StarTech.com

12in LP4 to 2x Right Angle Latching SATA Power Y Cable Splitter - 4 Pin Molex to Dual SATA

Power two SATA drives from a single LP4 power supply connector

Produkt ID: PYO2LP4LSATR

  • 1x Molex (LP4) power connector
  • 2x Right-Angle Latching SATA Power Receptacles
  • Provides 12" in cable length
4,99 € EUR exkl. moms
6,24 € EUR inkl. moms

Överblick

The PYO2LP4LSATR LP4 Molex to Dual Latching Right-Angle SATA power splitter cable features two Serial ATA female power connectors and one LP4 male connector - a reliable solution that enables you to power two SATA drives using a single LP4 connection to the computer power supply.

This durable LP4 to SATA Y cable adapter is 12 inches in length, giving you enough cable slack to position drives as needed within the computer case, while saving the cost and hassle of upgrading a power supply for compatibility with Serial ATA drives.

Expertly designed and constructed of top quality materials, the 4-pin Molex to SATA Splitter Power cable is backed by StarTech.com's Lifetime Warranty.

Fördelarna med StarTech.com

  • Cost-effective solution for powering two SATA drives from a single LP4 connection on the computer power supply, which eliminates the cost of a power supply upgrade for compatibility with SATA hard drives
  • Right-angled latching SATA cable connectors easily fit into hard to reach areas and tight spaces, and reduce the risk of accidental disconnections
  • Backed by StarTech.com lifetime warranty

Användning

Connect two Serial ATA hard drives to a standard Molex connection on your power supply

Compatible with Serial ATA hard drives, CD-RW drives, DVD-ROM drives, and other devices

Tekniska specifikationer

Information om garanti
Garanti Lifetime
Kontakt(er)
Connector A 1 - LP4 (4-stifts, Molex strömkontakt för stor enhet) Hane
Connector B 2 - SATA-ström (15-stifts) Med lås Honuttag
Utseende
Kabellängd 304.8 mm [12 in]
Kontakttyp Högervinklad
Produktlängd 304.8 mm [12 in]
Produktvikt 0 kg [0.1 lb]
Tråddimension 18 AWG
Förpackning
Förpackningsantal 1
Fraktvikt (förpackning) 0 kg [0.1 lb]
Vad det är i lådan
Ingår i paketet 1 - 12in LP4 to 2x Right Angle Latching SATA Power Y Cable Adapter

Certifikat

Relaterade produkter

12in LP4 to 2x Latching SATA Power Y Cable Splitter Adapter - 4 Pin Molex to Dual SATA
PYO2LP4LSATA
12in LP4 to 2x Latching SATA Power Y Cable Splitter Adapter - 4 Pin Molex to Dual SATA

Power two SATA drives from a single LP4 power supply connector

3,99 € exkl. moms
4,99 € inkl. moms
30 cm LP4 till 2x SATA ström Y-kabeladapter
PYO2LP4SATA
30 cm LP4 till 2x SATA ström Y-kabeladapter

Använd två SATA-enheter med en enda LP4-strömkontakt.

3,99 € exkl. moms
4,99 € inkl. moms
15 cm 4-stifts Molex till SATA-strömkabeladapter
SATAPOWADAP
15 cm 4-stifts Molex till SATA-strömkabeladapter

Strömförsörj en seriell ATA-hårddisk från en konventionell strömkälla med LP4-anslutning

2,99 € exkl. moms
3,74 € inkl. moms
6in 4 Pin Molex to Right Angle SATA Power Cable Adapter
SATAPOWADAPR
6in 4 Pin Molex to Right Angle SATA Power Cable Adapter

Power a Serial ATA hard drive from a conventional LP4 power supply connection

2,99 € exkl. moms
3,74 € inkl. moms

Produktsupport

Vanliga frågor

Problemsökning

When you troubleshoot issues with an internal power cable, there are some quick tests that you can complete to rule out potential problems. You can test to make sure that the following components are working correctly and are not the source of the issue:

  • Power supply

  • Computer part

  • Power cable

To test your setup components, try the following:

  • Use the power supply, computer part, and power cable in another setup to see if the problem is with the components or the setup.

  • Use a different power supply, computer part, and power cable in your setup to see if the problem persists. Ideally, you should test a component that you know works in another setup.

When you test your cable, it is recommended that you do the following:

  • Make sure that the cable is firmly inserted into both ends.

  • The polarity (usually indicated by the color of the cables) matches.

  • No pins are bent or missing on the power supply cable or header, or the computer part.