StarTech.com

Aktiv Mini DisplayPort till Dual Link DVI-adapter – USB-driven

Anslut en videokälla med Mini DisplayPort till en DVI-D-skärm

Produkt ID: MDP2DVID

  • Maximal upplösning på upp till 2560x1600 med DVI Dual-Link
  • Stöder 1920x1080 med enkellänkade skärmar
  • Stöder alla DVI-D-skärmar, inklusive TV-apparater och Apple Cinema Display HD.
Visa mer
  • Strömförses från en enda USB 2.0-port
  • Enkel plug-and-play-installation, inga program behövs
154,99 € EUR exkl. moms
193,74 € EUR inkl. moms

Överblick

MDP2DVID adaptern för anslutning mellan Mini DisplayPort och DVI-D Dual-Link låter dig ansluta en videokälla med DisplayPort (Macbook, Macbook Pro, Macbook Air m.m.) till en DVI-D-skärm, inklusive TV-apparater och Apple Cinema Display HD och du slipper kostnaden av att uppgradera till en skärm med Mini DisplayPort.

Mini DisplayPort-adaptern ger en aktiv konvertering som strömförses från en enda USB-port och kan hantera fulla dual-link-upplösningar (upp till 2560x1600). Använd för att spegla skärmen på en annan, eller utöka skrivbordet för att få större arbetsyta.

Täcks av StarTech.coms 2-årsgaranti och gratis livstidsgaranti på teknisk support.

Fördelarna med StarTech.com

  • Aktiv konvertering tillåter full Dual-Link DVI-upplösning (2560x1600)
  • USB-driven användning innebär att inga vägguttag eller otympliga strömadaptrar behövs

Användning

Den är perfekt för digitala underhållningscentra, hemmakontor, konferensrum för företag och visningar på mässor

Behåll din befintliga DVI-skärm och använd den med din nya Mini DisplayPort-enhet

Perfekt för stora skärmar som använder höga DVI-upplösningar med Dual-Link-konnektivitet

DVI-bildskärmen är perfekt för att användas som en andra bildskärm

Tekniska specifikationer

Information om garanti
Garanti 2 Years
Hårdvara
Active or Passive Adapter Aktiv
Adapterstil Adaptrar
Audio Nej
AV-ingång DisplayPort
AV-utgång DVI
Industristandarder DisplayPort 1.1a
Prestanda
Maximal digital upplösning Dual Link: 2560x1600
Single Link: 1920x1200
Stödda upplösningar 2560x1600 @ 60Hz
1920x1200 @ 120Hz
1920x1080 @ 120Hz
Kontakt(er)
Connector A 1 - Mini-DisplayPort (20-stifts) Hane
1 - USB Type-A (4-stifts) USB 2.0 Hane
Connector B 1 - DVI-D (25-stifts) Hona
Miljö
Drifttemperatur 0°C to 70°C (32°F to 158°F)
Förvaringstemperatur -10°C to 80°C (14°F to 176°F)
Luftfuktighet 10% till 85 % RH (icke-kondenserande)
Utseende
Färg Svart
Kabellängd 610 mm [24 in]
Kabinettyp Av plast
Produktbredd 160 mm [6.3 in]
Produkthöjd 12 mm [0.5 in]
Produktlängd 208 mm [8.2 in]
Produktvikt 119 g [4.2 oz]
Förpackning
Fraktvikt (förpackning) 0.1 kg [0.3 lb]
Vad det är i lådan
Ingår i paketet 1 - Mini DisplayPort till DVI-adapter
1 - Instruktionsbok

Certifikat

Relaterade produkter

Mini DisplayPort till DVI-videoadapter
MDP2DVI
Mini DisplayPort till DVI-videoadapter

Anslut en DVI-skärm till en PC eller MAC med Mini DisplayPort®

16,99 € exkl. moms
21,24 € inkl. moms
DisplayPort® to DVI Video Adapter/Converter Cable - M/M
DP2DVIMM10
3 m DisplayPort till DVI-videoadapterkabel - M/M

Anslut din DVI-skärm till en DisplayPort-utrustad dator med en enda kabel

47,99 € exkl. moms
59,99 € inkl. moms
DisplayPort® to DVI Video Adapter/Converter Cable - M/M
DP2DVIMM6
1,8 m DisplayPort till DVI-video-konverterarkabel - M/M

Anslut din DVI-skärm till en DisplayPort-utrustad dator med en enda kabel

38,99 € exkl. moms
48,74 € inkl. moms
DisplayPort till HDMI-videoadapter
DP2HDMI
DisplayPort till HDMI-videoadapter

Anslut din HDMI®-bildskärm eller din HDTV till en DisplayPort®-utrustad dator

28,99 € exkl. moms
36,24 € inkl. moms
DisplayPort till VGA videoadapter
DP2VGA2
DisplayPort till VGA videoadapter

Anslut en VGA-skärm till en dator med DisplayPort

28,99 € exkl. moms
36,24 € inkl. moms
DisplayPort till DVI-videoadapter
DP2DVI2
DisplayPort till DVI-videoadapter

Anslut din DVI-skärm till en dator med en DisplayPort

15,99 € exkl. moms
19,99 € inkl. moms

Tillbehör

Produktsupport

Drivrutiner & hämtningsbara filer

Vanliga frågor

Before You Buy

Unfortunately no, this device has an intended source and an intended destination.  Refer to the title of the webpage for this order.

Digital Visual Interface (DVI) is a video display interface that can contain different types of signaling, based on the application. DVI cables and ports are created using different connector types to identify what application they are intended to be used in. The connector types are identified by the number of pins on the DVI connector. DVI comes in the following five different connector types: 

Single and Dual link DVI indicate the maximum resolution capabilities of the video source or video destination. The maximum resolutions are Single Link (1920 x 1080 @ 60Hz) and Dual Link (2560 x 1600 @ 60Hz).

Note: The maximum resolution of your video source and video destination are ultimately determined by the technical specifications of the devices. The connector type is not a definitive indicator of the maximum resolution.

DVI-A carries only analog (for example, VGA) with no digital component. DVI-D carries only digital video (for example, HDMI) with no analog component. DVI-I combines DVI-A and DVI-D connections to include both analog and digital components. A DVI-I port may be on either your video source or display, but whether or not a display carries either or both analog and digital sources depends on the technical specifications of your device.

When you convert video from a source that uses DisplayPort or Mini DisplayPort to DVI or HDMI (for example, a computer to a monitor), you will need to consider the difference between passive and active adapters.

If the source supports dual-mode DisplayPort (also known as DP++), then you can use a passive adapter because the source can perform the conversion. If the source does not support DP++, then you need to use an active converter, which includes additional chips to perform the conversion.

Thunderbolt ports support DP++ natively. To run multiple monitors from the same computer, refer to the Active Adapters section below.

Passive Adapters

Passive adapters are less expensive since they do not need to include additional chips. A quick way to check whether you can use a passive adapter is to see if the DisplayPort or Mini DisplayPort source has the DP++ symbol above it. The symbol is a D with a P inside of it, with two + signs to the left, one on top of the other.

Active Adapters

Active adapters use additional chips to make the conversion inside the adapter, regardless of whether the source supports DP++. This means that active adapters are more expensive than passive adapters.

If you want to use multiple monitors with the same computer, you should use an active adapter because some video cards cannot run the maximum number of monitors while using DP++. This is especially true if the computer has more than one DisplayPort or Mini DisplayPort connection. Check with your video card manufacturer to confirm which type of adapter you need for the setup that you would like to run.

Note: You should use passive adapters with StarTech.com MST hubs, except when you are converting from DisplayPort to VGA, since that type of conversion requires active adapters.  For more information on using adapters with StarTech.com MST hubs, refer to the following FAQ: http://www.startech.com/faq/mst_hubs_passive_vs_active_adapters.

Surface Dock

If you experience issues when you connect passive video signal adapters to the Surface Dock, Microsoft recommends that you use active video signal converters instead. StarTech.com offers an active video signal converter for DVI monitors (MDP2DVIS) and for HDMI monitors (MDP2HD4KS).

Note: This issue does not apply to the Surface Pro 3 Docking Station.

Installation

This device is plug and play. It does not use any drivers, and does not require any setup tasks other than plugging in the source (for example, a computer) and the destination (for example, a monitor).

Problemsökning

When you troubleshoot issues with a video adapter, there are some quick tests that you can complete to rule out potential problems. You can test to make sure that the following components are working correctly and are not the source of the issue:

  • Video cables

  • Video adapter

  • Video source (such as a DVD player or computer)

  • Video destination (such as a monitor or projector)

To test your setup components, try the following:

  • Use the cable, video adapter, video source, and video destination in another setup to see if the problem is with the components or the setup.

  • Use a different cable, video adapter, video source, and video destination in your setup to see if the problem persists. Ideally, you should test a component that you know works in another setup.

When you test your cables, it is recommended that you do the following:

  • Test each cable individually.

  • Use short cables when you are testing.

When you test the video source and video destination, it is recommended that you do the following:

  • Remove the video adapter from your setup and test to make sure that the video source and video destination work together without the video adapter.

  • Test to make sure that the video source and video destination work together at the resolution that you want to use.

Note: In order for your setup to work properly, the video source, adapter, and destination all need to support the resolution that you are using.

Try the following:

  1. Check that the monitor’s video port works with another source.
  2. Check that the cables between the source and the destination work with other equipment.
  3. Check whether the video adapter works with another source and another destination.

The error “Out of Range” normally means that the resolution being output by the computer is not compatible with the display. Try lowering the resolution to see if that helps resolve the issue.  You may need to connect another monitor or restart the computer or source to accomplish this.