StarTech.com

1,8 m Mini DisplayPort till VGA-kabel – M/M

Anslut din VGA-skärm till en Mini DisplayPort-kompatibel dator med en enda kabel

Produkt ID: MDP2VGAMM6

  • Allt-i-1-kabeldesign
  • Stödjer upplösningar upp till 1920x1200 och HDTV-upplösningar upp till 1080p
  • Ingen programvara eller extra drivrutiner behövs
  • Kompatibel med Intel® Thunderbolt™
46,99 € EUR exkl. moms
58,74 € EUR inkl. moms

Överblick

MDP2VGAMM6 1,8 m lång Mini DisplayPort till VGA-kabeln är en kostnadseffektiv Mini DisplayPort till VGA-länk som gör att du kan ansluta en VGA-skärm till en PC eller Mac® med ett Mini DisplayPort-uttag – och du slipper kostnaden för att uppgradera till en kompatibel skärm.

Denna lättanvända allt-i-ett Mini DisplayPort-/VGA-kabel behöver inga extra konverterare eller adaptrar och inga drivrutiner eller program krävs för installationen.

Kompatibel med Intel® Thunderbolt™ vid anslutning direkt till en DisplayPort över Thunderbolt™ I/O-port.

Täcks av StarTech.coms 2-årsgaranti.

Fördelarna med StarTech.com

  • Allt-i-ett-kabeldesign som är lätt att använda och hantera.
  • Upplösningsstöd upp till 1920x1200 och HDTV-upplösning upp till 1080p ger optimal tittarupplevelse
  • Inga programvaror eller extra drivrutiner behövs vilket gör det lätt och smidigt att koppla in din VGA-skärm

Användning

Behåll din nuvarande VGA-skärm och använd Mini DisplayPort till VGA-videokonverterarkablar

Använd en VGA-skärm till en DisplayPort-kompatibel MacBook® eller iMac®, med hjälp av Mini DisplayPort-videouttaget

Tekniska specifikationer

Information om garanti
Garanti 2 Years
Hårdvara
Active or Passive Adapter Aktiv
Adapterstil Kabeladapter
Audio Nej
Konverterartyp Kabeladaptrar
Prestanda
Maximal analog upplösning 1920x1200 / 1080p
Maximal kabellängd 1.8 m [6 ft]
Kontakt(er)
Connector A 1 - Mini-DisplayPort (20-stifts) Hane
Connector B 1 - VGA (15-stifts, High Density D-Sub) Hane
Miljö
Drifttemperatur 5°C to 35°C (41°F to 95°F)
Förvaringstemperatur 0°C to 70°C (32°F to 158°F)
Luftfuktighet 20~80% RH
Utseende
Färg Svart
Kabellängd 1.8 m [6 ft]
Produktlängd 1828.8 mm [72 in]
Produktvikt 90 g [3.2 oz]
Förpackning
Fraktvikt (förpackning) 90 g [3.2 oz]
Vad det är i lådan
Ingår i paketet 1 - 1,8 m Mini DisplayPort till VGA-kabel – M/M

Certifikat

Relaterade produkter

DisplayPort till VGA videoadapter
DP2VGA
DisplayPort till VGA videoadapter

Anslut din VGA-bildskärm till en DisplayPort-utrustad dator

41,99 € exkl. moms
52,49 € inkl. moms
DisplayPort till DVI videoadapter
DP2DVI
DisplayPort till DVI videoadapter

Anslut en DVI-bildskärm till DisplayPort-utgång med enkelt läge från din dator

21,99 € exkl. moms
27,49 € inkl. moms
DisplayPort till HDMI-videoadapter
DP2HDMI
DisplayPort till HDMI-videoadapter

Anslut din HDMI®-bildskärm eller din HDTV till en DisplayPort®-utrustad dator

28,99 € exkl. moms
36,24 € inkl. moms
Mini DisplayPort till VGA-videoadapter
MDP2VGA
Mini DisplayPort till VGA-videoadapter

Anslut din VGA-skärm till en dator med en Mini DisplayPort

35,99 € exkl. moms
44,99 € inkl. moms
Mini DisplayPort till DVI-videoadapter
MDP2DVI
Mini DisplayPort till DVI-videoadapter

Anslut en DVI-skärm till en PC eller MAC med Mini DisplayPort®

16,99 € exkl. moms
21,24 € inkl. moms

Produktsupport

Vanliga frågor

Before You Buy

Unfortunately no, this device has an intended source and an intended destination.  Refer to the title of the webpage for this order.

The DisplayPort to VGA adapter only converts from DisplayPort to VGA, which means that the DisplayPort connection must be the source and the VGA connection must be the destination.

Note: DisplayPort to VGA adapters are active, and can be used with any version of DisplayPort.

When you convert video from a source that uses DisplayPort or Mini DisplayPort to DVI or HDMI (for example, a computer to a monitor), you will need to consider the difference between passive and active adapters.

If the source supports dual-mode DisplayPort (also known as DP++), then you can use a passive adapter because the source can perform the conversion. If the source does not support DP++, then you need to use an active converter, which includes additional chips to perform the conversion.

Thunderbolt ports support DP++ natively. To run multiple monitors from the same computer, refer to the Active Adapters section below.

Passive Adapters

Passive adapters are less expensive since they do not need to include additional chips. A quick way to check whether you can use a passive adapter is to see if the DisplayPort or Mini DisplayPort source has the DP++ symbol above it. The symbol is a D with a P inside of it, with two + signs to the left, one on top of the other.

Active Adapters

Active adapters use additional chips to make the conversion inside the adapter, regardless of whether the source supports DP++. This means that active adapters are more expensive than passive adapters.

If you want to use multiple monitors with the same computer, you should use an active adapter because some video cards cannot run the maximum number of monitors while using DP++. This is especially true if the computer has more than one DisplayPort or Mini DisplayPort connection. Check with your video card manufacturer to confirm which type of adapter you need for the setup that you would like to run.

Note: You should use passive adapters with StarTech.com MST hubs, except when you are converting from DisplayPort to VGA, since that type of conversion requires active adapters.  For more information on using adapters with StarTech.com MST hubs, refer to the following FAQ: http://www.startech.com/faq/mst_hubs_passive_vs_active_adapters.

Surface Dock

If you experience issues when you connect passive video signal adapters to the Surface Dock, Microsoft recommends that you use active video signal converters instead. StarTech.com offers an active video signal converter for DVI monitors (MDP2DVIS) and for HDMI monitors (MDP2HD4KS).

Note: This issue does not apply to the Surface Pro 3 Docking Station.

Installation

This device is plug and play. It does not use any drivers, and does not require any setup tasks other than plugging in the source (for example, a computer) and the destination (for example, a monitor).

Problemsökning

When you troubleshoot issues with a video adapter, there are some quick tests that you can complete to rule out potential problems. You can test to make sure that the following components are working correctly and are not the source of the issue:

  • Video cables

  • Video adapter

  • Video source (such as a DVD player or computer)

  • Video destination (such as a monitor or projector)

To test your setup components, try the following:

  • Use the cable, video adapter, video source, and video destination in another setup to see if the problem is with the components or the setup.

  • Use a different cable, video adapter, video source, and video destination in your setup to see if the problem persists. Ideally, you should test a component that you know works in another setup.

When you test your cables, it is recommended that you do the following:

  • Test each cable individually.

  • Use short cables when you are testing.

When you test the video source and video destination, it is recommended that you do the following:

  • Remove the video adapter from your setup and test to make sure that the video source and video destination work together without the video adapter.

  • Test to make sure that the video source and video destination work together at the resolution that you want to use.

Note: In order for your setup to work properly, the video source, adapter, and destination all need to support the resolution that you are using.

Try the following:

  1. Check that the monitor’s video port works with another source.
  2. Check that the cables between the source and the destination work with other equipment.
  3. Check whether the video adapter works with another source and another destination.

The error “Out of Range” normally means that the resolution being output by the computer is not compatible with the display. Try lowering the resolution to see if that helps resolve the issue.  You may need to connect another monitor or restart the computer or source to accomplish this.

This is likely a High-bandwidth Digital Content Protection (HDCP) issue. If you are converting a video signal from a device that can play copyright-protected content, HDCP will block the conversion to an analog signal (for example, VGA) or to any video capture cards.

You will likely run into this issue when you use devices like Blu-ray players, DVD players, and certain gaming consoles. For more information on HDCP and gaming consoles, refer to the following FAQ: https://www.startech.com/faq/video_capture_cards_video_game_console_compatibility.

Some video cards also output an HDCP signal full time. In this case there should be an option for your video card to disable this feature. You might need to contact the manufacturer of your video card for more information.

Adhering to HDCP is required for converting all digital signals to analog signals or to video capture cards. Unfortunately, there is nothing you can do in these situations other than convert to a digital display.