2 Port USB HDMI Cable KVM Switch with Audio and Remote Switch – USB Powered

Control two HDMI®, USB equipped PCs with a single monitor, keyboard, mouse and audio peripheral set

Produkt ID: SV211HDUA

  • Supports HD resolutions (1080p - 1920x1200)
  • Switch PCs via push-button, hot-keys or switching software
  • Space-saving design, minimal footprint
Ditt pris
€118,99 EUR excl. VAT
€148,74 EUR incl. VAT

The SV211HDUA 2-Port HDMI® Cable KVM Switch with Audio and Remote Switching Control lets you control two HDMI, USB equipped PCs with a single monitor, keyboard, mouse and audio peripheral set.

To help organize your desk without sacrificing work space, this compact HDMI USB KVM  features integrated cables that can be connected directly to your system, while leaving a minimal footprint. The switch features a remote push-button on a 1.5 meter (5ft) integrated cable that can be placed in an easily accessible location, as well as keyboard hot-keys, and PC or Mac® compatible software for switching between systems. To eliminate the need for a bulky external power adapter and wall outlet, the HDMI KVM switch is USB-powered.

This KVM with HDMI video capability offers support for 1080p HD resolutions (up to 1920x1200) for the ability to drive a large HDMI display for applications that require high graphical output.

Backed by a StarTech.com 2-year warranty and free lifetime technical support.

Användning

  • Great for PC test/burn-in computer control, saving the desk space required for two monitors, keyboards and mice
  • Perfect for sharing computers and attached peripherals in the home or home office
  • Dual system control for single user workstations increasing user productivity in the office

Fördelarna med StarTech.com

  • Avoid cabling hassles with integrated KVM and remote switch cables
  • Save desk space with a compact design
  • Switch between systems easily using the included remote switch

Partnernummer

  • Ingram Micro Sweden V932948
  • ALSO Sweden 000000000002764245
  • UPC 065030851060

Kompatibilitet

  • Windows 8 logo
  • Mac OS X Mavericks (10.9) logo
  • Windows Server 2012 logo
  • Windows 7 logo
  • Windows Server 2016 logo
  • Windows Server 2019 logo
  • Windows Server 2019 logo
Windows® 2000, XP, Vista, 7, 8, 8.1, 10
Windows Server® 2003, 2008 R2, 2012, 2016, 2019
Mac OS 10.6 till 10.9

Specifikationer

Warranty Information Warranty 2 Years
Förpackning Package Height 62 mm [2,4 in]
Package Length 25 cm [9,8 in]
Fraktvikt (förpackning) 0,5 kg [1,0 lb]
Package Width 16,1 cm [6,3 in]
Hårdvara Audio Ja
KVM-portar 2
PC-gränssnitt USB
PC-videotyp HDMI
Flera skärmar 1
Hyllmonterbar Nej
Medföljande kablar Ja
Industristandarder HDCP
Kedjekoppling Nej
Indikatorer LED-indikatorer 1 - PC Selection indictor
Kontakt(er) Konsolgränssnitt 1 - HDMI (19-stifts)
2 - 3.5 mm minijack (3-polig)
2 - USB Type-A (4-stifts) USB 2.0
Värdkontakter 1 - USB Type-A (4-stifts) USB 2.0
1 - HDMI (19-stifts)
2 - 3.5 mm minijack (3-polig)
Miljö Drifttemperatur 0°C to 40°C (32°F to 104°F)
Förvaringstemperatur -20°C to 60°C (4°F to 140°F)
Luftfuktighet 0~90% RH Non-Condensing
Mjukvara OS-kompatibilitet Windows® 2000, XP, Vista, 7, 8, 8.1, 10
Windows Server® 2003, 2008 R2, 2012, 2016, 2019
Mac OS 10.6 till 10.9
Prestanda Skärmvisning (OSD) & stöd för snabbtangenter Nej
IP-kontroll Nej
Hot-Key Selection Ja
Audio-specifikationer 3.5mm and HDMI audio supported
Stöd för portval Tryckknapp, genvägskommandon och mjukvara
Ström Power Source Strömförsörjd via USB
Särskilda anmärkningar/krav Obs. OS Compatibility refers to KVM software only - the KVM itself can be used without software on any platform
Utseende Produktvikt 350 g [12,3 oz]
Färg Svart
Kabinettyp Av plast
Kabellängd 850 mm [33,5 in]
Produktlängd 8,8 cm [3,5 in]
Produktbredd 66 mm [2,6 in]
Produkthöjd 2,3 cm [0,9 in]
Vad det är i lådan Ingår i paketet 1 - KVM Switch
1 - Software CD
1 - Instruction Manual

Drivers/Downloads

Prata med en rådgivare.

Vi är alltid redo att hjälpa dig med alla dina frågor.

Direktchatt (opens in new window)

Diagram:

Manual(er):

Mjukvara

Datasheet

Produktsupport

Prata med en rådgivare.

Vi är alltid redo att hjälpa dig med alla dina frågor.

Direktchatt (opens in new window)

Vanliga frågor

Problemsökning

If the keys on your keyboard are repeating, complete the following:

  1. If the KVM you are using has USB ports, you can move your keyboard to the USB hub port on the back of the KVM (the USB hubs are marked).

Note: When you move the keyboard out of the keyboard port, you will not be able to access the hotkeys.

  1.  You can adjust the typematic rate in your operating system’s settings. Depending on the version of Windows you are running, you can adjust the typematic rate by doing one of the following:
    • Click Control Panel > Keyboard > Speed. Adjust the repeat delay and repeat rate until the keys no longer repeat.
    • Click Control Panel > Hardware and Sound > Devices and Printers. Right-click Keyboard Settings. Adjust the repeat delay and repeat rate until the keys no longer repeat.

There are some quick tests that you can perform to rule out potential issues. Start by turning off all of the connected computers and peripherals, unplugging everything from the KVM, including power, and leaving it for 10 seconds.  Then connect everything to the KVM following the procedure in the following FAQ: https://www.startech.com/faq/kvm-switches-setup.

You can test to make sure that the following components are working correctly and are not the source of the issue:

  • Video cables

  • KVM switch

  • Video source (such as a DVR or computer)

  • Video destination (such as a monitor or projector)

Note: When you are testing your setup components, it is recommended that you avoid using any video adapters. For example, if you are converting a VGA source to HDMI to be used with an HDMI extender, you should test with an HDMI source.

To test your setup components, try the following:

  • Use the video cable, KVM switch, video source, and video destination in another setup to see if the problem is with the components or the setup.

  • Use a different video cable, KVM switch, video source, and video destination in your setup to see if the problem persists. Ideally, you should test a component that you know works in another setup.

When you test your cables, it is recommended that you do the following:

  • Test each cable individually.

  • Use short cables when you are testing.

When you test the video source and video destination, it is recommended that you do the following:

  • Remove the KVM switch from your setup and test to make sure that the video source and video destination work together without the KVM switch.

  • Test to make sure that the video source and video destination work together at the resolution that you want to use.

Note: In order for your setup to work properly, the video source, KVM switch, and video destination all need to support the resolution that you are using.

There are four troubleshooting actions that you can try if some but not all of the ports and your computer are working with the KVM switch. 

  • To determine if a specific cable is the source of the problem, switch the cables that connect the KVM switch to the computers to one working port and computer, and one port and computer that is not working. Keep the computer plugged into the same ports and only switch the cables. If the issue persists when you switch cables, the issue may be with the cable itself.
  • To determine if the problem is between the computer and the KVM switch, using the same cables, connect the KVM switch to one computer that is working and one computer that is not working. If the issue persists when you switch computers, follows the issue may be with the computer and the KVM switch.
  • Try reinitializing the KVM.  This is done by following the setup instructions on the website.
  • To determine if the KVM switch is the source of the problem, if you have another KVM switch, disconnect the current KVM switch and connect the second KVM switch.

Hur man

To confirm that the Mac OS detects your USB device, complete the following:

  1. Click the Apple icon.
  2. Click About This Mac.
  3. Click More Info or System Report.
  4. Under the appropriate heading, confirm that your USB device is listed and that there isn't an error. For example, a network card would be under Ethernet Cards.

You may need to refresh the System Information page after you plug in your device.  To do so, press Command R with the System Information page open.

Your USB device is listed according to the name of the chipset. To determine the name of the chipset of your USB device, navigate to www.StarTech.com and look on the Technical Specifications tab for your product.

Compliance and safety

Compliance letters

Safety Measures

  • If product has an exposed circuit board, do not touch the product under power.
  • If Class 1 Laser Product. Laser radiation is present when the system is open.
  • Wiring terminations should not be made with the product and/or electric lines under power.
  • Product installation and/or mounting should be completed by a certified professional as per the local safety and building code guidelines.
  • Cables (including power and charging cables) should be placed and routed to avoid creating electric, tripping or safety hazards.
* Produkters utseende och specifikationer kan komma att ändras utan förvarning.
Tillbaka till toppen