Korsad Gigabit Cat 6 Ethernet-adapter

Omvandla en Cat 6 Ethernet-kabel till en Gigabit-kompatibel korsad kabel


  • 1x RJ45-honkontakt
  • 1x RJ45-hankontakt
Ditt pris
€9,99 EUR excl. VAT
€12,49 EUR incl. VAT

Den beständiga Cat 6 korsade adaptern gör om raka Cat 6 Ethernet-kablar till en korsad Ethernet-kabel.

Eftersom den är byggd med fyra korsade par, ger adapter fullständig Gigabit under hela driften.


  • Omvandla en Cat 6 Ethernet-kabel till en Gigabit-kompatibel korsad kabel

Fördelarna med StarTech.com

  • Garanterad pålitlighet med StarTech.com:s livstidsgaranti


  • Ingram Micro Sweden V930813
  • ALSO Sweden 000000000002770667
  • UPC 065030831970


Warranty Information Warranty Lifetime
Förpackning Package Height 19 mm [0,7 in]
Package Length 12,5 cm [4,9 in]
Fraktvikt (förpackning) 14 g [0,5 oz]
Package Width 90 mm [3,5 in]
Hårdvara Antal ledare 8
Kabelmanteltyp PVC - Polyvinyl Chloride
Kontakt(er) 1 - Connector A RJ-45
1 - Connector B RJ-45
Utseende Produktvikt 12 g [0,4 oz]
Färg Röd
Ledningstyp Tvinnad koppar
Produktlängd 45 mm [1,8 in]
Produktbredd 15 mm [0,6 in]
Produkthöjd 15 mm [0,6 in]
Vad det är i lådan 1 - Ingår i paketet Korsad Gigabit Cat 6 Ethernet-adapter


Prata med en rådgivare.

Vi är alltid redo att hjälpa dig med alla dina frågor.

Direktchatt (opens in new window)



Prata med en rådgivare.

Vi är alltid redo att hjälpa dig med alla dina frågor.

Direktchatt (opens in new window)

Vanliga frågor

Before You Buy

In order to work properly, straight-through Ethernet cables must be terminated with the same pin configurations on either end. Two different wiring standards exist for wired Ethernet: T568A (A wiring) and T568B (B wiring). A and B wiring offer the same electrical properties and either standard can be used. StarTech.com uses the T568B wiring standard for all of the straight-through Ethernet cables.

Note: For more information about the differences between straight-through and crossover Ethernet cables, refer to the following FAQ: http://www.startech.com/faq/network_cables_straight_through_vs_crossover.  

Wiring Pinout Table

Pin T568A T568B
1 white/green white/orange
2 green orange
3 white/orange white/green
4 blue blue
5 white/blue white/blue
6 orange green
7 white/brown white/brown
8 brown brown


Patch cables can come in two different wiring applications: straight-through and crossover. The type of cable that is required depends on the application. Straight-through Ethernet cables are the most commonly used.

Cable type Typical application
  • Between a computer and a modem, router, or switch
  • CAT5/CAT6 peripheral extenders
  • Between other dissimilar networking equipment
  • Between two computers
  • Between two similar networking devices

Crossover cables use two different wiring standards: one end uses the T568A wiring standard, and the other end uses the T568B wiring standard. To determine if you have a straight-through or crossover cable, compare the Ethernet cables to see if the colors are wired in the same order on each end. For more information on Ethernet wiring standards, refer to the following FAQ: http://www.startech.com/faq/network_cables_a_vs_b_pinout.

Many modern network devices support Auto MDI-X, which automatically negotiates which wiring standard is required. For example, a computer with Auto MDI-X can use either a straight-through or crossover cable for any application.

Stranded Ethernet cables are flexible and are often used as patch cables, short cables that are ideal for connecting a computer to a wall outlet or to a router.  Solid Ethernet cables are rigid but have better signal strength.  These cables are ideal for use behind walls and in longer cable runs.

Compliance and safety

Compliance letters

Safety Measures

  • If product has an exposed circuit board, do not touch the product under power.
  • If Class 1 Laser Product. Laser radiation is present when the system is open.
  • Wiring terminations should not be made with the product and/or electric lines under power.
  • Product installation and/or mounting should be completed by a certified professional as per the local safety and building code guidelines.
  • Cables (including power and charging cables) should be placed and routed to avoid creating electric, tripping or safety hazards.
* Produkters utseende och specifikationer kan komma att ändras utan förvarning.
Tillbaka till toppen