StarTech.com

OAM-hanterad Gigabit Ethernet fibermediaomvandlare – multiläge LC 550 m – 802.3ah-kompatibel

Konvertera och förläng en Gigabit Ethernet-anslutning över LC fiber i multiläge med fjärrhantering

Produkt ID: ET91000LCOAM

  • Stöder fristående användningar och installation i ETCHS2U hyllmonterbart chassi
  • Stöder 802.3ah intern OAM-hantering för övervakning av anslutningsstatus
  • Gigabit multiläge LC SFP installerad (upp till 550 m)
Visa mer
  • SFP kan tas bort från enheten för utbyte till ny eller till annan specifikation
  • Stöd för 9k jumboram
  • Kontroll av bandbredd port för port
  • Stöder full eller halv duplex
  • Stöder Auto Laser Shutdown (ALS)
301,99 € EUR exkl. moms
377,49 € EUR inkl. moms

Överblick

ET91000LCOAM fibermediaomvandlare med hantering låter dig förlänga en Gigabit Ethernet-anslutning över LC fiber i multiläge och dessutom med fjärrhantering.

Denna mediaomvandlare med hantering är kompatibel med 802.3ah OAM (Operations, Administration & Management) och har ett lättanvänt webbgränssnitt för drift, administration och underhåll för att snabbt kunna avgöra positionen för felaktiga länkar och feltillstånd utan att skicka servicepersonal till enhetens fysiska plats.

Ethernet till fiber-omvandlaren är en effektiv lösning för anslutning av Gigabit Ethernet-nätverk (1000Base-T) till avlägsna delar av nätverket över ett fiberstamnätverk (1000Base-LX/SX) och stöder full Gigabit-hastighet vid avstånd på upp till 550 m genom installerad LC SFP i multiläge. Omvandlaren har dessutom ett chassi helt i stål för hållbarhet i tuffa miljöer.

Fibermediaomvandlaren stöder dessutom fristående användningar och installation i 2U rackmonterade chassin med 20 kortplatser(ETCHS2U) samt en utbytbar MSA-kompatibel SFP-port.

Täcks av StarTech.coms 2-årsgaranti och gratis livstidsgaranti på teknisk support.

Fördelarna med StarTech.com

  • Anpassa inställningar och övervaka länken på håll med OAM-hantering
  • Fungerar som en fristående enhet men kan även installeras i ETCHS2U-chassit med 20 kortplatser för ännu mer mångsidighet
  • Tåligt stålhölje för hållbarhet i tuffa miljöer

Användning

Ger anslutning till användare eller nätverksegment som befinner sig på ett isolerat område i en stor anläggning eller i en annan byggnad

Perfekt för myndigheter som kräver säkra anslutningar och där EMI inte accepteras

Förläng nätverk till avlägsna områden på stadion, hörsalar eller andra arenor

Anslut system för trafikkontroll eller övervakning till ett huvudkontor även från extrema avstånd

Tekniska specifikationer

Information om garanti
Garanti 2 Years
Hårdvara
Industristandarder IEEE 802.3 10BASE-T
IEEE 802.3ab 1000BASE-T
IEEE 802.3ah EFM
IEEE 802.3u 100BASE-TX
IEEE 802.3z 1000BASE-LX
IEEE 802.3z 1000BASE-SX
PoE Nej
WDM Nej
Prestanda
Auto MDIX Ja
DDM Nej
Fiber-driftsläge Full-duplex
Fibertyp Multiläge
Kompatibla nätverk 1000 Mbps (1 Gbps)
Maximal dataöverföringshastighet 1.25 Gbps
Maximalt överföringsavstånd 550 m (1804 ft)
Medeltid mellan fel (MTBF) 65,000 Hrs
Våglängd 850nm
Kontakt(er)
Lokala enhetskontakter 1 - Fiberoptisk LC duplex Hona
1 - RJ-45 Hona
Ström
Inspänning 100 ~ 240 AC
Inström 0.36 A
Kontakttyp M
Polaritet på mittpol Positiv
Power Source AC-adapter medföljer
Strömförbrukning 12
Utspänning 12 DC
Utström 1.6 A
Miljö
Drifttemperatur 0°C to 60°C (32°F to 140°F)
Förvaringstemperatur -10°C to 70°C (14°F to 158°F)
Luftfuktighet 10~90 % RH icke-kondenserande
Utseende
Färg Svart
Kabinettyp Stål
Produktbredd 87 mm [3.4 in]
Produkthöjd 23 mm [0.9 in]
Produktlängd 163 mm [6.4 in]
Produktvikt 411 g [14.5 oz]
Förpackning
Fraktvikt (förpackning) 789 g [27.9 oz]
Vad det är i lådan
Ingår i paketet 1 - Fibermediaomvandlare
1 - jordande skruv
1 - Universell strömadapter (NA/EU/UK/AU)
1 - Instruktionsbok

Certifikat

Relaterade produkter

Gigabit Ethernet Fiber Media Converter with Open SFP Slot
ET91000SFP2
Gigabit Ethernet Fiber Media Converter with Open SFP Slot

Convert and extend a Gigabit Ethernet connection over fiber using the Gigabit SFP of your choice

205,99 € exkl. moms
257,49 € inkl. moms
Gigabit Ethernet Single Mode Fiber Media Converter SC 40 km - 1000 Mbps
ET91000SM402
Gigabit Ethernet Single Mode Fiber Media Converter SC 40 km - 1000 Mbps

Convert and extend a Gigabit Ethernet connection up to 24.8 miles/40 km over Single Mode SC fiber

639,99 € exkl. moms
799,99 € inkl. moms
Gigabit Ethernet Fiber Media Converter Card Module with Open SFP Slot
ET91000SFP2C
Gigabit Ethernet Fiber Media Converter Card Module with Open SFP Slot

Convert and extend a Gigabit Ethernet connection over fiber, using the Gigabit SFP of your choice

163,99 € exkl. moms
204,99 € inkl. moms
Fiber Media Converter Gigabit 1000Mbps MM Fibre LC 550m
ET91000LC2
Fiber Media Converter Gigabit 1000Mbps MM Fibre LC 550m

Convert and extend a Gigabit Ethernet connection up to 550 m / 1804 ft over Multimode LC fiber

251,99 € exkl. moms
314,99 € inkl. moms
Gigabit Ethernet fibermediaomvandlare med multiläge SC 550 m – 1000 Mbps
ET91000SC2
Gigabit Ethernet fibermediaomvandlare med multiläge SC 550 m – 1000 Mbps

Konvertera och förläng en Gigabit Ethernet-anslutning med upp till 550 m över SC-fiber i multiläge

203,99 € exkl. moms
254,99 € inkl. moms

Tillbehör

Produktsupport

Drivrutiner & hämtningsbara filer

Vanliga frågor

Before You Buy

Different optical cables are needed for different applications. Before you select a cable to interconnect fiber devices, make sure that the following things match:

  • Mode: Single Mode or Multi Mode.

  • Wavelength: For example, 850 nm, 1310 nm, or 1550 nm.

Note: The above properties cannot be converted or changed by a cable.

When you select a cable, make sure that the cable ends (for example, LC, SC, ST, or MT) match the fiber media devices.

Simplex and duplex ends are available for most connector types. Simplex cables have the connectors separate, where duplex cables have the transmit (TX) and receive (RX) connectors joined together.  StarTech.com fiber media devices are compatible with simplex and duplex connectors.

It does not matter which diameter or OM classification the cable uses, as long as it meets the mode requirement.

Fiber media converters can be used to convert a standard Ethernet connection to a standard fiber connection, or can be used to extend a copper Ethernet network. When you use fiber media converters to extend a copper Ethernet network, make sure that the same fiber standards are being used on either end of the fiber network.

Note: Terms like 1000BASE-LX, 100BASE, 1000BASE, and 10GBASE refer to how fast the data can transfer, with 100BASE being 100Mb/s, 1000BASE being 1000Mb/s or 1GB/s, and 10GBASE being 10Gb/s. FX, SX, LX, and SR refer to different fiber standards and use different wavelengths (among other things).

Fiber media converters come in different types for different applications. You need to consider the specifications for both network devices before you can select the correct fiber media converters.

A fiber media converter can be used to simply convert fiber to copper (for example, 100BASE-FX to 100BASE-TX), convert copper to fiber, or it can be used to extend a copper network over fiber optic cabling. If you use an application that uses fiber media converters, the copper and fiber industry standards must match.

The following is an example of a working fiber to copper setup:

  • A network switch that has an LC fiber output using 1000BASE-LX is connected to an LC fiber cable that patches into the ET1000S40LC2, which is compatible with 1000BASE-LX/SX. The connected copper device is 1000BASE-T.

If the copper device in the above setup is 10/100 (100BASE-T), no copper link would be detected.

Note: Some media converters do not auto-negotiate copper or fiber standards, which limits the device to 10/100 or gigabit operation. For more information, check the specifications of the media converter.

When you use the fiber media converter in a network extender setup, it works best if you use the same media converter on either end. As long as the fiber standards match, you can use different connectors and the fiber network will be created between the units.

The following are some examples of available fiber connector types:

  • LC
  • SC
  • ST
  • Open SFP

The Open SFP units (referred to as Open on the Fiber Media Converter Drilldown) can use any mini-GBIC or SFP compatible fiber transceiver. The ET LC fiber media converters include LC SFPs, which makes the unit an open SFP, if required.

Problemsökning

When you troubleshoot issues with a fiber media converter, there are some quick tests that you can complete to rule out potential problems. To identify what the source of the issue is, observe the power LED, LAN LEDs, and fiber link LED on the units.

If the power LED is not illuminated for the transmitter or the receiver, complete the following:

  • Make sure that you are using the provided power adapter(s).

  • Make sure that the adapter is plugged into a compatible wall outlet.

  • Make sure that the adapter is plugged into both the transmitter and receiver.

If another LED is not operating as expected, make sure that the components in your setup are working correctly. To test your setup components, try the following:

  • Use the cables, fiber media converter, and network devices (including SFPs, if applicable) in another setup to see if the problem is with the components or the setup.

  • Use different cables, fiber media converter, and network devices (including SFPs, if applicable) in your setup to see if the problem persists. Ideally, you should test components that you know work in another setup.

When you test your cables, it is recommended that you do the following:

  • Test each cable individually.

  • Use short cables when you are testing.

Make sure that the DIP switches are set to the following:

  • DIP switches should be identical on both local and remote units. By default, DIP switches are set to Off (the switch is pointing up).

  • For more information about the advanced configuration options, refer to the manual for your product.

If you cannot establish a network connection between your local and remote units, you need to do the following to make sure that the issue is not related to the network configuration:

  • Use two computer systems directly connected to the fiber media converter LAN ports.

  • Open a command prompt on Computer 1 and ping Computer 2.

If the issue is not related to the network configuration, you should receive a response from Computer 2.

 

For more information on how to ping another network device, refer to the following FAQ: https://www.startech.com/support/faqs/technical-support?topic=networking#ping-test-windows-mac-os.

You should not upgrade your device's firmware if you do not have any issues with the functionality of your device. The only time you should consider an upgrade is if you are experiencing a problem with the device, and you have confirmed that the firmware addresses this problem.  You can confirm this is the case by reviewing the documentation included with the firmware or from consulting with our Technical Support team. Incorrectly upgrading firmware can result in diminished performance so it is best to contact StarTech.com if you would like to perform this operation.