USB till seriell RS232 DB9-adapter med löstagbar 1,8 m USB A till B-kabel

Lägg till en seriell RS232-port till din bärbara eller stationära dator genom en löstagbar USB-kabel

Produkt ID: ICUSB232D

  • Ger USB till standard seriell RS232-anslutning
  • Löstagbar USB-kabeldesign (1,8 m USB A-B-kabel medföljer)
  • Stöder överföringshastigheter upp till 128 kbps
Ditt pris
€23,99 EUR excl. VAT
€29,99 EUR incl. VAT

ICUSB232D USB till seriell-adaptern med 1 port låter dig lägga till en seriell RS232 DB9-port till din bärbara eller stationära dator genom USB så att du kan ansluta till, övervaka och kontrollera en seriell enhet. För enkla anslutningar har adaptern en USB-honport av typ B så att du kan välja längd på USB-kabeln för att nå din seriella enhet (1,8 m USB A-B-kabel medföljer).

USB till RS232-adaptern är en praktisk och billig lösning för att ge äldre seriella anslutningar till enheter som till exempel POS-terminaler, seriemodem, industriell utrustning och många andra RS232-tillägg.

USB till seriell-konverteraren är enkel att installera och är kompatibel med många olika operativsystem, som till exempel Windows®, Mac OS® och Linux, för enkel integrering i blandade miljöer och har stöd för överföringshastigheter på upp till 128 kbps.

Täcks av StarTech.coms 2-årsgaranti och gratis livstidsgaranti på teknisk support.

Användning

  • Lägg till äldre funktioner till nyare bärbara datorer, PC-datorer och servrar som inte har en inbyggd RS232-port
  • Anslut streckkodsläsare, kvittoskrivare och andra försäljningsenheter
  • Anslut, övervaka och styr industriella/automatiska sensorer och annan känslig utrustning
  • Anslut och programera LED- och digital skyltning

Fördelarna med StarTech.com

  • Välj kabellängd för att nå enheten med en löstagbar USB-kabeldesign
  • Installera till nästan alla datorsystem genom kompatibilitet med många olika operativsystem som till exempel Windows, Mac OS och Linux
  • Den bärbara och lätta USB-drivna designen kräver ingen extra strömadapter

Partnernummer

  • UPC 065030859448

Kompatibilitet

  • Windows 8 logo
  • Windows 7 logo
  • Windows 10 logo
  • Windows Server 2012 logo
  • macOS Sierra (10.12) logo
  • Linux logo
  • macOS Mojave (10.14) logo
  • Windows Server 2016 logo
  • Windows Server 2019 logo
  • macOS High Sierra (10.13) logo
  • macOS Catalina (10.15) logo
  • macOS Big Sur (11.0) logo
Windows® XP, Vista, 7, 8, 8.1, 10
Windows Server® 2003, 2008 R2, 2012, 2016, 2019
macOS 10.6 till 10.15, 11.0
Linux 3.5.x till 4.11.x Endast LTS-versioner

Specifikationer

Warranty Information Warranty 2 Years
Förpackning Package Height 3,3 cm [1,3 in]
Package Length 14,3 cm [5,6 in]
Fraktvikt (förpackning) 201,0 g [7,1 oz]
Package Width 17,3 cm [6,8 in]
Hårdvara Portar 1
Gränssnitt Seriell
Busstyp USB 2.0
Porttyp Kabeladaptrar
Industristandarder USB 2.0/1.1
RS232
Chipset-ID Prolific - PL2303TA
Kontakt(er) 1 - Kontakttyp(er) USB B (4-stifts)
DB-9 (9-stifts, D-Sub)
Miljö Drifttemperatur 0°C to 70°C (32°F to 158°F)
Förvaringstemperatur -10°C to 80°C (14°F to 176°F)
Luftfuktighet 5~95 % RH (icke-kondenserande)
Mjukvara OS-kompatibilitet Windows® XP, Vista, 7, 8, 8.1, 10
Windows Server® 2003, 2008 R2, 2012, 2016, 2019
macOS 10.6 till 10.15, 11.0
Linux 3.5.x till 4.11.x Endast LTS-versioner
Prestanda Seriellt protokoll RS-232
Maximal överföringshastighet 128 Kbps
Databitar 5, 6, 7, 8
FIFO 512 Bytes
Flödeskontroll Ingen, Xon/Xoff, RTS/CTS, DCD/DTR/DSR
Paritet None, Odd, Even, Mark, Space
Stoppbitar 1, 1.5, 2
Ström Power Source Strömförsörjd via USB
Särskilda anmärkningar/krav System- och kabelkrav Tillgänglig USB 1.1 port (eller högre)
Utseende Produktvikt 34,0 g [1,2 oz]
Färg Svart
Kabinettyp Av plast
Kabellängd 1,8 m [6,0 ft]
Produktlängd 5,9 cm [2,3 in]
Produktbredd 3,2 cm [1,3 in]
Produkthöjd 2,2 cm [0,9 in]
Vad det är i lådan 1 - Ingår i paketet USB till RS232-adapter
1,8 m USB-kabel - A till B
Drivrutin CD
Instruktionsbok

Tillbehör

USB2HAB65AC

20m / 65 ft Active USB 2.0 A to B Cable - M/M

Extend the distance between your USB 2.0 devices by up to 65ft

Ditt pris
€54,99 EUR excl. VAT
€68,74 EUR incl. VAT
USB2HAB50AC

15m / 50 ft Active USB 2.0 A to B Cable - M/M

Connect USB 2.0 devices up to 50ft away, with no signal loss

Ditt pris
€47,99 EUR excl. VAT
€59,99 EUR incl. VAT
USB2HAB30AC

9 m aktiv USB 2.0 A- till B-kabel

USB A till B-kabel | Hane till Hane | Svart

Ditt pris
€30,99 EUR excl. VAT
€38,74 EUR incl. VAT
USBAB3ML

3m USB 2.0 A to Left Angle B Cable - M/M

Connect hard-to-reach USB 2.0 peripherals, for installation in narrow spaces

Ditt pris
€6,99 EUR excl. VAT
€8,74 EUR incl. VAT
MXT1003MBK

3 m svart standard seriell DB9 RS232-kabel - M/F

Förläng anslutningen mellan dina seriella DB9-enheter med upp till 3 m

Ditt pris
€6,99 EUR excl. VAT
€8,74 EUR incl. VAT
MXT1002MBK

2m Black Straight Through DB9 RS232 Serial Cable - M/F

Extend the connection between your DB9 serial devices by up to 2m

Ditt pris
€5,99 EUR excl. VAT
€7,49 EUR incl. VAT
MXT10050CMBK

0.5m Black Straight Through DB9 RS232 Serial Cable - M/F

Extend the connection between your DB9 serial devices by up to 0.5m

Ditt pris
€4,99 EUR excl. VAT
€6,24 EUR incl. VAT

Drivers/Downloads

Prata med en rådgivare.

Vi är alltid redo att hjälpa dig med alla dina frågor.

Direktchatt (opens in new window)

Drivrutin(er):

Manual(er):

Datasheet

Produktsupport

Prata med en rådgivare.

Vi är alltid redo att hjälpa dig med alla dina frågor.

Direktchatt (opens in new window)

Vanliga frågor

Installation

Some driver installation packages may require you to disable driver signature enforcement in Windows 8, which will allow unsigned driver packages to be installed on your system.

Note: Before you continue, save any open documents and close all open programs.

To disable driver signature enforcement, complete the following:

  1. Press the Windows key + C.
  2. Click Settings > Change PC Settings.
  3. In the left pane, click General.
  4. In the right pane, under Advanced startup, click Restart now.

When your system finishes restarting, complete the following:

  1. Click Troubleshoot > Advanced options > Startup Settings > Restart.
  2. Press 7.

When your computer restarts, driver signature enforcement will be disabled and you can install your drivers.

Note: When you restart your computer after you install your drivers, driver signature enforcement will be enabled again. This does not prevent your newly installed drivers from working, but does prevent any other unsigned drivers from being installed until driver signature enforcement is disabled.

Some driver installation packages may require you to disable driver signature enforcement in Windows 8.1, which will allow unsigned driver packages to be installed on your system.

Note: Before you continue, save any open documents and close all open programs.

To disable driver signature enforcement, complete the following:

  1. Press the Windows key + C.
  2. Click Settings > Change PC Settings.
  3. In the left pane, click Update & Recovery.
  4. In the left pane, click Recovery.
  5. Under Advanced startup, click Restart now.

When your system finishes restarting, complete the following:

  1. Click Troubleshoot > Advanced options > Startup Settings > Restart.
  2. Press 7.

When your computer restarts, driver signature enforcement will be disabled and you can install your drivers.

Note: When you restart your computer after you install your drivers, driver signature enforcement will be enabled again. This does not prevent your newly installed drivers from working, but does prevent any other unsigned drivers from being installed until driver signature enforcement is disabled.­­­­­­­

You may need to disable Driver Signature Enforcement in Windows 10 to use some driver installation packages. When you disable this feature, you can install unsigned driver packages on your computer.

Note: Before you continue, save any open documents and close all of your programs. You will need to restart your computer to disable Driver Signature Enforcement.

To disable Driver Signature Enforcement, complete the following:

  1. Click the Windows icon in the taskbar.
  2. Click Power.
  3. Press and hold the Shift key and click Restart.

After your computer finishes restarting, complete the following:

  1. Click Troubleshoot Advanced Options Startup Settings > Restart.
  2. Press 7.   

When your computer finishes restarting, Driver Signature Enforcement will be disabled and you can install the drivers.

Note: When you restart your computer after you install your drivers, driver signature enforcement will be enabled again. This does not prevent your newly installed drivers from working, but does prevent any other unsigned drivers from being installed until driver signature enforcement is disabled.­­­­­­­

Prior to installing this device, ensure that your operating system is up to date (for example, you have installed the most recent service pack).

To install the driver:

  1. Download the latest drivers from the StarTech.com website (http://www.startech.com/Support). You can find the part number and product ID on the product’s packaging.

Note: Windows will typically save the files to the Downloads folder that is associated with your user account (for example, C:\Users\your_name\Downloads).

  1. Once the download is complete, right-click the zip folder that you downloaded, select Extract All, and follow the on-screen instructions.
  2. In the list of extracted files, right-click the Setup.exe file and select Run as Administrator.

Note: If the Run as Administrator option is not available, you might be attempting to run the installer from within the zipped file. Extract the files using the instructions in Step 2.

  1. Follow the on-screen prompts to install the device drivers and restart the computer when prompted.
  2. Once Windows has restarted, connect the USB serial adapter to your computer.
  3. Your computer will automatically complete the driver installation and your device should be ready to use.

Prior to installing this device, ensure that your operating system is up to date (for example, you have installed the most recent service pack).

To install the driver:

  1. Download the latest drivers from the StarTech.com website (http://www.startech.com/Support). You can find the part number and product ID on the product’s packaging.

Note: Windows will typically save the files to the Downloads folder that is associated with your user account (for example, C:\Documents and Settings\your_name\My Documents\Downloads).

  1. Once the download is complete, right-click the zip folder that you downloaded, select Extract All, and follow the on-screen instructions.
  2. In the list of extracted files, double-click the Setup.exe file.
  3. Follow the on-screen prompts to install the device drivers and restart the computer when prompted.
  4. Once Windows has restarted, connect the USB serial adapter to your computer.
  5. Your computer will automatically complete the driver installation and your device should be ready to use.

Problemsökning

If the USB device does not work after your computer has been in extended hibernation, it is likely that Windows has automatically turned off the USB Root hub to save power. 

The steps below outline how to configure the USB root hub to stay on during hibernation, to prevent this from happening.
 

Windows 10 / 8

  1. On your keyboard, press the Windows key + X and select Control Panel.
  2. Click Hardware and Sound, then click Power Options.
  3. Click Change plan settings for the plan you want to change.
  4. Click Change advanced power settings.
  5. Click the plus sign (+) next to “USB settings” and “USB selective suspend setting” to expand the options and change the setting to Disabled.
  6. Click OK to apply the setting.

Note: You may need to disconnect and re-connect your USB device after applying these settings to re-establish the connection.

Windows 7 / Vista

  1. Click the Start button and select Control Panel.
  2. Click Hardware and Sound, then click Power Options.
  3. Click Change plan settings for the plan you want to change.
  4. Click Change advanced power settings.
  5. Click the plus sign (+) next to “USB settings” and “USB selective suspend setting” to expand the options and change the setting to Disabled.
  6. Click OK to apply the setting.

Note: You may need to disconnect and re-connect your USB device after applying these settings to re-establish the connection.

Windows XP

  1. On your desktop, right-click the My Computer icon and select Properties.
  2. Click the Device Manager tab.
  3. Expand Universal Serial Bus controllers by clicking the arrow to the left of it.
  4. Right-click the first USB Root Hub device and select Properties.
  5. Click the Power Management tab.
  6. Clear the box next to Allow the computer to turn off this device to save power.
  7. Click OK to apply the setting.
  8. Repeat steps 4-7 for any remaining devices in the Universal Serial Bus Controllers section with “Root Hub” in the name.

Note: You may need to disconnect and re-connect your USB device after applying these settings to re-establish the connection.

Hur man

To confirm that Windows detects your USB device, complete the following:

  1. Press the Windows key+R, type devmgmt.msc, and press Enter.
  2. In Device Manager, under the appropriate heading, confirm that your expansion card is listed and that there isn't an exclamation mark next to it.  For example, a USB controller card would be under Universal Serial Bus controllers.

Your USB device is listed according to the name of the chipset. To determine the name of the chipset of your USB device, navigate to www.StarTech.com and look on the Technical Specifications tab for your product.

To confirm that the Mac OS detects your USB device, complete the following:

  1. Click the Apple icon.
  2. Click About This Mac.
  3. Click More Info or System Report.
  4. Under the appropriate heading, confirm that your USB device is listed and that there isn't an error. For example, a network card would be under Ethernet Cards.

You may need to refresh the System Information page after you plug in your device.  To do so, press Command R with the System Information page open.

Your USB device is listed according to the name of the chipset. To determine the name of the chipset of your USB device, navigate to www.StarTech.com and look on the Technical Specifications tab for your product.

Compliance and safety

Compliance letters

Safety Measures

  • If product has an exposed circuit board, do not touch the product under power.
  • If Class 1 Laser Product. Laser radiation is present when the system is open.
  • Wiring terminations should not be made with the product and/or electric lines under power.
  • Product installation and/or mounting should be completed by a certified professional as per the local safety and building code guidelines.
  • Cables (including power and charging cables) should be placed and routed to avoid creating electric, tripping or safety hazards.
* Produkters utseende och specifikationer kan komma att ändras utan förvarning.
Vänta...
Tillbaka till toppen