StarTech.com

USB till seriell RS232 DB9-adapter med löstagbar 1,8 m USB A till B-kabel

Lägg till en seriell RS232-port till din bärbara eller stationära dator genom en löstagbar USB-kabel

Produkt ID: ICUSB232D

  • Ger USB till standard seriell RS232-anslutning
  • Löstagbar USB-kabeldesign (1,8 m USB A-B-kabel medföljer)
  • Stöder överföringshastigheter upp till 128 kbps
Visa mer
  • Kompatibel med Windows-, Mac OS- och Linux-plattformar
  • Kompatibel med USB 1.1-portar eller högre
  • USB-driven - Ingen extern strömadapter behövs
18,99 € EUR exkl. moms
23,74 € EUR inkl. moms

Överblick

ICUSB232D USB till seriell-adaptern med 1 port låter dig lägga till en seriell RS232 DB9-port till din bärbara eller stationära dator genom USB så att du kan ansluta till, övervaka och kontrollera en seriell enhet. För enkla anslutningar har adaptern en USB-honport av typ B så att du kan välja längd på USB-kabeln för att nå din seriella enhet (1,8 m USB A-B-kabel medföljer).

USB till RS232-adaptern är en praktisk och billig lösning för att ge äldre seriella anslutningar till enheter som till exempel POS-terminaler, seriemodem, industriell utrustning och många andra RS232-tillägg.

USB till seriell-konverteraren är enkel att installera och är kompatibel med många olika operativsystem, som till exempel Windows®, Mac OS® och Linux, för enkel integrering i blandade miljöer och har stöd för överföringshastigheter på upp till 128 kbps.

Täcks av StarTech.coms 2-årsgaranti och gratis livstidsgaranti på teknisk support.

Fördelarna med StarTech.com

  • Välj kabellängd för att nå enheten med en löstagbar USB-kabeldesign
  • Installera till nästan alla datorsystem genom kompatibilitet med många olika operativsystem som till exempel Windows, Mac OS och Linux
  • Den bärbara och lätta USB-drivna designen kräver ingen extra strömadapter

Användning

Lägg till äldre funktioner till nyare bärbara datorer, PC-datorer och servrar som inte har en inbyggd RS232-port

Anslut streckkodsläsare, kvittoskrivare och andra försäljningsenheter

Anslut, övervaka och styr industriella/automatiska sensorer och annan känslig utrustning

Anslut och programera LED- och digital skyltning

Tekniska specifikationer

Information om garanti
Garanti 2 Years
Hårdvara
Busstyp USB 2.0
Chipset-ID Prolific - PL2303TA
Gränssnitt Seriell
Industristandarder USB 2.0/1.1
RS232
Portar 1
Porttyp Kabeladaptrar
Prestanda
Databitar 5, 6, 7, 8
FIFO 512 Bytes
Flödeskontroll Ingen, Xon/Xoff, RTS/CTS, DCD/DTR/DSR
Maximal överföringshastighet 128 Kbps
Paritet None, Odd, Even, Mark, Space
Seriellt protokoll RS-232
Stoppbitar 1, 1.5, 2
Kontakt(er)
Kontakttyp(er) 1 - USB B (4-stifts) Hona
1 - DB-9 (9-stifts, D-Sub) Hane
Mjukvara
OS-kompatibilitet Windows® XP, Vista, 7, 8, 8.1, 10
Windows Server® 2003, 2008 R2, 2012, 2016
Mac OS® 10.6 to 10.13
Linux 3.5.x to 4.11.x LTS Versions only
Särskilda anmärkningar/krav
System- och kabelkrav Tillgänglig USB 1.1 port (eller högre)
Ström
Power Source Strömförsörjd via USB
Miljö
Drifttemperatur 0°C to 70°C (32°F to 158°F)
Förvaringstemperatur -10°C to 80°C (14°F to 176°F)
Luftfuktighet 5~95 % RH (icke-kondenserande)
Utseende
Färg Svart
Kabellängd 1.8 m [6 ft]
Kabinettyp Av plast
Produktbredd 32 mm [1.3 in]
Produkthöjd 22 mm [0.9 in]
Produktlängd 59 mm [2.3 in]
Produktvikt 35 g [1.2 oz]
Förpackning
Fraktvikt (förpackning) 198 g [7 oz]
Vad det är i lådan
Ingår i paketet 1 - USB till RS232-adapter
1 - 1,8 m USB-kabel - A till B
1 - Drivrutin CD
1 - Instruktionsbok

Kompatibilitet

Se alla kompatibla operativsystem
Windows® XP, Vista, 7, 8, 8.1, 10
Windows Server® 2003, 2008 R2, 2012, 2016
Mac OS® 10.6 to 10.13
Linux 3.5.x to 4.11.x LTS Versions only

Certifikat

Relaterade produkter

USB till seriell RS232 DB9-kabeladapter med 1 port – M/M
ICUSB232V2
USB till seriell RS232 DB9-kabeladapter med 1 port – M/M

Lägg till en RS232-serieport till din bärbara eller stationära dator genom USB

18,99 € exkl. moms
23,74 € inkl. moms
Micro USB till RS232 DB9 seriell adapterkabel för Android med USB-laddning - M/M
ICUSBANDR232
Micro USB till RS232 DB9 seriell adapterkabel för Android med USB-laddning - M/M

Lägg till en RS232 seriell port till din Android-smarttelefon eller surfplatta via Micro USB med USB-laddningsmöjligheter

40,99 € exkl. moms
51,24 € inkl. moms
1 Port Industrial USB to RS232 Serial Adapter with 5KV Isolation and 15KV ESD Protection
ICUSB232IS
1 Port Industrial USB to RS232 Serial Adapter with 5KV Isolation and 15KV ESD Protection

Add a galvanically isolated RS232 serial port with ESD protection through a USB port - DIN Rail Mountable

99,99 € exkl. moms
124,99 € inkl. moms
FTDI USB to Serial Null Modem DCE Adapter Cable
ICUSB232FTN
USB till nollmodem RS232 DB9 seriell DCE-kabeladapter med 1 port och FTDI

Lägg till en RS232 seriell nollmodemsport till din bärbara eller stationära dator genom USB

30,99 € exkl. moms
38,74 € inkl. moms

Tillbehör

Produktsupport

Vanliga frågor

Installation

Some driver installation packages may require you to disable driver signature enforcement in Windows 8, which will allow unsigned driver packages to be installed on your system.

Note: Before you continue, save any open documents and close all open programs.

To disable driver signature enforcement, complete the following:

  1. Press the Windows key + C.
  2. Click Settings > Change PC Settings.
  3. In the left pane, click General.
  4. In the right pane, under Advanced startup, click Restart now.

When your system finishes restarting, complete the following:

  1. Click Troubleshoot > Advanced options > Startup Settings > Restart.
  2. Press 7.

When your computer restarts, driver signature enforcement will be disabled and you can install your drivers.

Note: When you restart your computer after you install your drivers, driver signature enforcement will be enabled again. This does not prevent your newly installed drivers from working, but does prevent any other unsigned drivers from being installed until driver signature enforcement is disabled.

Some driver installation packages may require you to disable driver signature enforcement in Windows 8.1, which will allow unsigned driver packages to be installed on your system.

Note: Before you continue, save any open documents and close all open programs.

To disable driver signature enforcement, complete the following:

  1. Press the Windows key + C.
  2. Click Settings > Change PC Settings.
  3. In the left pane, click Update & Recovery.
  4. In the left pane, click Recovery.
  5. Under Advanced startup, click Restart now.

When your system finishes restarting, complete the following:

  1. Click Troubleshoot > Advanced options > Startup Settings > Restart.
  2. Press 7.

When your computer restarts, driver signature enforcement will be disabled and you can install your drivers.

Note: When you restart your computer after you install your drivers, driver signature enforcement will be enabled again. This does not prevent your newly installed drivers from working, but does prevent any other unsigned drivers from being installed until driver signature enforcement is disabled.­­­­­­­

You may need to disable Driver Signature Enforcement in Windows 10 to use some driver installation packages. When you disable this feature, you can install unsigned driver packages on your computer.

Note: Before you continue, save any open documents and close all of your programs. You will need to restart your computer to disable Driver Signature Enforcement.

To disable Driver Signature Enforcement, complete the following:

  1. Click the Windows icon in the taskbar.
  2. Click Power.
  3. Press and hold the Shift key and click Restart.

After your computer finishes restarting, complete the following:

  1. Click Troubleshoot Advanced Options Startup Settings > Restart.
  2. Press 7.   

When your computer finishes restarting, Driver Signature Enforcement will be disabled and you can install the drivers.

Note: When you restart your computer after you install your drivers, driver signature enforcement will be enabled again. This does not prevent your newly installed drivers from working, but does prevent any other unsigned drivers from being installed until driver signature enforcement is disabled.­­­­­­­

Hur man

To confirm that Windows detects your USB device, complete the following:

  1. Press the Windows key+R, type devmgmt.msc, and press Enter.
  2. In Device Manager, under the appropriate heading, confirm that your expansion card is listed and that there isn't an exclamation mark next to it.  For example, a USB controller card would be under Universal Serial Bus controllers.

Your USB device is listed according to the name of the chipset. To determine the name of the chipset of your USB device, navigate to www.StarTech.com and look on the Technical Specifications tab for your product.

To confirm that the Mac OS detects your USB device, complete the following:

  1. Click the Apple icon.
  2. Click About This Mac.
  3. Click More Info or System Report.
  4. Under the appropriate heading, confirm that your USB device is listed and that there isn't an error. For example, a network card would be under Ethernet Cards.

You may need to refresh the System Information page after you plug in your device.  To do so, press Command R with the System Information page open.

Your USB device is listed according to the name of the chipset. To determine the name of the chipset of your USB device, navigate to www.StarTech.com and look on the Technical Specifications tab for your product.

Problemsökning

If the USB device does not work after your computer has been in extended hibernation, it is likely that Windows has automatically turned off the USB Root hub to save power. 

The steps below outline how to configure the USB root hub to stay on during hibernation, to prevent this from happening.
 

Windows 10 / 8

  1. On your keyboard, press the Windows key + X and select Control Panel.
  2. Click Hardware and Sound, then click Power Options.
  3. Click Change plan settings for the plan you want to change.
  4. Click Change advanced power settings.
  5. Click the plus sign (+) next to “USB settings” and “USB selective suspend setting” to expand the options and change the setting to Disabled.
  6. Click OK to apply the setting.

Note: You may need to disconnect and re-connect your USB device after applying these settings to re-establish the connection.

Windows 7 / Vista

  1. Click the Start button and select Control Panel.
  2. Click Hardware and Sound, then click Power Options.
  3. Click Change plan settings for the plan you want to change.
  4. Click Change advanced power settings.
  5. Click the plus sign (+) next to “USB settings” and “USB selective suspend setting” to expand the options and change the setting to Disabled.
  6. Click OK to apply the setting.

Note: You may need to disconnect and re-connect your USB device after applying these settings to re-establish the connection.

Windows XP

  1. On your desktop, right-click the My Computer icon and select Properties.
  2. Click the Device Manager tab.
  3. Expand Universal Serial Bus controllers by clicking the arrow to the left of it.
  4. Right-click the first USB Root Hub device and select Properties.
  5. Click the Power Management tab.
  6. Clear the box next to Allow the computer to turn off this device to save power.
  7. Click OK to apply the setting.
  8. Repeat steps 4-7 for any remaining devices in the Universal Serial Bus Controllers section with “Root Hub” in the name.

Note: You may need to disconnect and re-connect your USB device after applying these settings to re-establish the connection.