Are you in the United States?
Visit our U.S.A. & International site for relevant pricing, distribution and product availability information.
Go to StarTech.com(ST1000SPEX43)
4 Port PCI Express Gigabit Ethernet NIC Network Adapter Card
Add four Gigabit network interfaces to a Desktop PC or Server with an available PCI Express x4 slot
Produkt ID: ST1000SPEX42
- Four independent 10/100/1000 RJ45 Ethernet ports
- Jumbo Frame support up to 9k
- Fully Compliant with IEEE 802.3 IEEE 802.3u and IEEE 802.3ab
- Support for IEEE 802.1Q VLAN tagging and IEEE 802.1P Layer 2 Priority Encoding
- Crossover Detection & Auto-Correction (Auto MDIX)
- Microsoft NDIS5 Checksum Offload (IP, TCP, UDP) and Large send Offload Support
- On-chip 48KB Transmit/Receive Buffer
- Wake-on-LAN and Remote Wake-up Support
- Supports Full Duplex Flow Control (IEEE 802.3x)
- Supports Pair Swap/Polarity/Skew Correction
- PCI Express base specification 1.1 compliant
- Supports PCI Message Signaled Interrupt (MSI)
- Auto-sensing, self-configuring 10/100/1000 Mbps performance
Överblick
The ST1000SPEX42 4-port Ethernet Card is an IEEE 802.3/u/ab standards compliant PCIe network adapter, which adds connections to up to four separate high-speed Gigabit networks from a single desktop client, server or workstation.
Suitable for any PCI Express (x4) enabled computer, this Gigabit Ethernet Network Adapter Card offers a practical, cost-effective resource for business, corporate or government environments, with support for high performance 4-channel networking and maximum throughput up to 1000Mbps in each direction (2000 Mbps total) - up to ten times faster than 10/100 Ethernet.
Compatible with a broad range of operating systems, this versatile PCIe Gigabit NIC is suitable for many SMB and Enterprise applications such as virtualized environments that require multiple NICs (check your VM software for chipset compatibility).
The ST1000SPEX42 is backed by a StarTech.com 2-year hardware warranty and free lifetime technical support.
Fördelarna med StarTech.com
- Protect critical networked systems with four redundant, independent Gigabit Ethernet ports
- Optimize network traffic with support for advanced features such as Jumbo Frames and VLAN tagging
- Maximize your virtualized server’s networking efficiency with dedicated ports
- Backed by a StarTech.com 2-year warranty and free lifetime technical support
Användning
Specially designed for desktop PC clients, servers, and workstations with few PCI Express slots available
Ideal for VM environments with multiple operating systems, requiring shared or dedicated NICs
Provide redundant connectivity to ensure an uninterrupted network connection
Tekniska specifikationer
Produktnummer | ||
---|---|---|
UPC Code | 065030849562 |
Information om garanti | ||
---|---|---|
Garanti | 2 Years | |
Hårdvara | ||
Busstyp | PCI Express | |
Chipset-ID | Realtek - RTL8111E PLX - PEX8608 |
|
Gränssnitt | RJ45 (Gigabit Ethernet) | |
Industristandarder | Compliant with IEEE 802.3, IEEE 802.3u, IEEE 802.3ab | |
Korttyp | Standardprofil | |
Portar | 4 | |
Prestanda | ||
Auto MDIX | Ja | |
Buffertstorlek | 48 KB | |
Kompatibla nätverk | 10/100/1000 Mbps | |
Maximal dataöverföringshastighet | 1000Mbps | |
Stöd för full-duplex | Ja | |
Kontakt(er) | ||
Externa portar | 4 - RJ-45 Hona | |
Kontakttyp(er) | 1 - PCI Express x4 Hane | |
Mjukvara | ||
OS-kompatibilitet | Windows® 10 (32/64), 8 / 8.1 (32/64), 7 (32/64), Vista (32/64), XP (32/64), 2000 Windows Server® 2012, 2008 R2, 2003 Mac OS® 10.4 and up (Tested up to 10.10) Linux 2.4.x and later (Tested up to 3.5) |
|
Särskilda anmärkningar/krav | ||
System- och kabelkrav | Available PCI Express x4 slot | |
Indikatorer | ||
LED-indikatorer | 4 - Green - Link LED | |
4 - Yellow - Activity LED | ||
Ström | ||
Strömförbrukning | PCIe: +3.3V @ 1A maximum | |
Miljö | ||
Drifttemperatur | 0°C to 55°C (32°F to 131°F) | |
Förvaringstemperatur | -20°C to 85°C (-4°F to 185°F) | |
Luftfuktighet | 5~95% RH | |
Utseende | ||
Produktbredd | 102 mm [4 in] | |
Produkthöjd | 16 mm [0.6 in] | |
Produktlängd | 128 mm [5 in] | |
Produktvikt | 100 g [3.5 oz] | |
Förpackning | ||
Förpackningsantal | 1 | |
Fraktvikt (förpackning) | 212 g [7.5 oz] | |
Vad det är i lådan | ||
Ingår i paketet | 1 - 4 Port PCI Express Network Card | |
1 - Driver CD | ||
1 - Instruction Manual |
Kompatibilitet







Windows Server® 2012, 2008 R2, 2003
Mac OS® 10.4 and up (Tested up to 10.10)
Linux 2.4.x and later (Tested up to 3.5)
Relaterade produkter
PCI Express 10/100 Ethernet nätverksgränssnitt kortadapter med 1 port
Lägg till en 10/100 Mbps Ethernet-port på en stationär dator genom en PCI Express-kortplats
Tillbehör
Cat6 Patch Cable with Molded RJ45 Connectors - 25 ft. - Blue
Skapa ström-över-Ethernet-kompatibla gigabit-nätverksanslutningar
Cat5e patchkabel med gjutna RJ45-kontakter - 3 m - svart
Skapa snabba Ethernet nätverksanslutningar med denna högkvalitativa Cat5e-kabel med ström-över-Ethernet
Cat5e Patch Cable with Snagless RJ45 Connectors - 10 ft, Blue
Skapa snabba Ethernet nätverksanslutningar med denna högkvalitativa Cat5e-kabel med ström-över-Ethernet
Produktsupport
Drivrutiner
-
[Realtek] Windows Gigabit Network Adapter.zip
Windows 10, 2016: 10.027
Windows 8, 8.1, 2012, 2012-R2: 8.064
Windows 7, 2008-R2: 7.118- Språk: Engelsk
-
[Realtek] Mac Gigabit Network Adapter.zip
Version: 2.0.6
- Språk: Engelsk
-
[Realtek] Linux Gigabit Network Adapter.zip
Version: 8.043
- Språk: Engelsk
Bruksanvisningar
-
ST1000SPEX42.pdf
- Språk: Engelsk
Specifikationer
-
ST1000SPEX42_Datasheet-SV.pdf
- Språk: Svenska
Vanliga frågor
Installation
Prior to installing this device, ensure that your operating system is up to date (for example, you have installed the most recent service pack).
To install the driver:
- Download the latest drivers from the StarTech.com website (http://www.startech.com/Support). You can find the part number and product ID on the product’s packaging.
Note: Windows will typically save the files to the Downloads folder that is associated with your user account (for example, C:\Users\your_name\Downloads).
- Once the download is complete, right-click the zip folder that you downloaded, select Extract All, and follow the on-screen instructions.
- Select the appropriate folder for your operating system.
- Right-click Setup.exe.
- Click Run as Administrator.
Note: If the Run as Administrator option is not available, you might be attempting to run the installer from within the zipped file. Extract the files using the instructions in Step 2.
- Follow the on-screen prompts to install the device drivers and restart the computer when prompted.
- Your computer will automatically complete the driver installation and your device should be ready to use.
Copy Link
Was this information helpful? Ja Nej
Prior to installing this device, ensure that your operating system is up to date (for example, you have installed the most recent service pack).
To install the driver:
- Download the latest drivers from the StarTech.com website (http://www.startech.com/Support). You can find the part number and product ID on the product’s packaging.
Note: Windows will typically save the files to the Downloads folder that is associated with your user account (for example, C:\Documents and Settings\your_name\My Documents\Downloads).
- Once the download is complete, right-click the zip folder that you downloaded, select Extract All, and follow the on-screen instructions.
- Select the appropriate folder for your operating system.
- Double-click Setup.exe.
- Follow the on-screen prompts to install the device drivers and restart the computer when prompted.
- Your computer will automatically complete the driver installation and your device should be ready to use.
Copy Link
Was this information helpful? Ja Nej
Hur man
StarTech.com does not support a Preboot Execution Environment (PXE) as this requires third-party software. However, our devices can be used as long as the following conditions are met:
- The BIOS must support PXE.
- The BIOS must see the card.
- The environment must have drivers for the chipset used in the card.
- If using a USB networking card, the environment must have support for USB devices as well.
Copy Link
Was this information helpful? Ja Nej
The drivers on our website include a Realtek Diagnostic Toolkit that you can use to easily set up a VLAN tag.
Make sure that you are logged in as the local administrator before continuing.
- Download the latest drivers from the StarTech.com website (http://www.startech.com/Downloads). You can find the part number and product ID on the product’s packaging.
Note: Windows will typically save the files to the Downloads folder that is associated with your user account (for example, C:\Users\your_name\Downloads).
- Once the download is complete, right-click the Realtek_PCI_GbE.zip file or the Realtek_PCIe_GbE.zip file.
- Select Extract All and note the location that the files will be extracted to.
- Select Extract. The extracted files will open automatically.
- In the list of extracted files, do one of the following:
- If you are running Windows Vista/7/8, right-click the Setup.exe file and select Run as Administrator.
- If you are running Windows XP, double-click the Setup.exe file.
- Follow the on-screen instructions to install the software.
- Open the software and under the VLAN settings, you can add, delete, or modify the VID (VLAN ID).
Copy Link
Was this information helpful? Ja Nej
To confirm that Windows detects your expansion card, complete the following:
- Press the Windows key+R, type devmgmt.msc, and press Enter.
- In Device Manager, under the appropriate heading, confirm that your expansion card is listed and that there isn't an exclamation mark next to it. For example, a USB controller card would be under Universal Serial Bus controllers.
Your expansion card is listed according to the name of the chipset. To determine the name of the chipset of your expansion card, navigate to www.StarTech.com and look on the Technical Specifications tab for your product.
Copy Link
Was this information helpful? Ja Nej
To confirm that the Mac OS detects your expansion card, complete the following:
- Click the Apple icon.
- Click About This Mac.
- Click More Info or System Report.
- Under the appropriate heading, confirm that your expansion card is listed and that there isn't an error. For example, a network card would be under Ethernet Cards.
Your expansion card is listed according to the name of the chipset. To determine the name of the chipset of your expansion card, navigate to www.StarTech.com and look on the Technical Specifications tab for your product.
Copy Link
Was this information helpful? Ja Nej
Problemsökning
When you troubleshoot issues with a network adapter, there are some quick tests that you can complete to rule out potential problems. You can test to make sure that the following components are working correctly and are not the source of the issue:
- Ethernet cables
- Network devices
- Computer system
To test your setup components, try the following:
- Use the Ethernet cables, network devices, and computer system in another setup to see if the problem is with the components or the setup.
- Use different Ethernet cables, network devices, and a different computer system in your setup to see if the problem persists. Ideally, you should test a component that you know works in another setup.
When you test your cables, it is recommended that you do the following:
- Test each cable individually.
- Use short cables when you are testing.
When you test the Ethernet cables, network devices, and computer system, it is recommended that you do the following:
- In Device Manager, check under Network Adapters. To open Device Manager, press the Windows key + R, type devmgmt.msc, and press Enter.
- If you are using a USB network adapter and you do not see the network adapter listed in Device Manager, refer to the following FAQ: https://www.startech.com/support/faqs/technical-support?topic=expansion-cards#usb-cannot-detect-windows.
- If you are using a PCI/PCIe network adapter and you do not see the network adapter listed in Device Manager, refer to the following FAQ: https://www.startech.com/support/faqs/technical-support?topic=expansion-cards#pci-pcie-cannot-boot-os-or-detect-windows.
- If you are using a CardBus/ExpressCard adapter and you do not see the network adapter listed in Device Manager, refer to the following FAQ: https://www.startech.com/support/faqs/technical-support?topic=expansion-cards#cb-ec-cannot-detect-windows.
- If the device is listed with an error, follow the instructions on the product page to reinstall the drivers.
- Check to see if your network devices (for example, a network switch, router, and so on) use compatible protocols (for example, 10/100, Gigabit, and so on).
- Make sure that the link LEDs on the adapter are illuminated when it is plugged into a network device. If the link LEDs are illuminated, it means that a good electrical connection exists between the devices.
- If you use a wall jack with an Ethernet cable, make sure that the jack is patched in properly.
Copy Link
Was this information helpful? Ja Nej
Sometimes an on-board network interface card (NIC) conflicts with a new NIC. In these cases it is best to disable the on-board NIC.
The best way to disable your on-board NIC is to go into your BIOS and disable it there if possible. To do this, consult your motherboard manual.
You can also disable any NIC in Windows. Here is how you do this:
First click Start, or, in Windows 10 and 8, hold down the Windows key and press X. Then click Control Panel.
Windows 10
- Click Network and Internet.
- Click Network and Sharing Center.
- On the left, click Change adapter settings.
- Right-click the NIC that you would like to disable and select Disable.
Windows 8
- Click Network and Sharing Center.
- On the left, click Change adapter settings.
- Right-click the NIC that you would like to disable and select Disable.
Windows 7
- Click Network and Internet.
- Click Network and Sharing Center.
- On the left, click Change adapter settings.
- Right-click the NIC that you would like to disable and select Disable.
Windows Vista
- Click Network and Sharing Center.
- On the left, click Manage network connections.
- Right-click the NIC that you would like to disable and select Disable.
Windows XP
- Click Network Connections.
- Right-click the NIC that you would like to disable and select Disable.
Copy Link
Was this information helpful? Ja Nej
If you are experiencing speed or connectivity issues, it is best to set a specific speed at half or full duplex in your settings. You can set your network adapter to perform at a certain speed, but the device that the adapter is connected to (whether it is a router, switch, or computer) must also be able to perform at the same speed.
Note: You must log in as the local administrator before you continue.
To open Device Manager:
- Press Windows key + R.
- Type devmgmt.msc.
- Click OK.
- Open the Networking adapters section.
- Right-click the network adapter that you want to change and select Properties.
- Click the Advanced tab.
- Scroll down to Speed & Duplex. By default, it is set to Auto-Negotiate. Select any of the speeds that you see in the list.
- Click OK and restart your computer.
Copy Link
Was this information helpful? Ja Nej
Compliance and Safety
Compliance Letters
-
Country of Origin (COO)
- Språk: Engelsk
-
Letter of Conformity (LOC)
- Språk: Engelsk
-
Waste Electrical and Electronic Equipment Directive (WEEE)
- Språk: Engelsk
Safety Measures
- Rör aldrig vid enheter med oskyddade kretskort när strömmen är påslagen.
- Om laserproduktet är Klasse 1, laserstrålning avges när systemet är öppet.
- Montering av kabelavslutningar får inte göras när produkten och/eller elledningarna är strömförda.
- Installation och/eller montering får endast göras av behöriga yrkespersoner och enligt gällande lokala förordningar för säkerhet och byggnormer.
- Kablar (inklusive elkablar och laddningskablar) ska dras och placeras på så sätt att risk för snubblingsolyckor och andra olyckor kan undvikas.
* Produkters utseende och specifikationer kan komma att ändras utan förvarning.