StarTech.com

Lågprofils PCI 10/100 Mbps Ethernet-nätverkskortadapter med 1 port

Lägg till en 10/100 Mbps Ethernet-port till vilken lågprofils-PC som helst via en PCI-kortplats

Produkt ID: ST100SLP

  • En enkel 10/100 Mbps kompatibel RJ45 Ethernet-port
  • Nätverkslänk/aktivitet och 10/100 Mbps LED-indikatorer
  • Fullt kompatibel med IEEE 802.3, IEEE 802.3u, IEEE 802.3x
Visa mer
  • Fullt och halvt stöd för duplex
  • Korsdetektering & automatisk korrigering (Auto MDI/MDI-X)
  • Stödjer valfri Boot ROM (Realtek RTL8139D-kompatibel Boot ROM krävs)
12,99 € EUR exkl. moms
16,24 € EUR inkl. moms
I lager hos partner:
Var kan jag köpa

Överblick

Den här snabba Ethernet-nätverkskortadaptern med 1 port ger en pålitlig och kostnadseffektiv anslutning till Ethernet-nätverket som är perfekt för datorer med liten formfaktor.

Levererar en enkel anslutning till 10/100 Mbps (snabba) Ethernet-nätverk. Nätverkskortet (NIC) har automatisk förhandling som känner av de anslutna enheternas hastighet och duplex-kapacitet. Den har fullständigt duplexstöd för dataöverföringshastigheter upp till 200 Mbps.

En mångsidig lösning för nätverksgränssnitt. NIC har ett lågprofilsmonteringsfäste som passar datorer med liten formfaktor och stöds av alla populära operativsystem inklusive Windows, Linux, Mac OS och Novell-plattformer. Täcks av StarTech.coms livstidsgaranti.

Fördelarna med StarTech.com

  • Kostnadseffektivt och enkelt Ethernet-nätverksarbete för system (SFF) med lågprofil/liten formfaktor
  • Täcks av StarTech.coms livstidsgaranti och gratis livstidsgaranti på teknisk support

Användning

Ersätt en Ethernet-port som inte fungerar i en dator med liten formfaktor.

Lägg till nätverksfunktioner till ett gammalt system utan Ethernet-port

Lägg till ytterligare en Ethernet-port i en stationär dator eller en arbetsdator för redundans

Tekniska specifikationer

Information om garanti
Garanti Lifetime
Hårdvara
Busstyp PCI / PCI-X (5 / 3.3V)
Chipset-ID Realtek - RTL8100C
Gränssnitt RJ45 (10/100 Ethernet)
Industristandarder IEEE 802.3/802.3u
Korttyp Lågprofil (SP-fästen ingår)
Portar 1
Prestanda
Kompatibla nätverk 10/100 Mbps
Maximal dataöverföringshastighet 200 Mbits/s
Stöd för full-duplex Ja
Kontakt(er)
Externa portar 1 - RJ-45 Hona
Kontakttyp(er) 1 - PCI/PCI-X (universell 3,3 & 5 V, 32-bitars) Hane
Mjukvara
OS-kompatibilitet Windows® NT, 98SE, 2000, XP, Vista, 7, 8, 8.1, 10
Windows Server® 2008 R2, 2012, 2016
Mac OS® 10.0.4, 9.1 / 9.0
Unix, Linux 2.6 to 4.11.x LTS Versions Only
NetWare 3.x/4.x
Särskilda anmärkningar/krav
Obs. IRQ Line och I/O Adress tilldelad efter system
Indikatorer
LED-indikatorer 1 - 10/100 Mbps urval
1 - Nätverkslänk/aktivitet
Miljö
Drifttemperatur 0°C to 55°C (32°F to 131°F)
Luftfuktighet 10 ~ 90 % RH icke-kondenserande
Utseende
Produktbredd 20 mm [0.8 in]
Produkthöjd 80 mm [3.1 in]
Produktlängd 120 mm [4.7 in]
Produktvikt 56 g [2 oz]
Förpackning
Fraktvikt (förpackning) 0.1 kg [0.3 lb]
Vad det är i lådan
Ingår i paketet 1 - Lågprofils 10/100 Mbps Ethernet PCI-kort
1 - Fäste i helprofil
1 - Drivrutin CD
1 - Instruktionsbok

Kompatibilitet

Se alla kompatibla operativsystem
Windows® NT, 98SE, 2000, XP, Vista, 7, 8, 8.1, 10
Windows Server® 2008 R2, 2012, 2016
Mac OS® 10.0.4, 9.1 / 9.0
Unix, Linux 2.6 to 4.11.x LTS Versions Only
NetWare 3.x/4.x

Certifikat

Relaterade produkter

1 Port PCI 10/100 Mbps Ethernet Network Adapter Card
ST100S
1 Port PCI 10/100 Mbps Ethernet Network Adapter Card

Add a 10/100Mbps Ethernet port to a desktop computer through a PCI slot

10,99 € exkl. moms
13,74 € inkl. moms

Tillbehör

Produktsupport

Vanliga frågor

Before You Buy

Yes. This PCI card uses a universal connector keyed for both 3.3V and 5V that can be used with PCI and PCI-X. This type of connector is identified as having 2 separate notches, instead of just one.

Installation

Prior to installing this device, ensure that your operating system is up to date (for example, you have installed the most recent service pack).

To install the driver:

  1. Download the latest drivers from the StarTech.com website (http://www.startech.com/Support). You can find the part number and product ID on the product’s packaging.

Note: Windows will typically save the files to the Downloads folder that is associated with your user account (for example, C:\Users\your_name\Downloads).

  1. Once the download is complete, right-click the zip folder that you downloaded, select Extract All, and follow the on-screen instructions.
  2. Select the appropriate folder for your operating system.
  3. Right-click Setup.exe. 
  4. Click Run as Administrator.

Note: If the Run as Administrator option is not available, you might be attempting to run the installer from within the zipped file. Extract the files using the instructions in Step 2.

  1. Follow the on-screen prompts to install the device drivers and restart the computer when prompted.
  2. Your computer will automatically complete the driver installation and your device should be ready to use.

Prior to installing this device, ensure that your operating system is up to date (for example, you have installed the most recent service pack).

To install the driver:

  1. Download the latest drivers from the StarTech.com website (http://www.startech.com/Support). You can find the part number and product ID on the product’s packaging.

Note: Windows will typically save the files to the Downloads folder that is associated with your user account (for example, C:\Documents and Settings\your_name\My Documents\Downloads).

  1. Once the download is complete, right-click the zip folder that you downloaded, select Extract All, and follow the on-screen instructions.
  2. Select the appropriate folder for your operating system.
  3. Double-click Setup.exe.
  4. Follow the on-screen prompts to install the device drivers and restart the computer when prompted.
  5. Your computer will automatically complete the driver installation and your device should be ready to use.

Hur man

StarTech.com does not support a Preboot Execution Environment (PXE) as this requires third-party software. However, our devices can be used as long as the following conditions are met:

  1. The BIOS must support PXE.
  2. The BIOS must see the card.
  3. The environment must have drivers for the chipset used in the card.
  4. If using a USB networking card, the environment must have support for USB devices as well.

To confirm that Windows detects your expansion card, complete the following:

  1. Press the Windows key+R, type devmgmt.msc, and press Enter.
  2. In Device Manager, under the appropriate heading, confirm that your expansion card is listed and that there isn't an exclamation mark next to it.  For example, a USB controller card would be under Universal Serial Bus controllers.

Your expansion card is listed according to the name of the chipset. To determine the name of the chipset of your expansion card, navigate to www.StarTech.com and look on the Technical Specifications tab for your product.

To confirm that the Mac OS detects your expansion card, complete the following:

  1. Click the Apple icon.
  2. Click About This Mac.
  3. Click More Info or System Report.
  4. Under the appropriate heading, confirm that your expansion card is listed and that there isn't an error. For example, a network card would be under Ethernet Cards.

Your expansion card is listed according to the name of the chipset. To determine the name of the chipset of your expansion card, navigate to www.StarTech.com and look on the Technical Specifications tab for your product.

Problemsökning

When you troubleshoot issues with a network adapter, there are some quick tests that you can complete to rule out potential problems. You can test to make sure that the following components are working correctly and are not the source of the issue:

  • Ethernet cables
  • Network devices
  • Computer system

To test your setup components, try the following:

  • Use the Ethernet cables, network devices, and computer system in another setup to see if the problem is with the components or the setup.
  • Use different Ethernet cables, network devices, and a different computer system in your setup to see if the problem persists. Ideally, you should test a component that you know works in another setup.

When you test your cables, it is recommended that you do the following:

  • Test each cable individually.
  • Use short cables when you are testing.

When you test the Ethernet cables, network devices, and computer system, it is recommended that you do the following:

Sometimes an on-board network interface card (NIC) conflicts with a new NIC.  In these cases it is best to disable the on-board NIC.

The best way to disable your on-board NIC is to go into your BIOS and disable it there if possible.  To do this, consult your motherboard manual.

You can also disable any NIC in Windows.  Here is how you do this:

First click Start, or, in Windows 10 and 8, hold down the Windows key and press X.  Then click Control Panel.

Windows 10

  1. Click Network and Internet.
  2. Click Network and Sharing Center.
  3. On the left, click Change adapter settings.
  4. Right-click the NIC that you would like to disable and select Disable.

Windows 8

  1. Click Network and Sharing Center.
  2. On the left, click Change adapter settings.
  3. Right-click the NIC that you would like to disable and select Disable.

Windows 7

  1. Click Network and Internet.
  2. Click Network and Sharing Center.
  3. On the left, click Change adapter settings.
  4. Right-click the NIC that you would like to disable and select Disable.

Windows Vista

  1. Click Network and Sharing Center.
  2. On the left, click Manage network connections.
  3. Right-click the NIC that you would like to disable and select Disable.

Windows XP

  1. Click Network Connections.
  2. Right-click the NIC that you would like to disable and select Disable.

If you are experiencing speed or connectivity issues, it is best to set a specific speed at half or full duplex in your settings.  You can set your network adapter to perform at a certain speed, but the device that the adapter is connected to (whether it is a router, switch, or computer) must also be able to perform at the same speed.

Note: You must log in as the local administrator before you continue.

To open Device Manager:

  • Press Windows key + R.
  • Type devmgmt.msc.
  • Click OK.
  1. Open the Networking adapters section.
  2. Right-click the network adapter that you want to change and select Properties.
  3. Click the Advanced tab.
  4. Scroll down to Speed & Duplex. By default, it is set to Auto-Negotiate. Select any of the speeds that you see in the list.
  5. Click OK and restart your computer.