DisplayPort till HDMI-videoadapter - M/F

Anslut din HDMI®-bildskärm eller din HDTV till en DisplayPort®-utrustad dator

Produkt ID: DP2HDMIADAP

  • Stödjer PC-bildupplösningar på upp till 1920 x 1200 och bildupplösning på HDTV är upp till 1080p
  • Adaptern är enkel att använda och kräver ingen programvara
Ditt pris
€17,99 EUR excl. VAT
€22,49 EUR incl. VAT

DP2HDMIADAP DisplayPort® till HDMI® adaptern har en hankontakt för DisplayPort och en honkontakt för HDMI vilket gör det möjligt för dig att behålla befintlig HDMI-skärm samtidigt som du använder en DisplayPort videokort/-källa.

Den här kostnadseffektiva lösningen har kvar samma otroliga grafiska prestandan som DisplayPort ger. Den stödjer upplösningar på upp till 1920 x 1200 (dator)/1080p (HDTV). Med den behöver du inte uppgradera din HDMI-kompatibla skärm till en skärm med inbyggt stöd för DisplayPort.

DP2HDMIADAP är en passiv adapter som kräver en DP++ port (DisplayPort++). Det betyder att DVI- och HDMI-signaler kan gå igenom porten.

Adaptern tillåter genomströmning av audio om det stöds av videokällan. Se videokällans manual för att se om det stöds.

Täcks av StarTech.coms 3-årsgaranti och gratis livstidsgaranti på teknisk support.

Användning

  • DisplayPort® till HDMI®-adaptern gör det möjligt att ansluta till vilken HDMI-skärm som helst utan några problem

Fördelarna med StarTech.com

  • En enkel och liten formfaktorskonverterare gör DisplayPort® videokortet bakåtkompatibel med din HDMI®-bildskärm
  • Den är enkel att använda och kräver ingen programvara eller drivrutiner

Partnernummer

  • Ingram Micro Sweden V930785
  • ALSO Sweden 000000000002763738
  • UPC 065030832427

Specifikationer

Warranty Information Warranty 3 Years
Förpackning Package Height 11 mm [0.4 in]
Package Length 12.5 cm [4.9 in]
Fraktvikt (förpackning) 18 g [0.6 oz]
Package Width 90 mm [3.5 in]
Hårdvara Active or Passive Adapter Passiv
AV-ingång DisplayPort - 1.2
Adapterstil Adaptrar
AV-utgång HDMI - 1.4
Audio Ja
Kontakt(er) 1 - Connector A DisplayPort (20-stifts)
1 - Connector B HDMI (19-stifts)
Miljö Drifttemperatur 5°C to 35°C (41°F to 95°F)
Förvaringstemperatur -20°C to 60°C (-4°F to 140°F)
Luftfuktighet 65% ±10%RH
Prestanda Audio-specifikationer HDMI - 7.1 Channel Audio
Maximum Cable Distance To Display 15.2 m [49.9 ft]
Maximal digital upplösning 1920x1200 / 1080p
Särskilda anmärkningar/krav System- och kabelkrav DP++ port (DisplayPort ++) krävs på videokort eller videokälla (genomströmning av DVI och HDMI måste stödas)
Utseende Produktvikt 16 g [0.6 oz]
Färg Svart
Produktlängd 55 mm [2.2 in]
Produktbredd 18 mm [0.7 in]
Produkthöjd 9 mm [0.4 in]
Vad det är i lådan 1 - Ingår i paketet DisplayPort till HDMI-adapter

Tillbehör

HDMIDVIMM6

6 ft HDMI to DVI-D Cable - M/M

Connect an HDMI®-enabled output device to a DVI-D display, or a DVI-D output device to an HDMI-capable display

Ditt pris
€10,99 EUR excl. VAT
€13,74 EUR incl. VAT
HDMIDVIMM10

3 m HDMI till DVI-D-kabel - M/M

Anslut en HDMI®-kompatibel utdataenhet till en DVI-D-skärm eller en DVI-D-utdataenhet till en HDMI-kompatibel skärm

Ditt pris
€12,99 EUR excl. VAT
€16,24 EUR incl. VAT

Drivers/Downloads

Prata med en rådgivare.

Vi är alltid redo att hjälpa dig med alla dina frågor.

Direktchatt (opens in new window)

Datasheet

Produktsupport

Prata med en rådgivare.

Vi är alltid redo att hjälpa dig med alla dina frågor.

Direktchatt (opens in new window)

Vanliga frågor

Installation

This device is plug and play. It does not use any drivers, and does not require any setup tasks other than plugging in the source (for example, a computer) and the destination (for example, a monitor).

Problemsökning

When you troubleshoot issues with a video adapter, there are some quick tests that you can complete to rule out potential problems. You can test to make sure that the following components are working correctly and are not the source of the issue:

  • Video cables

  • Video adapter

  • Video source (such as a DVD player or computer)

  • Video destination (such as a monitor or projector)

To test your setup components, try the following:

  • Use the cable, video adapter, video source, and video destination in another setup to see if the problem is with the components or the setup.

  • Use a different cable, video adapter, video source, and video destination in your setup to see if the problem persists. Ideally, you should test a component that you know works in another setup.

When you test your cables, it is recommended that you do the following:

  • Test each cable individually.

  • Use short cables when you are testing.

When you test the video source and video destination, it is recommended that you do the following:

  • Remove the video adapter from your setup and test to make sure that the video source and video destination work together without the video adapter.

  • Test to make sure that the video source and video destination work together at the resolution that you want to use.

Note: In order for your setup to work properly, the video source, adapter, and destination all need to support the resolution that you are using.

Try the following:

  1. Check that the monitor’s video port works with another source.
  2. Check that the cables between the source and the destination work with other equipment.
  3. Check whether the video adapter works with another source and another destination.

The error “Out of Range” normally means that the resolution being output by the computer is not compatible with the display. Try lowering the resolution to see if that helps resolve the issue.  You may need to connect another monitor or restart the computer or source to accomplish this.

If a DisplayPort converter with audio is not passing sound from the source to the destination, complete the following:

  1. Make sure that the DisplayPort connection on the video card is the default audio playback device.
  2. Make sure that the video card has the DisplayPort audio codec installed. If not, visit the video card manufacturer's website to find out how to update the video card driver.

Before You Buy

Unfortunately no, this device has an intended source and an intended destination.  Refer to the title of the webpage for this order.

When you convert video from a source that uses DisplayPort or Mini DisplayPort to DVI or HDMI (for example, a computer to a monitor), you will need to consider the difference between passive and active adapters.

If the source supports dual-mode DisplayPort (also known as DP++), then you can use a passive adapter because the source can perform the conversion. If the source does not support DP++, then you need to use an active converter, which includes additional chips to perform the conversion.

Thunderbolt ports support DP++ natively. To run multiple monitors from the same computer, refer to the Active Adapters section below.

Passive Adapters

Passive adapters are less expensive since they do not need to include additional chips. A quick way to check whether you can use a passive adapter is to see if the DisplayPort or Mini DisplayPort source has the DP++ symbol above it. The symbol is a D with a P inside of it, with two + signs to the left, one on top of the other.

Active Adapters

Active adapters use additional chips to make the conversion inside the adapter, regardless of whether the source supports DP++. This means that active adapters are more expensive than passive adapters.

If you want to use multiple monitors with the same computer, you should use an active adapter because some video cards cannot run the maximum number of monitors while using DP++. This is especially true if the computer has more than one DisplayPort or Mini DisplayPort connection. Check with your video card manufacturer to confirm which type of adapter you need for the setup that you would like to run.

Note: You should use passive adapters with StarTech.com MST hubs, except when you are converting from DisplayPort to VGA, since that type of conversion requires active adapters.  For more information on using adapters with StarTech.com MST hubs, refer to the following FAQ: http://www.startech.com/faq/mst_hubs_passive_vs_active_adapters.

Surface Dock

If you experience issues when you connect passive video signal adapters to the Surface Dock, Microsoft recommends that you use active video signal converters instead. StarTech.com offers an active video signal converter for DVI monitors (MDP2DVIS) and for HDMI monitors (MDP2HD4KS).

Note: This issue does not apply to the Surface Pro 3 Docking Station.

Compliance and safety

Compliance letters

  • RoHS
    • Språk: English
  • WEEE
    • Språk: English

Safety Measures

  • If product has an exposed circuit board, do not touch the product under power.
  • If Class 1 Laser Product. Laser radiation is present when the system is open.
  • Wiring terminations should not be made with the product and/or electric lines under power.
  • Product installation and/or mounting should be completed by a certified professional as per the local safety and building code guidelines.
  • Cables (including power and charging cables) should be placed and routed to avoid creating electric, tripping or safety hazards.
* Produkters utseende och specifikationer kan komma att ändras utan förvarning.
Tillbaka till toppen