StarTech.com

3.5in Black USB 3.0 External SATA III Hard Drive Enclosure with UASP for SATA 6 Gbps – Portable External HDD

Turn a 3.5” SATA Hard Drive into a UASP-supported USB 3.0 External Hard Drive

Produkt ID: S3510BMU33

  • Compliant with USB Attached SCSI Protocol (UASP) Transport Specifications
  • Light-weight and durable aluminum enclosure
  • SuperSpeed USB 3.0 compliant host interface supporting data transfer rates up to 5Gbps
Visa mer
  • High Speed USB 2.0 compliant host interface, with transfer rates up to 480Mbps
  • Power/Activity LED indicator
  • Compatible with SATA revision I/II/III (1.5/3.0/6.0 Gbps) drives
  • Plug-and-Play and Hot-Swap compatible
  • Vented Drive Tray
57,99 € EUR exkl. moms
72,49 € EUR inkl. moms

Överblick

The S3510BMU33 Black USB 3.0 Hard Drive Enclosure with UASP lets you connect a 3.5in SATA III hard drive (HDD) through an available USB port. The enclosure delivers optimal performance with a USB 3.0 connection, but is backward compatible with USB 2.0/1.1 host connections as well.

Enhanced with UASP (USB Attached SCSI Protocol), this 3.5" SATA III enclosure performs up to 70% faster than conventional USB 3.0 when paired with a UASP-enabled host controller. Using a more efficient protocol than the traditional USB BOT (Bulk-Only Transport), UASP reduces latency, significantly increasing transfer speeds and reducing processor usage to utilize the full potential of your SATA III hard drives. See our UASP testing results below for further details.

With support for SATA I/II/III, and large capacity drives (tested up to 4TB) this HDD enclosure is compatible with virtually any 3.5in SATA hard drive, and can greatly increase the storage/backup capabilities of your computer.

The USB 3.0/SATA III enclosure features high quality aluminum construction, ensuring durability.

Backed by a StarTech.com 2-year warranty and free lifetime technical support.

Improved Performance with UASP

UASP is supported in Windows 8, Mac OSX (10.8 or above), and Linux. In testing UASP performs with a 70% faster read speed and 40% faster write speed over traditional USB 3.0 at peak performance.

UASP Speed Diagram

At the same peak in testing UASP also shows an 80% reduction in required processor resources.

UASP Speed Diagram

Testing results were obtained using an Intel® Ivy Bridge system, a UASP enabled StarTech.com enclosure, and a SATA III solid state drive.

 

Fördelarna med StarTech.com

  • 70% Faster than traditional USB 3.0, with UASP Transfer Protocol
  • Maximum durability, with aluminum housing

Användning

Take advantage of new laptops and desktops with USB 3.0 (UASP) connectivity

Turn a high capacity SATA hard drive into portable, external storage

Create a fast, portable external storage solution for desktops, laptops or netbooks

Upgrade from a USB 2.0 drive enclosure to faster USB 3.0

Add-on extra storage to almost any USB enabled computer system

Backup important data to an external storage device

Share large files between computers quickly and securely without a network

Retrieve data from an old SATA drive, or turn the unused drive into additional external storage space

Tekniska specifikationer

Information om garanti
Garanti 2 Years
Hårdvara
Antal enheter 1
Chipset-ID ASMedia - ASM1053 - 6G
Enhetsinstallation Fixerad
Enhetsstorlek 3.5in
Enhetstyp SATA
Fläkt(ar) Nej
Gränssnitt USB 3.0
Prestanda
Maximal enhetskapacitet Currently tested with up to 4TB 7200 RPM hard drives
RAID Nej
Typ och hastighet USB 3.0 - 5 Gbit/s
SATA III (6 Gbps)
UASP-stöd Ja
Kontakt(er)
Enhetskontakter 1 - SATA data- & ström-kombo (7+15-stifts) Hona
Värdkontakter 1 - USB Type-B (9-stifts) USB 3.0 Hona
Mjukvara
OS-kompatibilitet OS independent; No software or drivers required
Särskilda anmärkningar/krav
System- och kabelkrav Available USB port
Indikatorer
LED-indikatorer 1 - Power & Activity
Ström
Inspänning 100 ~ 240 AC
Inström 0.6 A
Kontakttyp M
Polaritet på mittpol Positiv
Power Source AC-adapter medföljer
Strömförbrukning 24
Utspänning 12 DC
Utström 2 A
Miljö
Drifttemperatur 0°C to 40°C (32°F to 104°F)
Förvaringstemperatur -10°C to 65°C (14°F to 149°F)
Luftfuktighet Operation Humidity: 10% ~ 90% RH
Storage Humidity: 5% ~ 95% RH
Utseende
Färg Svart
Kabinettyp Aluminium och plast
Produktbredd 31.4 mm [1.2 in]
Produkthöjd 115.4 mm [4.5 in]
Produktlängd 191.5 mm [7.5 in]
Produktvikt 317 g [11.2 oz]
Förpackning
Fraktvikt (förpackning) 0.8 kg [1.7 lb]
Vad det är i lådan
Ingår i paketet 1 - 3.5” USB 3.0 SATA III HDD Enclosure
1 - Screw Kit
1 - Universal Power Adapter (NA / UK / EU)
1 - USB 3.0 Cable
1 - HDD Stand
1 - Product Manual

Kompatibilitet

Se alla kompatibla operativsystem
OS independent; No software or drivers required

Certifikat

Relaterade produkter

2.5in USB 3.0 External SATA III SSD Hard Drive Enclosure with UASP – Portable External HDD
S2510BPU33
2.5in USB 3.0 External SATA III SSD Hard Drive Enclosure with UASP – Portable External HDD

Turn a 2.5” SATA Hard Drive or Solid State Drive into a UASP supported USB 3.0 External Hard Drive

27,99 € exkl. moms
34,99 € inkl. moms
Hard Drive Enclosure for 3.5in SATA Drives - USB 3.0
S3510SMU33
Hard Drive Enclosure for 3.5in SATA Drives - USB 3.0

Turn a 3.5” SATA Hard Drive into a UASP-supported USB 3.0 External Hard Drive

52,99 € exkl. moms
66,24 € inkl. moms
2,5
S2510BMU33
2,5" USB 3.0 extern SATA III SSD hårddiskkabinett i aluminium med UASP för SATA 6 Gbps - Bärbar extern HDD

Gör om en 2,5" SATA-hårddisk eller solid state-enhet till en USB 3.0 extern-hårddisk med stöd för UASP

28,99 € exkl. moms
36,24 € inkl. moms
USB 3.0 till SATA-hårddisk dockningsstation för 2,5/3,5 HDD
SATDOCKU3S
USB 3.0 till SATA-hårddisk dockningsstation för 2,5/3,5 HDD

Möjliggör snabb växlingsbar åtkomst till din 2,5 tums- eller 3,5 tums-hårddisk via USB 3.0

56,99 € exkl. moms
71,24 € inkl. moms

Tillbehör

Produktsupport

Drivrutiner & hämtningsbara filer

Vanliga frågor

Before You Buy

To determine if your hard drive will work in this enclosure, on the product page, click the Technical Specifications tab, and do the following:

  • Make sure that the enclosure supports the storage size of your hard drive. If the storage size of your hard drive is larger than what the enclosure was tested with, the hard drive will likely still work with the enclosure.
  • Confirm that your hard drive uses the same interface type as the enclosure. For example, IDE, SATA, or M.2.
  • Make sure that the enclosure supports the physical size of your hard drive, such as 2.5 inches or 3.5 inches.
  • Make sure that the enclosure supports the height of your hard drive. For example, 9 mm or 15 mm.
  • Verify that the power consumption of your hard drive doesn’t exceed the power output of the enclosure. If you’re using multiple hard drives, make sure that the combined power consumption of all of the hard drives doesn’t exceed the power output of the enclosure.

Hur man

To confirm that the Mac OS detects your USB device, complete the following:

  1. Click the Apple icon.
  2. Click About This Mac.
  3. Click More Info or System Report.
  4. Under the appropriate heading, confirm that your USB device is listed and that there isn't an error. For example, a network card would be under Ethernet Cards.

You may need to refresh the System Information page after you plug in your device.  To do so, press Command R with the System Information page open.

Your USB device is listed according to the name of the chipset. To determine the name of the chipset of your USB device, navigate to www.StarTech.com and look on the Technical Specifications tab for your product.

Problemsökning

When you troubleshoot issues with a hard drive enclosure, there are some quick tests that you can complete to rule out potential problems. You can test to make sure that the following components are working correctly and are not the source of the issue:

  • Cables
  • Hard drives
  • Hard drive enclosure

To test your setup components, try the following:

  • Use the cables, hard drives, and hard drive enclosure in another setup to see if the problem is with the components or the setup.
  • Use a different cable, hard drive, and hard drive enclosure in your setup to see if the problem persists. Ideally, you should test a component that you know works in another setup.

When you test the hard drive and hard drive enclosure, it is recommended that you do the following:

  • To check Disk Management, press the Windows key + R, type diskmgmt.msc, and press Enter. Check to see if your hard drive is listed.
  • If the hard drive is listed with unallocated space, the hard drive needs to be reformatted. Right-click unallocated and click New Simple Volume. Follow the on-screen instructions to complete the reformatting.​

Note: Formatting a hard drive erases all of the data on it. Make sure that you back up all of your data before you reformat the hard drive.​

  • If the hard drive is listed as healthy but does not have a drive letter, for example, C:, right-click healthy and click Change Drive Letter and Paths. Click Add, assign a drive letter, and click OK.

Note: A formatted hard drive will not show up in Computer or My Computer until it has a drive letter assigned to it.