Produkt ID: DP2HD4KADAP
Denna DisplayPort™ till HDMI® adapter stödjer 4K videoupplösning, vilket gör att du kan ansluta DisplayPort-enheter, såsom en Ultrabook™ eller stationär dator, till en 4K HDMI skärm eller projektor.
Du kommer att bli förvånad över hur denna adapter på ett felfritt sätt hanterar ditt grafikintensiva innehåll. Med stöd för upplösningar på upp till 4K - fyra gånger högre upplösning än HD 1080p - gör dess förlustfria prestanda adaptern till en idealisk lösning för tillämpningar som kräver stora resurser, såsom grafisk design, CAD & CAM design eller bildtekniker inom sjukvården (MRT, röntgendiagnostik etc.).
4K-adaptern stödjer dessutom 1080p skärmar, vilket gör den till ett utmärkt tillbehör för hemmet, kontoret eller andra tillämpningar på arbetsytan.
Denna DP till HDMI adapter är oerhört portabel, med en lätt och utrymmessnål design. Den är ett utmärkt tillbehör att ta med till din Ultrabook då den lätt får plats i datorfodralet eller datorväskan. Den oerhört portabla designen gör adaptern perfekt för BYOD-tillämpningar (Bring Your Own Device) på kontoret och gör att du kan anlända förberedd när du ska hålla i en presentation för en potentiell kund, undervisa på annan plats eller resa för ett möte med en kund.
DP2HD4KADAP täcks av StarTech.coms 3-årsgaranti och gratis livstidsgaranti på teknisk support.
Warranty Information | Warranty | 3 Years |
---|---|---|
Förpackning | Fraktvikt (förpackning) | 36 g [1,3 oz] |
Package Length | 14,5 cm [5,7 in] | |
Package Width | 98 mm [3,9 in] | |
Package Height | 26 mm [1,0 in] | |
Hårdvara | Active or Passive Adapter | Passiv |
AV-ingång | DisplayPort - 1.2 | |
Portar | 1 | |
AV-utgång | HDMI - 1.4 | |
Audio | Ja | |
Industristandarder | DPCP (DisplayPort Content Protection) HDCP (High Definition Content Protection) DisplayPort 1.2 HDMI 1.4 |
|
Kontakt(er) | 1 - Connector A | DisplayPort (20-stifts) |
1 - Connector B | HDMI (19-stifts) | |
Miljö | Drifttemperatur | 0°C to 60°C (32°F to 140°F) |
Förvaringstemperatur | -10°C to 70°C (14°F to 158°F) | |
Luftfuktighet | 10%~85%RH | |
Prestanda | Audio-specifikationer | HDMI - 7.1 Channel Audio |
Maximum Cable Distance To Display | 15,2 m [49,9 ft] | |
Maximal digital upplösning | 3840x2160 30Hz (4K) | |
Stödda upplösningar | 3840x2160 30Hz (4K) 1920x1200 1920x1080 60Hz (1080p) 1280x720 (720p) |
|
Stöd för widescreen | Ja | |
Medeltid mellan fel (MTBF) | 1,482,115 timmar | |
Särskilda anmärkningar/krav | System- och kabelkrav | DP++ port (DisplayPort ++) krävs på videokort eller videokälla (genomströmning av DVI och HDMI måste stödas) |
Utseende | Produktvikt | 7,5 g [0,3 oz] |
Färg | Svart | |
Produktlängd | 64 mm [2,5 in] | |
Produktbredd | 21 mm [0,8 in] | |
Produkthöjd | 11 mm [0,4 in] | |
Vad det är i lådan | 1 - Ingår i paketet | DisplayPort till HDMI-adapter |
Vi är alltid redo att hjälpa dig med alla dina frågor.
Direktchatt (opens in new window)Vi är alltid redo att hjälpa dig med alla dina frågor.
Direktchatt (opens in new window)If a DisplayPort converter with audio is not passing sound from the source to the destination, complete the following:
Unfortunately no, this device has an intended source and an intended destination. Refer to the title of the webpage for this order.
When you convert video from a source that uses DisplayPort or Mini DisplayPort to DVI or HDMI (for example, a computer to a monitor), you will need to consider the difference between passive and active adapters.
If the source supports dual-mode DisplayPort (also known as DP++), then you can use a passive adapter because the source can perform the conversion. If the source does not support DP++, then you need to use an active converter, which includes additional chips to perform the conversion.
Thunderbolt ports support DP++ natively. To run multiple monitors from the same computer, refer to the Active Adapters section below.
Passive Adapters
Passive adapters are less expensive since they do not need to include additional chips. A quick way to check whether you can use a passive adapter is to see if the DisplayPort or Mini DisplayPort source has the DP++ symbol above it. The symbol is a D with a P inside of it, with two + signs to the left, one on top of the other.
Active Adapters
Active adapters use additional chips to make the conversion inside the adapter, regardless of whether the source supports DP++. This means that active adapters are more expensive than passive adapters.
If you want to use multiple monitors with the same computer, you should use an active adapter because some video cards cannot run the maximum number of monitors while using DP++. This is especially true if the computer has more than one DisplayPort or Mini DisplayPort connection. Check with your video card manufacturer to confirm which type of adapter you need for the setup that you would like to run.
Note: You should use passive adapters with StarTech.com MST hubs, except when you are converting from DisplayPort to VGA, since that type of conversion requires active adapters. For more information on using adapters with StarTech.com MST hubs, refer to the following FAQ: http://www.startech.com/faq/mst_hubs_passive_vs_active_adapters.
Surface Dock
If you experience issues when you connect passive video signal adapters to the Surface Dock, Microsoft recommends that you use active video signal converters instead. StarTech.com offers an active video signal converter for DVI monitors (MDP2DVIS) and for HDMI monitors (MDP2HD4KS).
Note: This issue does not apply to the Surface Pro 3 Docking Station.