Produkt ID: SV215MICDVIA
SV215MICDVIA USB DVI-kabel med 2 portar och KVM-switch med ljud gör det möjligt att kontrollera 2 datorer from en KVM-kringutrustningssats (tangentbord, video, mus), och den stödjer upplösningar upp till 1920 x 1200.
Den här KVM-switchen i kabelstil inkluderar alla kablar och kontakter som krävs för en komplett KVM-lösning. Switchen har dessutom oberoende växling mellan ljud/mikrofon för att säkerställa en smidig ljudupplevelse även när man växlar mellan datorerna.
Den här USB KVM-switchen med bred kompatibilitet kan kopplas till Mac, Linux eller PC-baserade datorer vilket gör den till en praktisk lösning för de flesta. På grund av sin sparsamma design behöver den inget skrivbordsutrymme för installation. Den är ett perfekt val för de flesta applikationer, inklusive små eller hemmakontor, spel, multimedia produktioner, arbetsstationer m.m.
Täcks av StarTech.coms 2-årsgaranti och gratis livstidsgaranti på teknisk support.
|Warranty Information||Warranty||2 Years|
|Förpackning||Package Length||24,8 cm [9,8 in]|
|Package Width||86 mm [3,4 in]|
|Package Height||15,5 cm [6,1 in]|
|Fraktvikt (förpackning)||0,7 kg [1,6 lb]|
|Kontakt(er)||2 - Konsolgränssnitt||USB Type-A (4-stifts) USB 2.0|
|3.5 mm minijack (3-polig)|
|1 - Konsolgränssnitt||DVI-D (19-stifts)|
|4 - Värdkontakter||USB Type-A (4-stifts) USB 2.0|
|3.5 mm minijack (3-polig)|
|2 - Värdkontakter||DVI-D (19-stifts)|
|Miljö||Drifttemperatur||0°C to 50°C (32°F to 122°F)|
|Förvaringstemperatur||-20°C to 60°C (-4°F to 140°F)|
|Luftfuktighet||0 ~ 80 % RH|
|Mjukvara||OS-kompatibilitet||OS independent; No software or drivers required|
|Prestanda||Skärmvisning (OSD) & stöd för snabbtangenter||Nej|
|DVI-stöd||Ja - Single Link|
|Maximal digital upplösning||1920 x 1200|
|Maximalt antal användare||1|
|Stöd för portval||Tryckknapp och genvägskommandon|
|Särskilda anmärkningar/krav||Obs.||En värdkabel är 1,1 meter lång, den andra är 60 centimeter. Fjärrvalskabeln är 1,7 meter lång|
|Produktvikt||620 g [21,9 oz]|
|Vad det är i lådan||1 - Ingår i paketet||Integrerad KVM med 2 portar|
There are some quick tests that you can perform to rule out potential issues. Start by turning off all of the connected computers and peripherals, unplugging everything from the KVM, including power, and leaving it for 10 seconds. Then connect everything to the KVM following the procedure in the following FAQ: https://www.startech.com/faq/kvm-switches-setup.
You can test to make sure that the following components are working correctly and are not the source of the issue:
Video source (such as a DVR or computer)
Video destination (such as a monitor or projector)
Note: When you are testing your setup components, it is recommended that you avoid using any video adapters. For example, if you are converting a VGA source to HDMI to be used with an HDMI extender, you should test with an HDMI source.
To test your setup components, try the following:
Use the video cable, KVM switch, video source, and video destination in another setup to see if the problem is with the components or the setup.
Use a different video cable, KVM switch, video source, and video destination in your setup to see if the problem persists. Ideally, you should test a component that you know works in another setup.
When you test your cables, it is recommended that you do the following:
Test each cable individually.
Use short cables when you are testing.
When you test the video source and video destination, it is recommended that you do the following:
Remove the KVM switch from your setup and test to make sure that the video source and video destination work together without the KVM switch.
Test to make sure that the video source and video destination work together at the resolution that you want to use.
Note: In order for your setup to work properly, the video source, KVM switch, and video destination all need to support the resolution that you are using.
There are four troubleshooting actions that you can try if some but not all of the ports and your computer are working with the KVM switch.
If the keys on your keyboard are repeating, complete the following:
Note: When you move the keyboard out of the keyboard port, you will not be able to access the hotkeys.
The SV215MICDVIA is USB powered. The USB connection must be made to both computers for the SV215MICDVIA to work, even if you only want to use video.
Digital Visual Interface (DVI) is a video display interface that can contain different types of signaling, based on the application. DVI cables and ports are created using different connector types to identify what application they are intended to be used in. The connector types are identified by the number of pins on the DVI connector. DVI comes in the following five different connector types:
Single and Dual link DVI indicate the maximum resolution capabilities of the video source or video destination. The maximum resolutions are Single Link (1920 x 1080 @ 60Hz) and Dual Link (2560 x 1600 @ 60Hz).
Note: The maximum resolution of your video source and video destination are ultimately determined by the technical specifications of the devices. The connector type is not a definitive indicator of the maximum resolution.
DVI-A carries only analog (for example, VGA) with no digital component. DVI-D carries only digital video (for example, HDMI) with no analog component. DVI-I combines DVI-A and DVI-D connections to include both analog and digital components. A DVI-I port may be on either your video source or display, but whether or not a display carries either or both analog and digital sources depends on the technical specifications of your device.
KVM stands for Keyboard Video Mouse and KVM switches allow you to switch the use of a keyboard, display and mouse between multiple computers. KVM switches also commonly let you switch audio and USB devices between computers.
There are different types of KVM switches as well.
Standard box and cable KVM switches are a simple way to switch the use of a keyboard, display, and mouse between multiple computers. Multi-monitor KVM switches allow you to switch multiple displays between computers, and IP KVM switches allow you to remotely control the KVM switch and connected computers over a network.
Here are some important things to consider before purchasing a KVM switch.
There are a couple of other important things you may want to take note of:
It can be difficult to tell which ones are right for the KVM switch you are interested in. How can you tell which KVM cables you require? How can you tell if a KVM switch requires proprietary cables? How do these cables work?
Standard KVM Switches and Cables
Note: You will need one bundle of KVM cables per computer you want to connect to the KVM switch.
Standard KVM switches have no special cable requirements. If you have spare video and PS/2 or USB cables, you can use them to hook up the KVM switch to your computers. StarTech.com still sells KVM cable packages, but they are just for the convenience of buying them in bundles and usually involve some savings. Keep in mind that even if you have some of the cables you need, it still might be advantageous to buy the bundle.
KVM Switches with Opposite Gender Video Connections
Some KVM switches use male video connections for the computers and female video connections for the console ports. In this case you simply need a video extension cable, or a KVM cable package appropriate to the KVM switch. This is so you cannot accidentally plug cables from your computer into the console ports.
KVM Switches Requiring Proprietary Cables
KVM switches can also use proprietary KVM cables to connect to the individual computers. This is often done with larger KVM switches and KVM switches intended for a server environment. These cables use a proprietary pinout which does not conform to the video standard in use, as the cable carries both the video and PS/2 or USB data along a single cable.
If you are unsure whether or not you need special cables, complete the following:
Note: If there are no PS/2 or USB ports on the back of the KVM switch other than for the console, you will require proprietary cables.
If at this point you require further assistance in deciding which cables to purchase with your StarTech.com KVM switch, contact our technical support team.
Whether a specific mouse or keyboard will work with StarTech.com KVM switches can depend on the type of mouse or keyboard you use. Any mice with additional functionality or keyboards that are not standard 104 key keyboards could cause issues. This includes wireless, gaming, combination (one USB receiver for both the mouse and keyboard), and Apple keyboards. We recommend that you use a standard wired mouse and keyboard with our KVM switches, especially when you troubleshoot issues.
If you cannot get a specific mouse or keyboard to work with your KVM switch, connect the mouse or keyboard into the USB hub ports, if available (they are marked on the back of the KVM switch). If the KVM switch has hotkey functionality, you will lose the functionality when using these hub ports.
This device has a DVI-D connector and is only compatible with digital DVI video signaling. For more information about the different DVI connectors, refer to the following FAQ: https://www.startech.com/faq/video_signal_converters_dvi_interface.
|VGA||DVI to VGA: https://www.startech.com/AV/Converters/Video/?filter_AVINPUT=DVI-D&filter_AVOUTPUT=VGA.|
|DisplayPort||DVI to DisplayPort: https://www.startech.com/AV/Converters/Video/?filter_AVINPUT=HDMI&filter_AVOUTPUT=DisplayPort.|