Are you in the United States?
Visit our U.S.A. & International site for relevant pricing, distribution and product availability information.
Go to StarTech.com4K HDMI video-splitter med 2 portar – 1x2 HDMI-splitter – Strömförses via USB eller strömadapter – 4K 30 Hz
Splitta en HDMI audio/video-källa till två separata HDMI-skärmar med stöd för HDMI 4K och ström genom en närliggande USB-port.
Produkt ID: ST122HD4KU
- Stöder Ultra HD-videoupplösningar på upp till 4K @ 30 Hz
- USB-driven, valfri strömadapter medföljer
- Inbyggd HDMI-källkabel
- Supports 3D video
- Stöd för 7,1 surroundljud
- 2x HDMI-uttag
- Liten storlek
Inte tillgängligt
Kan finnas hos partners
Från en partner
Support
Överblick
ST122HD4KU video-splittern med 2 portar stöder Ultra HD (4K) för att garantera enastående bildkvalitet, fyra gånger högre upplösning än HD i 1080p, och kan samtidigt dela en 4K HDMI-videokälla mellan två HDMI-skärmar.
4K-splittern är bakåtkompatibel med tidigare HDMI-versioner och har stöd för enheter med HDMI-videoupplösning i 1080p/720p som till exempel datorer, Blu-ray-spelare och digitalboxar. Även om du inte behöver 4K-video idag garanterar video-splittern att du är redo att ta dig an morgondagens skärmteknik och fortfarande jobba med de skärmar som du redan har. Dessutom stöder splittern 3D så att du kan använda splittern med din stereoskopiska 3D-videokälla på aktiva eller passiva 3D-skärmar.
För en problemfri installation kan du strömförse HDMI-splittern med den medföljande USB-kabeln eller strömadaptern beroende på vad som är mest praktiskt för dig. Dessutom har splittern en inbyggd HDMI-källkabel som låter dig ansluta splittern direkt till HDMI-källan utan att behöva köpa extra kablar.
ST122HD4KU täcks av StarTech.coms 2-årsgaranti och gratis livstidsgaranti på teknisk support.
Fördelarna med StarTech.com
- Problemfri installation med ditt val av USB eller strömadapter och inbyggd HDMI-källkabel
- Dra nytta av den nyaste videotekniken med kvaliteten från 4K-videoenheter
Användning
Visa en 4K HDMI-signal på två olika HDMI-skärmar
Använd för att visa upp 4K-skärmar genom att sända samma videokälla på flera skärmar
Visa företagsinformation eller reklam på flera skärmar i köpcentrum
Använd för att visa börsinformation eller kampanjinformation i finansinstitut
Visa samma information på flera skärmar i väntrum inom sjukvården
Tekniska specifikationer
Produktnummer | ||
---|---|---|
Ingram Micro Sweden | V933218 | |
UPC Code | 065030858465 |
Information om garanti | ||
---|---|---|
Garanti | 2 Years | |
Hårdvara | ||
Audio | Ja | |
Industristandarder | HDMI 1.4 | |
Portar | 2 | |
Utsignal | HDMI | |
Prestanda | ||
Audio-specifikationer | 7.1 surroundljud | |
Maximal digital upplösning | 4K @ 30 Hz | |
Stöd för widescreen | Ja | |
Stödda upplösningar | 3840x2160 (4K) 2560x1600 1920x1200 1920x1080 (1080p) 1280x720 (720p) |
|
Kontakt(er) | ||
Connector A | 1 - HDMI (19-stifts) Hane | |
Connector B | 2 - HDMI (19-stifts) Hona | |
Ström | ||
Inspänning | 100 ~ 240 AC | |
Inström | 0.5 A | |
Power Source | AC-adapter medföljer | |
Strömförbrukning | 10 | |
Utspänning | 5 DC | |
Utström | 2 A | |
Utseende | ||
Färg | Svart | |
Produktbredd | 53 mm [2.1 in] | |
Produkthöjd | 18 mm [0.7 in] | |
Produktlängd | 615 mm [24.2 in] | |
Produktvikt | 235 g [8.3 oz] | |
Förpackning | ||
Fraktvikt (förpackning) | 0.3 kg [0.8 lb] | |
Vad det är i lådan | ||
Ingår i paketet | 1 - HDMI-delare | |
1 - Universell strömadapter (NA/EU/UK/AU) | ||
1 - USB-strömkabel | ||
1 - Instruktionsbok |
Relaterade produkter
4K HDMI-video-splitter med 2 portar – 1x2 HDMI-splitter med hölje i solitt aluminium – 4K @ 30 Hz
Dela en HDMI audio/video-källa på två separata HDMI-skärmar samtidigt, med stöd för upplösningar på upp till 4K
HDMI-splitter och signalförstärkare med 2 portar
Dela upp en HDMI®-audio- och -videosignal till två skärmar samtidigt
4K HDMI-splitter - HDMI-splitter 1 in 2 ut - 2 portar - 4K 60 Hz
Anslut din HDMI audio/video-källa till två skärmar samtidigt med hjälp av denna HDMI-splitterbox med stöd för 4K-upplösning vid 60 Hz
2 Port HDMI Video Splitter with Audio - USB Powered
Split an HDMI® source with accompanying audio to 2 displays
HDMI-splitter och signalförstärkare med 4 portar
Dela upp en HDMI®-audio- och -videosignal till fyra skärmar samtidigt
4K HDMI-video-splitter med 4 portar – 1x4 HDMI-splitter med hölje i solitt aluminium – 4K @ 30 Hz
Dela en HDMI audio/video-källa på två separata HDMI-skärmar samtidigt, med stöd för upplösningar på upp till 4K
4K HDMI-splitter - HDMI-splitter 1 in 4 ut - 4 portar - 4K 60 Hz
Connect your HDMI audio/video source to four displays simultaneously, using this HDMI splitter box that supports 4K at 60Hz resolution
8-port HDMI splitter and signal amplifier
Split an HDMI® audio and video signal to eight displays simultaneously
Tillbehör
6 ft HDMI to DVI-D Cable - M/M
Connect an HDMI®-enabled output device to a DVI-D display, or a DVI-D output device to an HDMI-capable display
3 m HDMI till DVI-D-kabel - M/M
Anslut en HDMI®-kompatibel utdataenhet till en DVI-D-skärm eller en DVI-D-utdataenhet till en HDMI-kompatibel skärm
Produktsupport
Drivrutiner & hämtningsbara filer
Manual(er):
-
ST122HD4KU manual.pdf
English
Compliance Letter(s):
Specifikation(er)
- ST122HD4KU_Datasheet-SV.pdf
Svenska
Vanliga frågor
Before You Buy
This device outputs HDMI video signals. If you have a display or video destination that uses another type of video connection, there are ways that you can convert the video signal or connection. These options are outlined below and organized by the target connection.
HDCP
When you consider whether to convert an HDMI video signal to another connection type, it is important to know if the media that is being converted from the HDMI video connection is protected by High-bandwidth Digital Content Protection (HDCP). If the media is protected by HDCP, you cannot convert to analog video connections because they do not support HDCP. You may experience this issue when you use devices like Blu-ray players, DVD players, and certain gaming consoles.
Target connection | Conversion |
VGA | HDMI to VGA: https://www.startech.com/AV/Converters/Video/?filter_AVINPUT=HDMI&filter_AVOUTPUT=VGA. |
DVI |
HDMI to DVI: https://www.startech.com/Cables/Audio-Video/HDMI/HDMI-to-DVI/. |
DisplayPort | HDMI to DisplayPort: https://www.startech.com/AV/Converters/Video/?filter_AVINPUT=HDMI&filter_AVOUTPUT=DisplayPort. |
Copy Link
Was this information helpful? Ja Nej
This device has an HDMI input port. If you have a video source that uses another video connection, there are options available to convert the video signal or connection. These options will be outlined below for each video source connection.
Source Connection |
Conversion |
VGA |
VGA to HDMI: https://www.startech.com/AV/Converters/Video/?filter_AVINPUT=VGA&filter_AVOUTPUT=HDMI. |
DVI |
DVI to HDMI video converters: https://www.startech.com/Cables/Audio-Video/Video-Adapter/HDMI-Cable-Adapters/. DVI to HDMI video cables: https://www.startech.com/Cables/Audio-Video/HDMI/HDMI-to-DVI/. |
DisplayPort |
DisplayPort to HDMI passive converters: https://www.startech.com/AV/Displayport-Converters/DP-HDMI/?filter_CONVERTTYPE=Passive. DisplayPort to HDMI active converters: https://www.startech.com/AV/Displayport-Converters/DP-HDMI/?filter_CONVERTTYPE=Active. |
DisplayPort Passive and Active Conversions
The converter that you require depends on the type of DisplayPort video source that you are using. For more information about converting DisplayPort video signals, refer to the following FAQ: https://www.startech.com/faq/DisplayPort_Converter_DP_Multi_Mode.
Copy Link
Was this information helpful? Ja Nej
Problemsökning
When you troubleshoot issues with a video splitter, there are some quick tests that you can complete to rule out potential problems. You can test to make sure that the following components are working correctly and are not the source of the issue:
-
Video cables
-
Video splitter
-
Video source (such as a DVD player or computer)
-
Video destination (such as a monitor or projector)
Note: When you are testing setup components, you should avoid using video adapters. For example, if you are converting a VGA source to HDMI for use with an HDMI splitter, you should use an HDMI source when you test the components.
To test your setup components, try the following:
-
Use the cable, video splitter, video source, and video destination in another setup to see if the problem is with the components or the setup.
-
Use a different cable, video splitter, video source, and video destination in your setup to see if the problem persists. Ideally, you should test a component that you know works in another setup.
When you test your cables, it is recommended that you do the following:
-
Test each cable individually.
-
Use short cables when you are testing.
When you test the video source and video destination, it is recommended that you do the following:
-
Remove the video splitter from your setup and test to make sure that the video source and video destination work together without the video splitter.
-
Test to make sure that the video source and video destination work together at the resolution that you want to use.
Note: In order for your setup to work properly, the video source, splitter, and destination all need to support the resolution that you are using.
Copy Link
Was this information helpful? Ja Nej
Video splitters take the output for monitor port 1 and mirror it to the remaining outputs. By default, the first output port is the master port that is mirrored to each additional monitor. Make sure that you use the first output port when you use the video splitter. The master port is labeled on the splitter boxes from StarTech.com. On the splitter cables from StarTech.com, the master port is the top port.
If you are having issues with a splitter interpreting the incorrect port as the master port, try the following:
-
Unplug all of the video connections.
-
If the splitter is powered, power cycle the splitter.
-
Plug in all of the video connections again.
-
Make sure that the first video connection plugged in is the one that you want to be the master port.
Copy Link
Was this information helpful? Ja Nej
You might encounter resolution issues when you use a video splitter. This can occur because the information and resolution on one display are being copied and sent to each of the additional displays. You should make sure that all of the displays that you are using can support the output resolution. For more information, refer to the following FAQ: https://www.startech.com/faq/video_splitters_correct_port_usage
Copy Link
Was this information helpful? Ja Nej
* Produkters utseende och specifikationer kan komma att ändras utan förvarning.