Produktsökning

1U hyllmonterbart USB KVM-switch-paket med 16 portar, OSD och kablar

Ett komplett USB KVM-paket med 16 portar med alla nödvändiga kablar och tillbehör

Produkt ID: SV1631DUSBUK

  • 16x 1,8 m USB KVM-kablar medföljer
  • Kombo med USB-tangentbord och -mus på 1 USB-anslutning stöds
  • OSD-säkerhetsalternativ tillåter valda KVM-portar att lösenordsskyddas från obehöriga
Ditt pris
€908,99 EUR excl. VAT
€1 136,24 EUR incl. VAT

SV1631DUSBUK USB KVM-switch-paketet med OSD och kablar för 1U-hyllmontering med 16 portar har en välutrustad KVM-switch som innehåller alla kablar och tillbehör som behövs för att enkelt och bekvämt ansluta till 16 servrar eller datorer direkt ur lådan.

USB KVM:en är ett pålitligt datorhanteringsverktyg som låter dig kontrollera upp till 16 USB-anslutna datorer från en enda uppsättning av tangentbord, mus och skärm samt ger maximal kontroll över växlingar med genvägskommandon och knappar på frontpanelen samt en behändig OSD.

Switchen med 16 portar passar bra i serverrum och kan hyllmonteras i 1U-utrymmen samt överlappas med flera KVM-switchar för att få kontroll över upp till 136 datorer från en enda switch.

Täcks av StarTech.coms 3-årsgaranti och gratis livstidsgaranti på teknisk support.

Användning

  • Hantera dina serverkluster effektivt från en enda konsol
  • Användbart vid QA-test av mjukvara då man testar över flera plattformar
  • Perfekt för PC-test/ datorkontroll med inbränning och man slipper kostnader för köp av extra kringutrustning
  • Central kontroll för multipla system i ett datacenter
  • Systemhantering i ISP-/samplacerade inrättningar
  • Datorkontroll och -hantering vid tillverkningslinjer

Fördelarna med StarTech.com

  • För en enkel installation medföljer KVM-kablar för att ansluta alla 16 portar till servrar och datorer
  • Denna unika KVM har maximal kompabilitet med USB-tangentbord och -möss samt trådlösa installationer och känner av tangentbordstryck via USB-anslutningen för att garantera problemfria installationer

Partnernummer

  • Ingram Micro Sweden V931609
  • UPC 065030840828

Kompatibilitet

Specifikationer

Warranty Information Warranty 3 Years
Förpackning Package Height 12 cm [4,7 in]
Package Length 59,3 cm [23,3 in]
Fraktvikt (förpackning) 6,1 kg [13,4 lb]
Package Width 26,3 cm [10,4 in]
Hårdvara Audio Nej
KVM-portar 16
PC-gränssnitt USB
PC-videotyp VGA
Flera skärmar 1
Hyllmonterbar Ja
Medföljande kablar Ja
Kedjekoppling Ja
Indikatorer 1 - LED-indikatorer Grön – ström
16 - LED-indikatorer Grön - Dator online
Röd - Dator vald
Kontakt(er) 2 - Konsolgränssnitt USB Type-A (4-stifts) USB 2.0
1 - Konsolgränssnitt VGA (15-stifts, High Density D-Sub)
16 - Värdkontakter VGA (15-stifts, High Density D-Sub)
Miljö Drifttemperatur 5°C to 40°C (41°F to 104°F)
Förvaringstemperatur -20°C to 60°C (-4°F to 140°F)
Luftfuktighet 0~80 % RH
Mjukvara OS-kompatibilitet OS independent; No software or drivers required
Prestanda Skärmvisning (OSD) & stöd för snabbtangenter Ja
IP-kontroll Nej
Hot-Key Selection Ja
Maximal analog upplösning 1920 x [email protected] (1920 x [email protected] - Wide Screen)
Stöd för widescreen Ja
Maximalt antal användare 1
Maximalt antal överlappade datorer 136
Stöd för portval Tryckknapp, genvägskommandon och OSD (visning på skärmen)
Medeltid mellan fel (MTBF) 158000 hours
Ström Power Source AC-adapter medföljer
Inspänning 100 - 240 AC
Utspänning 9V DC
Utström 1A
Polaritet på mittpol Positiv
Strömförbrukning 9
Utseende Produktvikt 2,4 kg [5,3 lb]
Färg Svart
Kabinettyp Stål
Produktbredd 44 cm [17,3 in]
Produkthöjd 45 mm [1,8 in]
Produktdjup 19 cm [7,5 in]
Vad det är i lådan 1 - Ingår i paketet USB KVM-switch med 16 portar
2 - Ingår i paketet Monteringsfästen
16 - Ingår i paketet 1,8 m 2-i-1 USB VGA KVM-kablar
1 - Ingår i paketet Skruvsats
4 - Ingår i paketet möbeltassar
1 - Ingår i paketet Universell strömadapter (NA/EU/UK/AU)
Instruktionsbok

Tillbehör

USB3SEXT1MBK

1m Black SuperSpeed USB 3.0 Extension Cable A to A - M/F

Extend your SuperSpeed USB 3.0 cable by up to an additional meter

Ditt pris
€9,99 EUR excl. VAT
€12,49 EUR incl. VAT
SVA9M2NEUA

DC-strömadapter - 9 V, 2 A

Byt ut din borttappade eller trasiga strömadapter

Ditt pris
€21,99 EUR excl. VAT
€27,49 EUR incl. VAT
USB3SEXT2MBK

2 m svart SuperSpeed USB 3.0-förlängningskabel A till A - M/F

Förläng din SuperSpeed USB 3.0-kabel med upp till 2 meter

Ditt pris
€11,99 EUR excl. VAT
€14,99 EUR incl. VAT
SVUSBVGA6

6 ft Ultra-Thin USB VGA 2-in-1 KVM Cable

Connect VGA video and USB using a single thin KVM cable

Ditt pris
€12,99 EUR excl. VAT
€16,24 EUR incl. VAT
SVUSBVGA10

10 ft Ultra-Thin USB VGA 2-in-1 KVM Cable

Connect VGA video and USB using a single thin KVM cable

Ditt pris
€18,99 EUR excl. VAT
€23,74 EUR incl. VAT
SVECONUS6

1,8 m 2-i-1 ultratunn USB KVM-kabel

Anslut VGA-video och USB genom att använda en enda tunn KVM-kabel

Ditt pris
€12,99 EUR excl. VAT
€16,24 EUR incl. VAT
SVECONUS10

3 m ultratunn USB VGA 2-i-1 KVM-kabel

Anslut VGA-video och USB genom att använda en enda tunn KVM-kabel

Ditt pris
€18,99 EUR excl. VAT
€23,74 EUR incl. VAT
SVECONUS15

4,5 m 2-i-1 ultratunn USB KVM-kabel

Anslut VGA-video och USB genom att använda en enda tunn KVM-kabel

Ditt pris
€26,99 EUR excl. VAT
€33,74 EUR incl. VAT
SV565UTPUL

USB VGA KVM-konsolförlängare över Cat5 UTP med lång räckvidd – 304,8 m

Kontrollera en KVM eller server på upp till 300 m avstånd

Ditt pris
€577,99 EUR excl. VAT
€722,49 EUR incl. VAT
MXT101MMHQ3

3 ft Coax High Resolution Monitor VGA Cable - HD15 M/M

Connect your VGA monitor with the highest quality connection available

Ditt pris
€8,99 EUR excl. VAT
€11,24 EUR incl. VAT
MXT101MMHQ10

10 ft Coax High Resolution VGA Monitor Cable HD15 M/M

Connect your VGA monitor with the highest quality connection available

Ditt pris
€14,99 EUR excl. VAT
€18,74 EUR incl. VAT
MXT101MMHQ25

7,6 m koaxialkabel för VGA-skärm med hög upplösning, HD15 M/M

Anslut din VGA-skärm med anslutning av högsta tillgängliga kvalitet.

Ditt pris
€25,99 EUR excl. VAT
€32,49 EUR incl. VAT
MU1MMS

1 ft Slim 3.5mm Stereo Audio Cable - M/M

Connect an iPhone® or other MP3 player to a car stereo

Ditt pris
€3,99 EUR excl. VAT
€4,99 EUR incl. VAT
MU3MMS

91 cm Slim 3,5 mm stereoaudiokabel - M/M

Anslut enkelt en iPod® eller annan MP3-spelare till bilstereon

Ditt pris
€3,99 EUR excl. VAT
€4,99 EUR incl. VAT
MU6MMS

6 ft Slim 3.5mm Stereo Audio Cable - M/M

Connect an iPhone® or other MP3 player to a car stereo

Ditt pris
€3,99 EUR excl. VAT
€4,99 EUR incl. VAT
MU10MMS

3 m Slim 3,5 mm stereoaudiokabel - M/M

3 m slimmad 3,5 mm stereoaudiokabel

Ditt pris
€4,99 EUR excl. VAT
€6,24 EUR incl. VAT
MU15MMS

4,5 m Slim 3,5 mm stereoaudiokabel - M/M

Anslut enkelt en iPod eller annan MP3-spelare till stereon

Ditt pris
€5,99 EUR excl. VAT
€7,49 EUR incl. VAT

Drivers/Downloads

Prata med en rådgivare.

Vi är alltid redo att hjälpa dig med alla dina frågor.

Direktchatt (opens in new window)

Datasheet

Produktsupport

Prata med en rådgivare.

Vi är alltid redo att hjälpa dig med alla dina frågor.

Direktchatt (opens in new window)

Vanliga frågor

Installation

  1. Turn off all of the computers and monitors that will be connected to the KVM switch.
  2. Connect the power adapter to the KVM switch.
  3. Connect the video cables from your monitors to the console video port on the KVM switch. 
  4. Turn on the monitors.
  5. Connect your keyboard and mouse to the console PS/2 or USB ports on the KVM switch.
  6. If you have not done so already, change the KVM switch to focus on port 1.
  7. Connect the video cables from PC1 to the KVM switch.
  8. Connect the PS/2 or USB cables from PC1 to the PC1 PS/2 or USB ports on the KVM switch.
  9. Turn on PC1. You should see the computer load the operating system that you are using on PC1.
  10. Make sure that the mouse and keyboard can control PC1.
  11. Repeat steps 4 to 8 for each additional computer that you want to connect to the KVM switch. Leave the computer in focus until you make sure that the mouse and keyboard can control the computer in step 8.

Problemsökning

There are some quick tests that you can perform to rule out potential issues. Start by turning off all of the connected computers and peripherals, unplugging everything from the KVM, including power, and leaving it for 10 seconds.  Then connect everything to the KVM following the procedure in the following FAQ: https://www.startech.com/faq/kvm-switches-setup.

You can test to make sure that the following components are working correctly and are not the source of the issue:

  • Video cables

  • KVM switch

  • Video source (such as a DVR or computer)

  • Video destination (such as a monitor or projector)

Note: When you are testing your setup components, it is recommended that you avoid using any video adapters. For example, if you are converting a VGA source to HDMI to be used with an HDMI extender, you should test with an HDMI source.

To test your setup components, try the following:

  • Use the video cable, KVM switch, video source, and video destination in another setup to see if the problem is with the components or the setup.

  • Use a different video cable, KVM switch, video source, and video destination in your setup to see if the problem persists. Ideally, you should test a component that you know works in another setup.

When you test your cables, it is recommended that you do the following:

  • Test each cable individually.

  • Use short cables when you are testing.

When you test the video source and video destination, it is recommended that you do the following:

  • Remove the KVM switch from your setup and test to make sure that the video source and video destination work together without the KVM switch.

  • Test to make sure that the video source and video destination work together at the resolution that you want to use.

Note: In order for your setup to work properly, the video source, KVM switch, and video destination all need to support the resolution that you are using.

There are four troubleshooting actions that you can try if some but not all of the ports and your computer are working with the KVM switch. 

  • To determine if a specific cable is the source of the problem, switch the cables that connect the KVM switch to the computers to one working port and computer, and one port and computer that is not working. Keep the computer plugged into the same ports and only switch the cables. If the issue persists when you switch cables, the issue may be with the cable itself.
  • To determine if the problem is between the computer and the KVM switch, using the same cables, connect the KVM switch to one computer that is working and one computer that is not working. If the issue persists when you switch computers, follows the issue may be with the computer and the KVM switch.
  • Try reinitializing the KVM.  This is done by following the setup instructions on the website.
  • To determine if the KVM switch is the source of the problem, if you have another KVM switch, disconnect the current KVM switch and connect the second KVM switch.

If the keys on your keyboard are repeating, complete the following:

  1. If the KVM you are using has USB ports, you can move your keyboard to the USB hub port on the back of the KVM (the USB hubs are marked).

Note: When you move the keyboard out of the keyboard port, you will not be able to access the hotkeys.

  1.  You can adjust the typematic rate in your operating system’s settings. Depending on the version of Windows you are running, you can adjust the typematic rate by doing one of the following:
    • Click Control Panel > Keyboard > Speed. Adjust the repeat delay and repeat rate until the keys no longer repeat.
    • Click Control Panel > Hardware and Sound > Devices and Printers. Right-click Keyboard Settings. Adjust the repeat delay and repeat rate until the keys no longer repeat.

Hur man

The Link Port that comes with this KVM switch was intended to be used with our SV831MEDIA product. This product was discontinued, so the Link Port no longer serves a purpose.

Before You Buy

KVM stands for Keyboard Video Mouse and KVM switches allow you to switch the use of a keyboard, display and mouse between multiple computers.  KVM switches also commonly let you switch audio and USB devices between computers.

There are different types of KVM switches as well.

  • Standard box KVM switches. (e.g. SV231USB)
  • Cable KVM switches. (e.g. SV211USB)
  • Multi-Monitor KVM switches.  (e.g. SV231DDUSB)
  • IP KVM switches. (e.g. SV841HDIE)

Standard box and cable KVM switches are a simple way to switch the use of a keyboard, display, and mouse between multiple computers.  Multi-monitor KVM switches allow you to switch multiple displays between computers, and IP KVM switches allow you to remotely control the KVM switch and connected computers over a network.

Here are some important things to consider before purchasing a KVM switch.

  • How many computers do you need to control?  Purchase a KVM switch that supports the number of computers in your setup.
  • Which video connections do your computers and display(s) support?  It is best practice to use the same video connections wherever possible.
  • Will you be using a PS/2 or USB mouse and keyboard?
  • Do you need multiple monitor support?  Ensure every computer can support the number of monitors you are looking to use in your setup.
  • Do you need audio support?
  • What resolution(s) do you want your display(s) running at?  The KVM switch must support the resolution(s) you want to use.
  • Would you like hotkey support?  Some KVM switches support the use of hotkey combinations to complete tasks such as switching between computers.

There are a couple of other important things you may want to take note of:

  • Some KVM switches require proprietary cables to function.  These KVM cables may vary by each KVM switch.  For StarTech.com KVM switches that require proprietary cables, the KVM switches will either come with these cables, or they will be listed in the Accessories tab on the individual product pages.  For more information, see our video dedicated to KVM switch cables.
  • Basic mice and keyboards are recommended for use with KVM switches.  Wireless, gaming or combo mice and keyboards (mice and keyboards that use a single USB connection / receiver for both units) can cause performance issues, and in general, are not supported for use with KVM switches.

It can be difficult to tell which ones are right for the KVM switch you are interested in.  How can you tell which KVM cables you require?  How can you tell if a KVM switch requires proprietary cables?  How do these cables work? 

Standard KVM Switches and Cables

Note: You will need one bundle of KVM cables per computer you want to connect to the KVM switch.

Standard KVM switches have no special cable requirements.  If you have spare video and PS/2 or USB cables, you can use them to hook up the KVM switch to your computers.  StarTech.com still sells KVM cable packages, but they are just for the convenience of buying them in bundles and usually involve some savings.  Keep in mind that even if you have some of the cables you need, it still might be advantageous to buy the bundle.

KVM Switches with Opposite Gender Video Connections

Some KVM switches use male video connections for the computers and female video connections for the console ports.  In this case you simply need a video extension cable, or a KVM cable package appropriate to the KVM switch.  This is so you cannot accidentally plug cables from your computer into the console ports.

KVM Switches Requiring Proprietary Cables

KVM switches can also use proprietary KVM cables to connect to the individual computers.  This is often done with larger KVM switches and KVM switches intended for a server environment.  These cables use a proprietary pinout which does not conform to the video standard in use, as the cable carries both the video and PS/2 or USB data along a single cable.

If you are unsure whether or not you need special cables, complete the following:

  1. Check the Technical Specifications tab on the individual product pages for What's in the Box.  This section lists everything that comes with your purchase, and your KVM switch might come with the cables.
  2. Check the Accessories tab.  This section lists potential accessories for the product you are looking at.  StarTech.com will list the appropriate KVM cables for the KVM switch here. 
  3. Check the Gallery and look at a picture of the back of the KVM switch.

Note: If there are no PS/2 or USB ports on the back of the KVM switch other than for the console, you will require proprietary cables.

If at this point you require further assistance in deciding which cables to purchase with your StarTech.com KVM switch, contact our technical support team.  

Whether a specific mouse or keyboard will work with StarTech.com KVM switches can depend on the type of mouse or keyboard you use.  Any mice with additional functionality or keyboards that are not standard 104 key keyboards could cause issues.  This includes wireless, gaming, combination (one USB receiver for both the mouse and keyboard), and Apple keyboards.  We recommend that you use a standard wired mouse and keyboard with our KVM switches, especially when you troubleshoot issues.

If you cannot get a specific mouse or keyboard to work with your KVM switch, connect the mouse or keyboard into the USB hub ports, if available (they are marked on the back of the KVM switch). If the KVM switch has hotkey functionality, you will lose the functionality when using these hub ports.

Compliance and safety

Compliance letters

Safety Measures

  • If product has an exposed circuit board, do not touch the product under power.
  • If Class 1 Laser Product. Laser radiation is present when the system is open.
  • Wiring terminations should not be made with the product and/or electric lines under power.
  • Product installation and/or mounting should be completed by a certified professional as per the local safety and building code guidelines.
  • Cables (including power and charging cables) should be placed and routed to avoid creating electric, tripping or safety hazards.
* Produkters utseende och specifikationer kan komma att ändras utan förvarning.
Vänta...
Tillbaka till toppen