A-port, med gott om utrymme runt omkring, gör att du kan ansluta en USB-enhet, som ett flashminne, för enkel filåtkomst. 

TB3DKM2DP är Thunderbolt-certifierad och omfattas av StarTech.coms 3-årsgaranti och gratis livstidsgaranti på teknisk support.

Användning

  • Granska/redigera bilder eller mediafiler på två 4K DisplayPort-skärmar
  • Idealisk storlek för delade eller tillfälliga arbetsmiljöer, som hot desks (hoteling)
  • Idealiskt för delade eller tillfälliga arbetsstationer, till exempel hot desks (hoteling)

Partnernummer

  • Ingram Micro Sweden V934351
  • ALSO Sweden 000000000003039021
  • UPC 065030872904

Kompatibilitet

  • Windows 10 logo
  • Windows 8 logo
  • Windows 7 logo
  • macOS High Sierra (10.13) logo
  • macOS Sierra (10.12) logo
  • macOS Mojave (10.14) logo
  • macOS Catalina (10.15) logo
  • macOS Big Sur (11.0) logo
Windows® 7, 8, 8.1, 10
macOS 10.12 - 10.15

Specifikationer

Warranty Information Warranty 3 Years
Förpackning Fraktvikt (förpackning) 268.2 g [9.5 oz]
Package Length 20.8 cm [8.2 in]
Package Width 14.5 cm [5.7 in]
Package Height 42.0 mm [1.7 in]
Hårdvara 4K-stöd Ja
Snabbladdningsport(ar) Nej
Skärmstöd 2
Busstyp Thunderbolt 3
Industristandarder Thunderbolt 3
IEEE 802.3, IEEE 802.3u, IEEE 802.3ab
USB 3.0 - bakåtkompatibel med USB 2.0 och 1.1
Chipset-ID Intel - Alpine Ridge JHL6540
Intel - WGI210AT
Texas Instruments - TPS65983
ASMedia - ASM1042A
Kontakt(er) 1 - Kontakttyp(er) Thunderbolt™ 3 USB-C (24-pin) (40Gbps)
2 - Kontakttyp(er) DisplayPort (20-stifts)
1 - Kontakttyp(er) USB Type-A (9-stifts) USB 3.0 (5 Gbps)
RJ-45
Miljö Drifttemperatur 5°C to 35°C (41°F to 95°F)
Förvaringstemperatur -40°C to 70°C (-40°F to 158°F)
Luftfuktighet 5~95 % RH (icke-kondenserande)
Mjukvara OS-kompatibilitet Windows® 7, 8, 8.1, 10
macOS 10.12 - 10.15
Prestanda Maximal dataöverföringshastighet 40 Gbps (Thunderbolt 3)
5 Gbps (USB 3.0)
2 Gbps (Ethernet; Full-Duplex)
Maximal digital upplösning Dubbla 4K-skärmar - DisplayPort 4096 x 2160p @ 60Hz / 3840 x 2160p @ 60Hz
En 5K-skärm - DisplayPort 5120 × 2880 @ 60Hz
Typ och hastighet Thunderbolt 3 - 40 Gbit/s
UASP-stöd Ja
Kompatibla nätverk 10/100/1000 Mbps
Auto MDIX Ja
PXE Nej
Stöd för full-duplex Ja
Särskilda anmärkningar/krav System- och kabelkrav Thunderbolt 3-utrustad dator med en Thunderbolt 3-port.
Obs. En 4K-kapabel skärm krävs för att få 4Kx2K-upplösning (4K är även känt som 4Kx2K).
En 5K-kompatibel DisplayPort-skärm krävs för att få 5120 × 2880 upplösning.
Vissa skärmar kan vara begränsade till 4K vid 30 Hz vid anslutning genom DisplayPort. Dessa skärmar inkluderar följande modeller: Dell P2715Q, Viewsonic VX2475Smhl-4K, Philips 288P6LJEB, LG 31MU97C-B, Asus PB287Q (dessa modeller behöver ställas in till 4K vid 30 Hz).
Aktiva adaptrar krävs vid anslutning av DisplayPort till HDMI/DVI/VGA-skärmar.
För att konvertera från DP till DVI (eller HDMI, VGA) behövs en aktiv adapter som, t.ex. DP2VGA, DP2VGA2, DP2VGA3, DP2HD4KS eller DP2HD4K60S
Ström Power Source Strömförsörjd via USB
Utseende Färg Black & Gray
Kabinettyp Aluminium
Kabellängd 20 cm [7.9 in]
Produktlängd 12.0 cm [4.7 in]
Produktbredd 60.0 mm [2.4 in]
Produkthöjd 18.8 mm [0.7 in]
Produktvikt 145.8 g [5.1 oz]
Vad det är i lådan 1 - Ingår i paketet Thunderbolt 3-dockningsstation
Docking Station
Instruktionsbok
User Manual

Tillbehör

DP2DVIS

Aktiv DisplayPort till DVI-adapter

Anslut en DVI-bildskärm till DisplayPort-utgång med enkelt läge från din dator

Ditt pris
€40,99 EUR excl. VAT
€51,24 EUR incl. VAT
DP2VGA2

DisplayPort till VGA videoadapter

Anslut en VGA-skärm till en dator med DisplayPort

Ditt pris
€28,99 EUR excl. VAT
€36,24 EUR incl. VAT
DP2HD4K60S

DisplayPort till HDMI-adapter - 4K 60 Hz

Anslut din DP-dator till en HDMI-skärm med hjälp av denna konverterare, med stöd för UHD-upplösningar upp till 4K vid 60 Hz

Ditt pris
€45,99 EUR excl. VAT
€57,49 EUR incl. VAT
DP2DVID2

DisplayPort to DVI Dual Link Active Video Adapter Converter - DP to DVI-D - 2560x1600

Connect your DVI Dual Link display to a DisplayPort® video source, for high resolution applications

Ditt pris
€177,99 EUR excl. VAT
€222,49 EUR incl. VAT

Drivers/Downloads

Prata med en rådgivare.

Vi är alltid redo att hjälpa dig med alla dina frågor.

Direktchatt (opens in new window)

Produktsupport

Prata med en rådgivare.

Vi är alltid redo att hjälpa dig med alla dina frågor.

Direktchatt (opens in new window)

Vanliga frågor

Problemsökning

If you set your display to [email protected] and connect a display to the DisplayPort output on the laptop docking station, your display may flicker. This issue only affects certain monitors and is a result of an interoperability issue between the hardware used in the display and the docking station. This issue is not specific to StarTech.com docking stations.

To resolve this issue, try any of the following:

  • Connect a USB-C to DisplayPort cable from the USB-C Thunderbolt 3 port on the docking station to the DisplayPort input on the display. (StarTech.com product ID for the USB-C to DisplayPort cable: CDP2DPMM1MB.)
  • Connect a USB-C to HDMI 2.0 cable from the USB-C Thunderbolt 3 port on the docking station to the HDMI input on the display. (StarTech.com product ID for the USB-C to HDMI 2.0 cable: CDP2HD4K60.)
  • If you are using a dual monitor setup, connect a dual DisplayPort adapter from the USB-C Thunderbolt 3 port on the docking station to the DisplayPort input on the displays. (StarTech.com product ID for the Thunderbolt 3 dual DisplayPort adapter: TB32DP2.)
  • Disable MST (Multi Stream Transport) or DisplayPort 1.2 mode on your display and enable [email protected] Refer to the information provided by the manufacturer for assistance. 

If your computer is not detecting your Thunderbolt™ 3 device, try the following:

  • Update the Thunderbolt software on your Thunderbolt 3 host device.
  • Update the Thunderbolt controller NVM firmware on your Thunderbolt 3 host device.
  • Update the Thunderbolt controller drivers.
  • Update your motherboard BIOS or UEFI.

For more information about how to update the software, firmware, drivers, and BIOS or UEFI, refer to the website of the manufacturer of the Thunderbolt 3 host device. The following website includes links to some of the manufacturers of Thunderbolt 3 host devices: https://thunderbolttechnology.net/updates. If the manufacturer of your host device is not listed, you should contact the manufacturer or refer to their website for more information.

For more information about how to check which version of the Thunderbolt software and firmware you are currently using, see the following FAQ: https://www.startech.com/faq/thunderbolt-3-check-software-firmware.

For more information about Thunderbolt 3 host system and motherboard compatibility, refer to the Thunderbolt 3 Compatibility and Troubleshooting guide.

If you are only getting a single display to work with your Thunderbolt™3 device, make sure that your Thunderbolt 3 host device can support two separate DisplayPort lines over Thunderbolt 3. 

While Thunderbolt 3 supports dual monitors over a single connection, not all Thunderbolt 3 host devices are designed to meet this requirement. If your Thunderbolt 3 host device does not meet this requirement, you cannot troubleshoot this issue with software, firmware, or driver updates, and you cannot use this device to achieve dual displays over Thunderbolt 3. If you are not sure whether your Thunderbolt 3 host device supports dual monitors, contact your Thunderbolt 3 host device manufacturer.

If you confirmed that your Thunderbolt 3 host device does support dual monitors and you are only seeing a single display, see the following FAQ: https://www.startech.com/faq/thunderbolt-3-update-software-firmware.

For more information about Thunderbolt 3 host system and motherboard compatibility, refer to the Thunderbolt 3 Compatibility and Troubleshooting guide.

When you connect a Thunderbolt™ device to any Windows operating system that can support Thunderbolt 3, a pop-up message appears. To use your Thunderbolt 3 device do one of the following:

  • Select Connect Only Once.
  • Select Always Connect.

Caution! If you select Do Not Connect, only video will pass through on your Thunderbolt 3 device.

If you accidentally set a Thunderbolt™3 device to not connect to your computer when prompted by the system, you can force the software to prompt you again for authentication. To do so, complete the following:

  1. Right-click the Thunderbolt icon.
  2. Click Approve Attached Devices.
  3. Select the Thunderbolt 3 port that you want to authenticate.

To use a Thunderbolt 3 adapter to output to a display at 60Hz, your monitor must support the refresh rate and you need to set the monitor to work at 60Hz. By default, most monitors are set to DP1.1, which will not work with this Thunderbolt 3 device when you use a display at 60Hz. In most cases, you need to set your monitor's DisplayPort settings to DP1.2.

To resolve this issue, use the buttons on your monitor to change the DisplayPort settings to DP1.2. For more information about changing your monitor settings, refer to the website of the manufacturer of your monitor.

Hur man

When you connect a Thunderbolt™ device to any Windows operating system that can support Thunderbolt 3, a pop-up message appears. To use your device, complete the following:

  1. In the New Thunderbolt devices have been attached pop-up message, click OK.
  2. In the User Account Control pop-up message, click Yes.
  3. In the Approve Thunderbolt Devices pop-up message, do one of the following:
    • If you want to authorize your Thunderbolt devices every time that you connect them, select Connect Only Once in the drop-down list.
    • If you want to authorize your Thunderbolt devices only once, select Always Connect in the drop-down list.
  4. Click OK.

If you accidentally set your Thunderbolt device to Do Not Connect in step three above, refer to the following FAQ: https://www.startech.com/faq/thunderbolt-3-denied-authentication.

If you accidentally set a Thunderbolt™3 device to not connect to your computer when prompted by the system, you can force the software to prompt you again for authentication. To do so, complete the following:

  1. Right-click the Thunderbolt icon.
  2. Click Approve Attached Devices.
  3. Select the Thunderbolt 3 port that you want to authenticate.

You can use the Thunderbolt™ software to manage your Thunderbolt 3 devices on a computer running a version of Windows. To manage your Thunderbolt 3 devices, complete the following:

  1. Click Start.
  2. Type Thunderbolt and click on the search result.
  3. Right-click the Thunderbolt icon.
  4. Click Manage Approved Devices.

Before You Buy

Components

Thunderbolt™ 3 is the latest version of the Thunderbolt standard for connecting computers and electronic devices. It is capable of the following:

  • Total bandwidth up to 40Gbps. Data transfer speeds are dependent on the other features that you are using in your setup.
  • USB 3.1 Gen 2 support.
  • 4K 60Hz video on one or two separate displays.
  • 5K 60Hz video on a single display.
  • A 10 GbE network connection between two Thunderbolt 3 compatible computers.
  • Up to six devices daisy-chained from a single Thunderbolt 3 port.
  • Alternate modes, such as DisplayPort Alternate Mode (DP Alt Mode).
  • Bi-directional power delivery up to 100W (not all Thunderbolt 3 devices support power delivery).

USB-C and Thunderbolt 3

Thunderbolt 3 uses the USB-C connector, but not all host connections, cables, and devices with a USB-C connector support Thunderbolt 3. This means that a USB-C device is compatible with a Thunderbolt 3 host connection, but a Thunderbolt 3 device is not compatible with a USB-C host connection. Therefore, it is important to know whether you have a USB-C or a Thunderbolt 3 host, cable, or device.

To determine if your component is a Thunderbolt 3 device, look for the Thunderbolt 3 symbol (shown below). USB-C devices do not include this symbol.  For more information about USB-C, see the following FAQ: https://www.startech.com/faq/usb-c-port-capabilites.

Thunderbolt symbol: https://sgcdn.startech.com/005329/media/products/gallery_large/TBLT3MMXM.B.jpg.

Backwards compatibility

If you use an adapter, Thunderbolt 3 host connections are compatible with Thunderbolt 1 and Thunderbolt 2 devices. You can use the StarTech.com TBT3TBTADAP to make a Thunderbolt 3 host connections backwards compatible.

Thunderbolt 3 devices are not backwards compatible with Thunderbolt 1 and Thunderbolt 2 host connections.

Although the Thunderbolt™ 3 standard is capable of data transfer speeds up to 40Gbps, not every cable can support this bandwidth. For example, cables over a certain length or made with certain materials are only capable of data transfer speeds up to 20Gbps. 

To confirm the capability of your Thunderbolt 3 cable, refer to the information provided by the manufacturer. StarTech.com lists the capabilities of the Thunderbolt 3 cables on the individual product pages.

There are two different Thunderbolt 3 cable symbols: the 20Gbps symbol and the 40Gbps symbol. The 20Gbps symbol is composed of the Thunderbolt 3 symbol, and the 40Gbps symbol is composed of the Thunderbolt 3 symbol and the number three. These images are shown below.

Thunderbolt 3 uses the USB-C connector, but not all host connections, cables, and devices with a USB-C connector support Thunderbolt 3. This means that a USB-C device is compatible with a Thunderbolt 3 host connection, but a Thunderbolt 3 device is not compatible with a USB-C host connection. Therefore, it is important to know whether you have a USB-C or a Thunderbolt 3 host, cable, or device.

To determine if your component is a Thunderbolt 3 device, look for the Thunderbolt 3 symbol (shown below). USB-C devices do not include this symbol.  For more information about USB-C, see the following FAQ: http://www.startech.com/faq/usb-c-port-capabilites.

Thunderbolt symbol: https://sgcdn.startech.com/005329/media/products/gallery_large/TBLT3MMXM.B.jpg.

No, you cannot use this device to increase the maximum number of displays that a video card supports. For example, if your video card only supports up to three displays and you add this device to your setup, your display limit is still three displays.

If you have connected more than one of this device to the same computer and are experiencing display issues, you should make sure that your video card can support the number of displays that you are using in your setup.

Compliance and safety

Compliance letters

  • RoHS
    • Språk: English
  • WEEE
    • Språk: English

Safety Measures

  • If product has an exposed circuit board, do not touch the product under power.
  • If Class 1 Laser Product. Laser radiation is present when the system is open.
  • Wiring terminations should not be made with the product and/or electric lines under power.
  • Product installation and/or mounting should be completed by a certified professional as per the local safety and building code guidelines.
  • Cables (including power and charging cables) should be placed and routed to avoid creating electric, tripping or safety hazards.
* Produkters utseende och specifikationer kan komma att ändras utan förvarning.
Tillbaka till toppen