Produktsökning

3.5in Black USB 3.0 External SATA III Hard Drive Enclosure with UASP for SATA 6 Gbps – Portable External HDD

Turn a 3.5” SATA Hard Drive into a UASP-supported USB 3.0 External Hard Drive

Produkt ID: S3510BMU33

  • Compliant with USB Attached SCSI Protocol (UASP) Transport Specifications
  • Light-weight and durable aluminum enclosure
  • SuperSpeed USB 3.0 compliant host interface supporting data transfer rates up to 5Gbps
Ditt pris
€63,99 EUR excl. VAT
€79,99 EUR incl. VAT

The S3510BMU33 Black USB 3.0 Hard Drive Enclosure with UASP lets you connect a 3.5in SATA III hard drive (HDD) through an available USB port. The enclosure delivers optimal performance with a USB 3.0 connection, but is backward compatible with USB 2.0/1.1 host connections as well.

Enhanced with UASP (USB Attached SCSI Protocol), this 3.5" SATA III enclosure performs up to 70% faster than conventional USB 3.0 when paired with a UASP-enabled host controller. Using a more efficient protocol than the traditional USB BOT (Bulk-Only Transport), UASP reduces latency, significantly increasing transfer speeds and reducing processor usage to utilize the full potential of your SATA III hard drives. See our UASP testing results below for further details.

With support for SATA I/II/III, and large capacity drives (tested up to 4TB) this HDD enclosure is compatible with virtually any 3.5in SATA hard drive, and can greatly increase the storage/backup capabilities of your computer.

The USB 3.0/SATA III enclosure features high quality aluminum construction, ensuring durability.

Backed by a StarTech.com 2-year warranty and free lifetime technical support.

Improved Performance with UASP

UASP is supported in Windows 8, Mac OSX (10.8 or above), and Linux. In testing UASP performs with a 70% faster read speed and 40% faster write speed over traditional USB 3.0 at peak performance.

UASP Speed Diagram

At the same peak in testing UASP also shows an 80% reduction in required processor resources.

UASP Speed Diagram

Testing results were obtained using an Intel® Ivy Bridge system, a UASP enabled StarTech.com enclosure, and a SATA III solid state drive.

 

Användning

  • Take advantage of new laptops and desktops with USB 3.0 (UASP) connectivity
  • Turn a high capacity SATA hard drive into portable, external storage
  • Create a fast, portable external storage solution for desktops, laptops or netbooks
  • Upgrade from a USB 2.0 drive enclosure to faster USB 3.0
  • Add-on extra storage to almost any USB enabled computer system
  • Backup important data to an external storage device
  • Share large files between computers quickly and securely without a network
  • Retrieve data from an old SATA drive, or turn the unused drive into additional external storage space

Fördelarna med StarTech.com

  • 70% Faster than traditional USB 3.0, with UASP Transfer Protocol
  • Maximum durability, with aluminum housing

Partnernummer

  • Ingram Micro Sweden V932847
  • ALSO Sweden 000000000002776171
  • UPC 065030851732

Kompatibilitet

Specifikationer

Warranty Information Warranty 2 Years
Förpackning Package Height 10,6 cm [4,2 in]
Package Length 13,4 cm [5,3 in]
Fraktvikt (förpackning) 787 g [27,8 oz]
Package Width 22,5 cm [8,9 in]
Hårdvara Gränssnitt USB 3.0
Antal enheter 1
Enhetsstorlek 3.5in
Enhetstyp SATA
Enhetsinstallation Fixerad
Fläkt(ar) Nej
Chipset-ID ASMedia - ASM1053 - 6G
Indikatorer 1 - LED-indikatorer Power & Activity
Kontakt(er) 1 - Enhetskontakter SATA data- & ström-kombo (7+15-stifts)
1 - Värdkontakter USB Type-B (9-stifts) USB 3.0
Miljö Drifttemperatur 0°C to 40°C (32°F to 104°F)
Förvaringstemperatur -10°C to 65°C (14°F to 149°F)
Luftfuktighet Operation Humidity: 10% ~ 90% RH
Storage Humidity: 5% ~ 95% RH
Mjukvara OS-kompatibilitet OS independent; No software or drivers required
Prestanda Typ och hastighet USB 3.0 - 5 Gbit/s
UASP-stöd Ja
Typ och hastighet SATA III (6 Gbps)
RAID Nej
Maximal enhetskapacitet Currently tested with up to 4TB 7200 RPM hard drives
Särskilda anmärkningar/krav System- och kabelkrav Available USB port
Ström Power Source AC-adapter medföljer
Inspänning 100 - 240 AC
Inström 0.6 A
Utspänning 12V DC
Utström 2 A
Polaritet på mittpol Positiv
Kontakttyp M
Strömförbrukning 24
Utseende Produktvikt 311 g [11,0 oz]
Färg Svart
Kabinettyp Aluminium och plast
Produktlängd 19,2 cm [7,5 in]
Produktbredd 31,4 mm [1,2 in]
Produkthöjd 11,5 cm [4,5 in]
Vad det är i lådan 1 - Ingår i paketet 3.5” USB 3.0 SATA III HDD Enclosure
Screw Kit
Universal Power Adapter (NA / UK / EU)
USB 3.0 Cable
HDD Stand
Product Manual

Tillbehör

Utgått
PEXUSB3S4

SuperSpeed USB 3.0 PCI Express-kort med 4 portar och UASP - SATA-ström

Lägg till fyra USB 3.0-portar till din stationära dator genom en PCI Express-utbyggnadskortplats

Ditt pris
€50,99 EUR excl. VAT
€63,74 EUR incl. VAT
MPEXUSB3S22B

2 Port SuperSpeed Mini PCI Express USB 3.0 Adapter Card w/ Bracket Kit and UASP Support

Add two USB 3.0 ports through a Mini PCI Express slot

Ditt pris
€77,99 EUR excl. VAT
€97,49 EUR incl. VAT
PCIUSB3S4

PCI-kortadapter med 4 USB 3.0-portar och SATA/SP4-ström

Lägg till 4 SuperSpeed USB 3.0-portar till datorn genom en PCI-kortplats

Ditt pris
€100,99 EUR excl. VAT
€126,24 EUR incl. VAT
Utgått
PEXUSB3S22

SuperSpeed USB 3.0 PCI Express-kort med 2 portar och UASP - SATA-ström

Lägg till 2 USB 2.0-portar till din stationära dator genom en PCI Express-kortplats

Ditt pris
€39,99 EUR excl. VAT
€49,99 EUR incl. VAT
Utgått
ECUSB3S2

2 Port ExpressCard SuperSpeed USB 3.0 Card Adapter with UASP Support

Add two USB 3.0 ports to your laptop through an ExpressCard slot

Ditt pris
€21,99 EUR excl. VAT
€27,49 EUR incl. VAT
Utgått
PEXUSB3S2

PCI Express SuperSpeed USB 3.0-kortadapter med 2 portar och UASP-stöd

Lägg till två USB 3.0-portar till din stationära dator genom en PCI Express-utbyggnadskortplats

Ditt pris
€34,99 EUR excl. VAT
€43,74 EUR incl. VAT
ECUSB3S254F

54 mm flush mount ExpressCard SuperSpeed USB 3.0-kortadapter med 2 portar

Lägg till två flush mount USB 3.0-portar till en ExpressCard-kompatibel bärbar dator

Ditt pris
€56,99 EUR excl. VAT
€71,24 EUR incl. VAT
Utgått
ECUSB3S1

1 Port Flush Mount ExpressCard SuperSpeed USB 3.0 Card Adapter with UASP Support

Flush mount a USB 3.0 ExpressCard adapter into a laptop ExpressCard slot

Ditt pris
€22,46 EUR excl. VAT
€28,08 EUR incl. VAT
PEXUSB3S11

PCI Express SuperSpeed USB 3.0-kort med 2 portar och UASP-stöd - 1 Intern, 1 extern

Lägg till en intern och en extern SuperSpeed USB 3.0 till din dator

Ditt pris
€49,99 EUR excl. VAT
€62,49 EUR incl. VAT
Utgått
PEXUSB3S400

PCI Express PCIe SuperSpeed USB 3.0-kontrollerkortadapter med 4 oberoende portar och UASP - SATA-ström

Lägg till 4 oberoende SuperSpeed USB 3.0-portar till datorn genom en PCI express-kortplats

Ditt pris
€138,99 EUR excl. VAT
€173,74 EUR incl. VAT
PCIUSB3S22

2 Port PCI SuperSpeed USB 3.0 Adapter Card with SATA Power

Add 2 SuperSpeed USB 3.0 ports to a computer through a PCI slot

Ditt pris
€77,99 EUR excl. VAT
€97,49 EUR incl. VAT
ECUSB3S11

1 Port Flush Mount ExpressCard SuperSpeed USB 3.0 Card Adapter with UASP Support

Add a USB 3.0 port connection that inserts flush into a laptop ExpressCard slot

Ditt pris
€35,99 EUR excl. VAT
€44,99 EUR incl. VAT
ECUSB3S22

2 Port ExpressCard SuperSpeed USB 3.0 Card Adapter with UASP Support

Add 2 USB 3.0 Ports to a Laptop through an ExpressCard Slot

Ditt pris
€43,99 EUR excl. VAT
€54,99 EUR incl. VAT
USB3CAB2M

2m (6 ft) Certified SuperSpeed USB 3.0 A to B Cable - M/M

Connect your USB 3.0 devices, with this high-quality USB 3.0 certified cable

Ditt pris
€16,99 EUR excl. VAT
€21,24 EUR incl. VAT
Utgått
USB3SAB2MRA

2m Black SuperSpeed USB 3.0 Cable - Right Angle A to B - M/M

Connect USB 3.0 devices, even in hard to reach areas and tight spaces

Ditt pris
€3,99 EUR excl. VAT
€4,99 EUR incl. VAT
USB3SAB1MRA

1m Black SuperSpeed USB 3.0 Cable - Right Angle A to B - M/M

Connect USB 3.0 devices, even in hard to reach areas and tight spaces

Ditt pris
€10,99 EUR excl. VAT
€13,74 EUR incl. VAT
Utgått
USB3SAB3MRA

3m Black SuperSpeed USB 3.0 Cable - Right Angle A to B - M/M

Connect USB 3.0 devices, even in hard to reach areas and tight spaces

Ditt pris
€10,99 EUR excl. VAT
€13,74 EUR incl. VAT
USB3SAB10

10 ft SuperSpeed USB 3.0 Cable A to B - M/M

Connect to your external devices and transfer data at 10x the speed of USB 2.0

Ditt pris
€11,99 EUR excl. VAT
€14,99 EUR incl. VAT
PEXUSB3S4V

PCI Express PCIe SuperSpeed USB 3.0-kontrollerkortadapter med 4 portar och UASP - SATA-ström

Lägg till 4 externa USB 3.0-portar till en dator i låg- eller standardprofil genom PCI express

Ditt pris
€63,99 EUR excl. VAT
€79,99 EUR incl. VAT
Utgått
USB3SAB3BK

3 ft Black SuperSpeed USB 3.0 Cable A to B - M/M

Connect to your external solutions and transfer data at 10x the speed of USB 2.0

Ditt pris
€6,99 EUR excl. VAT
€8,74 EUR incl. VAT
USB3CAB1M

1m (3ft) Certified SuperSpeed USB 3.0 A to B Cable - M/M

Connect your USB 3.0 devices with this high-quality USB 3.0 certified cable

Ditt pris
€13,99 EUR excl. VAT
€17,49 EUR incl. VAT
SVA12M2NEUA

DC-strömadapter - 12 V, 2 A

Byt ut din borttappade eller trasiga strömadapter

Ditt pris
€25,99 EUR excl. VAT
€32,49 EUR incl. VAT
SVA12M5NA

DC-strömadapter - 12 V, 5 A

Byt ut din borttappade eller trasiga strömadapter

Ditt pris
€65,99 EUR excl. VAT
€82,49 EUR incl. VAT

Drivers/Downloads

Prata med en rådgivare.

Vi är alltid redo att hjälpa dig med alla dina frågor.

Direktchatt (opens in new window)

Diagram:

Manual(er):

Datasheet

Produktsupport

Prata med en rådgivare.

Vi är alltid redo att hjälpa dig med alla dina frågor.

Direktchatt (opens in new window)

Vanliga frågor

Problemsökning

When you troubleshoot issues with a hard drive enclosure, there are some quick tests that you can complete to rule out potential problems. You can test to make sure that the following components are working correctly and are not the source of the issue:

  • Cables
  • Hard drives
  • Hard drive enclosure

To test your setup components, try the following:

  • Use the cables, hard drives, and hard drive enclosure in another setup to see if the problem is with the components or the setup.
  • Use a different cable, hard drive, and hard drive enclosure in your setup to see if the problem persists. Ideally, you should test a component that you know works in another setup.

When you test the hard drive and hard drive enclosure, it is recommended that you do the following:

  • To check Disk Management, press the Windows key + R, type diskmgmt.msc, and press Enter. Check to see if your hard drive is listed.
  • If the hard drive is listed with unallocated space, the hard drive needs to be reformatted. Right-click unallocated and click New Simple Volume. Follow the on-screen instructions to complete the reformatting.​

Note: Formatting a hard drive erases all of the data on it. Make sure that you back up all of your data before you reformat the hard drive.​

  • If the hard drive is listed as healthy but does not have a drive letter, for example, C:, right-click healthy and click Change Drive Letter and Paths. Click Add, assign a drive letter, and click OK.

Note: A formatted hard drive will not show up in Computer or My Computer until it has a drive letter assigned to it.

Hur man

To confirm that the Mac OS detects your USB device, complete the following:

  1. Click the Apple icon.
  2. Click About This Mac.
  3. Click More Info or System Report.
  4. Under the appropriate heading, confirm that your USB device is listed and that there isn't an error. For example, a network card would be under Ethernet Cards.

You may need to refresh the System Information page after you plug in your device.  To do so, press Command R with the System Information page open.

Your USB device is listed according to the name of the chipset. To determine the name of the chipset of your USB device, navigate to www.StarTech.com and look on the Technical Specifications tab for your product.

Before You Buy

To determine if your hard drive will work in this enclosure, on the product page, click the Technical Specifications tab, and do the following:

  • Make sure that the enclosure supports the storage size of your hard drive. If the storage size of your hard drive is larger than what the enclosure was tested with, the hard drive will likely still work with the enclosure.
  • Confirm that your hard drive uses the same interface type as the enclosure. For example, IDE, SATA, or M.2.
  • Make sure that the enclosure supports the physical size of your hard drive, such as 2.5 inches or 3.5 inches.
  • Make sure that the enclosure supports the height of your hard drive. For example, 9 mm or 15 mm.
  • Verify that the power consumption of your hard drive doesn’t exceed the power output of the enclosure. If you’re using multiple hard drives, make sure that the combined power consumption of all of the hard drives doesn’t exceed the power output of the enclosure.

Hard Drives

Windows 10 

Before you can access a new or formatted drive in your operating system, you need to initialize it first and then create a partition on the drive. A partition defines an area of the drive to use for storing data. The partition uses a file system (for example, ex-FAT, NTFS, and so on).

Initialize a drive

Note: You typically only need to initialize a drive if the drive is new. If you cannot find an uninitialized drive in Disk Management, skip the following steps and try to partition your device.

  1. Press the Windows key + R, type compmgmt.msc, and click Run to open Computer Management.

  2. Navigate to Disk Management.

  3. When prompted to, initialize your disk(s). If you are running Windows® 7 or later and are using a drive larger than 2TB, initialize the disk(s) with GPT. If you are running an earlier version of Windows, initialize the disk(s) with MBR. For more information, visit the following FAQ: https://www.startech.com/support/faqs/technical-support?topic=hard-drives#mbr-vs-gpt.

  4. Click OK.

Create a partition in a drive

Note: The following steps create an NTFS partition that uses the entire drive space. To use a different file system, select a different option in step 6.

  1. Right-click Unallocated or RAW volume, and select New Simple Volume.

  2. In the New Partition Wizard, click Next.

  3. Select Primary partition.

  4. Leave the partition size set to default, and click Next.

  5. Assign a drive letter or leave it set to the default, and click Next.

  6. Enter the following settings to format the partition:

  • In the File System field, enter NTFS.
  • Set the Allocation unit size to Default.
  • In the Volume label field, enter <your name/reference>.
  • Select the Perform a quick format check box.
  • Clear the Enable file and folder compression check box.
  1. Click Next > Finish.

The new drive should appear in Windows Explorer.

Mac OS

Before you can access a new or formatted drive in your operating system, you need to initialize it first and then create a partition on the drive. A partition defines an area of the drive to use for storing data. The partition uses a file system (for example, HFS+, ex-FAT, NTFS, and so on).

Initialize a drive

Mac OSX detects a drive that needs to be initialized and automatically prompts you to initialize the drive. If you are prompted to initialize the drive, click Initialize. If you are not prompted to initialize the drive and you cannot find the drive in Finder, you will need to create a partition on the drive.

Create a partition on a drive

Note: The following steps create an HFS+ (Mac OS Extended (Journaled)) partition that uses the entire drive space.

To create a partition on a new drive, complete the following:

  1. Open Finder.

  2. Navigate to Applications and click Utilities.

  3. Open Disk Utility.

  4. Select the new drive and click the Partition tab.

  5. Click Options and verify that it is set to GUID Partition Table.

  6. Enter a name for the partition.

  7. Click Partition.

The drive should now be accessible in Finder.

Compliance and safety

Compliance letters

Safety Measures

  • If product has an exposed circuit board, do not touch the product under power.
  • If Class 1 Laser Product. Laser radiation is present when the system is open.
  • Wiring terminations should not be made with the product and/or electric lines under power.
  • Product installation and/or mounting should be completed by a certified professional as per the local safety and building code guidelines.
  • Cables (including power and charging cables) should be placed and routed to avoid creating electric, tripping or safety hazards.
* Produkters utseende och specifikationer kan komma att ändras utan förvarning.
Vänta...
Tillbaka till toppen