StarTech.com

Korsad Gigabit Cat 6 Ethernet-adapter

Omvandla en Cat 6 Ethernet-kabel till en Gigabit-kompatibel korsad kabel

Produkt ID: C6CROSSOVER

  • 1x RJ45-honkontakt
  • 1x RJ45-hankontakt
8,99 € EUR exkl. moms
11,24 € EUR inkl. moms
Inte tillgängligt
Kan finnas hos partners
Var kan jag köpa

Besök vår europeiska online-butik idag för fler produkter som denna!

Överblick

Den beständiga Cat 6 korsade adaptern gör om raka Cat 6 Ethernet-kablar till en korsad Ethernet-kabel.

Eftersom den är byggd med fyra korsade par, ger adapter fullständig Gigabit under hela driften.

Fördelarna med StarTech.com

  • Garanterad pålitlighet med StarTech.com:s livstidsgaranti

Användning

Omvandla en Cat 6 Ethernet-kabel till en Gigabit-kompatibel korsad kabel

Tekniska specifikationer

Information om garanti
Garanti Lifetime
Hårdvara
Antal ledare 8
Kabelmanteltyp PVC - Polyvinyl Chloride
Kontakt(er)
Connector A 1 - RJ-45 Hona
Connector B 1 - RJ-45 Hane
Utseende
Färg Röd
Ledningstyp Tvinnad koppar
Produktbredd 15 mm [0.6 in]
Produkthöjd 15 mm [0.6 in]
Produktlängd 45 mm [1.8 in]
Produktvikt 0 kg [0.1 lb]
Förpackning
Fraktvikt (förpackning) 0 kg [0.1 lb]
Vad det är i lådan
Ingår i paketet 1 - Korsad Gigabit Cat 6 Ethernet-adapter

Certifikat

Produktsupport

Vanliga frågor

Before You Buy

In order to work properly, straight-through Ethernet cables must be terminated with the same pin configurations on either end. Two different wiring standards exist for wired Ethernet: T568A (A wiring) and T568B (B wiring). A and B wiring offer the same electrical properties and either standard can be used. StarTech.com uses the T568B wiring standard for all of the straight-through Ethernet cables.

Note: For more information about the differences between straight-through and crossover Ethernet cables, refer to the following FAQ: http://www.startech.com/faq/network_cables_straight_through_vs_crossover.  

Wiring Pinout Table

Pin T568A T568B
1 white/green white/orange
2 green orange
3 white/orange white/green
4 blue blue
5 white/blue white/blue
6 orange green
7 white/brown white/brown
8 brown brown

 

Patch cables can come in two different wiring applications: straight-through and crossover. The type of cable that is required depends on the application. Straight-through Ethernet cables are the most commonly used.

Cable type Typical application
Straight-through
  • Between a computer and a modem, router, or switch
  • CAT5/CAT6 peripheral extenders
  • Between other dissimilar networking equipment
Crossover
  • Between two computers
  • Between two similar networking devices

Crossover cables use two different wiring standards: one end uses the T568A wiring standard, and the other end uses the T568B wiring standard. To determine if you have a straight-through or crossover cable, compare the Ethernet cables to see if the colors are wired in the same order on each end. For more information on Ethernet wiring standards, refer to the following FAQ: http://www.startech.com/faq/network_cables_a_vs_b_pinout.

Many modern network devices support Auto MDI-X, which automatically negotiates which wiring standard is required. For example, a computer with Auto MDI-X can use either a straight-through or crossover cable for any application.

Stranded Ethernet cables are flexible and are often used as patch cables, short cables that are ideal for connecting a computer to a wall outlet or to a router.  Solid Ethernet cables are rigid but have better signal strength.  These cables are ideal for use behind walls and in longer cable runs.