StarTech.com

DisplayPort till HDMI aktiv video och audio-adapter - DP till HDMI - 1920x1200

Anslut en HDMI®-skärm till en DisplayPort®-videokälla

Produkt ID: DP2HDS

  • Stöder upplösningar på upp till 1920x1200
  • Stöder alla HDMI® -skärmar, inklusive TV-apparater och Apple Cinema Display HD
  • DisplayPort-kontakt med lås
Visa mer
  • Kompatibelt med DisplayPort 1.1a-specifikationer
  • Stöder HDCP 1.3
  • Fungerar med videokort som inte kan ge DP++-utsignaler (multiläge)
  • 5.1 surroundljudgenomströmmning
40,99 € EUR exkl. moms
51,24 € EUR inkl. moms

Överblick

DP2HDS-adaptern konverterar en DisplayPort till HDMI® med stöd för ljudgenomströmning så att du kan ansluta en stationär eller bärbar dator som har ett DisplayPort-A/V-uttag till en HDMI®-skärm, -projektor eller -skärm.

Till skillnad från passiva adaptrar konverterar DP2HDS DisplayPort-utdata i enkelläge och dubbelläge aktivt, vilket är idealiskt för grafikkort som inte skickar signaler i enkelläge/multiläge (DP++) som t.ex. ATI™ Eyefinity-kort.

Täcks av StarTech.coms 2-årsgaranti och gratis livstidsgaranti på teknisk support.

Fördelarna med StarTech.com

  • Stödjer både multiläges (DP++) och enkelläges DisplayPort-utsignaler via aktiv DisplayPort®-konvertering

Användning

Anpassa dig till grafikkort som inte kan ge DP++-utsignaler (multiläge)

Behåll en befintlig HDMI®-skärm och använd den med din nya DisplayPort®-dator eller andra videokällor

Perfekt för att använda HDMI®-bildskärmen som en andra bildskärm

Den är perfekt för digitala underhållningscentra, hemmakontor, konferensrum för företag och visningar på mässor

Tekniska specifikationer

Information om garanti
Garanti 2 Years
Hårdvara
Active or Passive Adapter Aktiv
Adapterstil Adaptrar
Audio Ja
AV-ingång DisplayPort
AV-utgång HDMI
Industristandarder HDCP
DisplayPort 1.1a
Prestanda
Audio-specifikationer 5.1 surroundljud
Maximal digital upplösning 1920x1200
Stöd för widescreen Ja
Kontakt(er)
Connector A 1 - DisplayPort (20-stifts) Med lås Hane
Connector B 1 - HDMI (19-stifts) Hona
Miljö
Drifttemperatur 0°C to 60°C (32°F to 140°F)
Förvaringstemperatur 0°C to 70°C (32°F to 158°F)
Luftfuktighet 40 %-85 %RH
Utseende
Färg Svart
Produktbredd 45 mm [1.8 in]
Produkthöjd 15 mm [0.6 in]
Produktlängd 210 mm [8.3 in]
Produktvikt 35 g [1.2 oz]
Förpackning
Fraktvikt (förpackning) 45 g [1.6 oz]
Vad det är i lådan
Ingår i paketet 1 - DisplayPort® till HDMI® aktiv adapter

Certifikat

Relaterade produkter

Aktiv Mini DisplayPort till DVI-adapter
MDP2DVIS
Aktiv Mini DisplayPort till DVI-adapter

Anslut en DVI-bildskärm till DisplayPort-utgång med enkelt läge från din dator

40,99 € exkl. moms
51,24 € inkl. moms
DisplayPort till VGA videoadapter
DP2VGA
DisplayPort till VGA videoadapter

Anslut din VGA-bildskärm till en DisplayPort-utrustad dator

41,99 € exkl. moms
52,49 € inkl. moms

Tillbehör

Produktsupport

Vanliga frågor

Before You Buy

Unfortunately no, this device has an intended source and an intended destination.  Refer to the title of the webpage for this order.

When you convert video from a source that uses DisplayPort or Mini DisplayPort to DVI or HDMI (for example, a computer to a monitor), you will need to consider the difference between passive and active adapters.

If the source supports dual-mode DisplayPort (also known as DP++), then you can use a passive adapter because the source can perform the conversion. If the source does not support DP++, then you need to use an active converter, which includes additional chips to perform the conversion.

Thunderbolt ports support DP++ natively. To run multiple monitors from the same computer, refer to the Active Adapters section below.

Passive Adapters

Passive adapters are less expensive since they do not need to include additional chips. A quick way to check whether you can use a passive adapter is to see if the DisplayPort or Mini DisplayPort source has the DP++ symbol above it. The symbol is a D with a P inside of it, with two + signs to the left, one on top of the other.

Active Adapters

Active adapters use additional chips to make the conversion inside the adapter, regardless of whether the source supports DP++. This means that active adapters are more expensive than passive adapters.

If you want to use multiple monitors with the same computer, you should use an active adapter because some video cards cannot run the maximum number of monitors while using DP++. This is especially true if the computer has more than one DisplayPort or Mini DisplayPort connection. Check with your video card manufacturer to confirm which type of adapter you need for the setup that you would like to run.

Note: You should use passive adapters with StarTech.com MST hubs, except when you are converting from DisplayPort to VGA, since that type of conversion requires active adapters.  For more information on using adapters with StarTech.com MST hubs, refer to the following FAQ: http://www.startech.com/faq/mst_hubs_passive_vs_active_adapters.

Surface Dock

If you experience issues when you connect passive video signal adapters to the Surface Dock, Microsoft recommends that you use active video signal converters instead. StarTech.com offers an active video signal converter for DVI monitors (MDP2DVIS) and for HDMI monitors (MDP2HD4KS).

Note: This issue does not apply to the Surface Pro 3 Docking Station.

Installation

This device is plug and play. It does not use any drivers, and does not require any setup tasks other than plugging in the source (for example, a computer) and the destination (for example, a monitor).

Problemsökning

When you troubleshoot issues with a video adapter, there are some quick tests that you can complete to rule out potential problems. You can test to make sure that the following components are working correctly and are not the source of the issue:

  • Video cables

  • Video adapter

  • Video source (such as a DVD player or computer)

  • Video destination (such as a monitor or projector)

To test your setup components, try the following:

  • Use the cable, video adapter, video source, and video destination in another setup to see if the problem is with the components or the setup.

  • Use a different cable, video adapter, video source, and video destination in your setup to see if the problem persists. Ideally, you should test a component that you know works in another setup.

When you test your cables, it is recommended that you do the following:

  • Test each cable individually.

  • Use short cables when you are testing.

When you test the video source and video destination, it is recommended that you do the following:

  • Remove the video adapter from your setup and test to make sure that the video source and video destination work together without the video adapter.

  • Test to make sure that the video source and video destination work together at the resolution that you want to use.

Note: In order for your setup to work properly, the video source, adapter, and destination all need to support the resolution that you are using.

Try the following:

  1. Check that the monitor’s video port works with another source.
  2. Check that the cables between the source and the destination work with other equipment.
  3. Check whether the video adapter works with another source and another destination.

The error “Out of Range” normally means that the resolution being output by the computer is not compatible with the display. Try lowering the resolution to see if that helps resolve the issue.  You may need to connect another monitor or restart the computer or source to accomplish this.

If a DisplayPort converter with audio is not passing sound from the source to the destination, complete the following:

  1. Make sure that the DisplayPort connection on the video card is the default audio playback device.
  2. Make sure that the video card has the DisplayPort audio codec installed. If not, visit the video card manufacturer's website to find out how to update the video card driver.