DVI till HDMI-videoadapter med USB-ström och -audio - 1080p

Anslut en HDMI-skärm eller -projektor till din DVI-D-dator med audio och ström från USB

Produkt ID: DVI2HD

  • Lägger till stereoaudio i 2 kanaler till din HDMI-utgång med USB-audio
  • Problemfri installation plug-and-play-funktion
  • Kristallklar bildkvalitet med stöd för HD-upplösningar på upp till 1080p
Ditt pris
€56,99 EUR excl. VAT
€71,24 EUR incl. VAT

Med denna DVI till HDMI®-adapter kan du ansluta din bärbara eller stationära DVI-dator till en HDMI-skärm eller -projektor. Adaptern fungerar med alla DVI-utgångar, men när du ansluter den till din Windows®-dator stöder adaptern även inbyggd USB-audio så att du kan lägga till din dators audio till HDMI-utsignalen.

Problemfri installation

DVI till HDMI-adaptern är enkel att använda. Adaptern har plug-and-play-installation så att du inte behöver ladda eller ladda ned speciella program, för en snabb och enkel installation. Adaptern har dessutom en liten storlek så att den diskret smälter in på ditt skrivbord till skillnad från otympliga DVI-adapterboxar som tar upp mycket plats på skrivbordet.

Använd bara DVI-anslutningen om du endast vill sända video. Om du vill sända audio och video kan du koppla in USB-kontakten. Eftersom ingen extern strömadapter behövs har du allt du behöver i en kompakt lösning.

Kristallklar HD-video

Denna adapter garanterar att du får ut HD-videokvalitet från din DVI-utgång, med stöd för upplösningar på upp till 1080p. 

DVI2HD täcks av StarTech.coms 3-årsgaranti och gratis livstidsgaranti på teknisk support.

Användning

  • Gör din äldre DVI-enhet kompatibel med en ny HDMI-TV eller -projektor
  • Anslut en DVI-dator till en HDMI-skärm vid din stationära dator eller arbetsstation
  • Konvertera DVI till HDMI och lägg till audio till HDMI-signalen

Partnernummer

  • Ingram Micro Sweden V933741
  • UPC 065030864121

Specifikationer

Warranty Information Warranty 3 Years
Förpackning Fraktvikt (förpackning) 0 g [0,0 oz]
Package Length 0 mm [0,0 in]
Package Width 0 mm [0,0 in]
Package Height 0 mm [0,0 in]
Hårdvara AV-ingång DVI-D
Adapterstil Adaptrar
AV-utgång HDMI
Audio Ja
Chipset-ID LT8522EX - CM108AH
Kontakt(er) 1 - Connector A DVI-D (25-stifts)
1 - Connector B HDMI (19-stifts)
Miljö Drifttemperatur 0°C to 70°C (32°F to 158°F)
Förvaringstemperatur -10°C to 55°C (14°F to 131°F)
Luftfuktighet 40%-50%RH
Prestanda Maximal digital upplösning 1920 x 1080p at 60Hz
Stödda upplösningar 1920x1080 (1080p)
1680x1050 (WSXGA+)
1600x1200
1600x900
1440x900
1400x1050 (SXGA+)
1366x768
1360x768
1280x1024
1280x960
1280x800
1280x768 (WXGA)
1280x720p (720p)
1280x600
1152x864
1024x768
800x600 (SVGA)
640x480 (480p)
Stöd för widescreen Ja
Audio-specifikationer stereoaudio i 2 kanaler
Medeltid mellan fel (MTBF) 1,102,819 timmar
Utseende Produktvikt 0 g [0,0 oz]
Färg Svart
Kabinettyp Av plast
Produktlängd 0 mm [0,0 in]
Produktbredd 0 mm [0,0 in]
Produkthöjd 0 mm [0,0 in]
Vad det är i lådan 1 - Ingår i paketet DVI till HDMI-adapter
Snabbinstallationsguide

Drivers/Downloads

Prata med en rådgivare.

Vi är alltid redo att hjälpa dig med alla dina frågor.

Direktchatt (opens in new window)

Manual(er):

Datasheet

Produktsupport

Prata med en rådgivare.

Vi är alltid redo att hjälpa dig med alla dina frågor.

Direktchatt (opens in new window)

Vanliga frågor

Installation

This device is plug and play. It does not use any drivers, and does not require any setup tasks other than plugging in the source (for example, a computer) and the destination (for example, a monitor).

Problemsökning

When you troubleshoot issues with a video adapter, there are some quick tests that you can complete to rule out potential problems. You can test to make sure that the following components are working correctly and are not the source of the issue:

  • Video cables

  • Video adapter

  • Video source (such as a DVD player or computer)

  • Video destination (such as a monitor or projector)

To test your setup components, try the following:

  • Use the cable, video adapter, video source, and video destination in another setup to see if the problem is with the components or the setup.

  • Use a different cable, video adapter, video source, and video destination in your setup to see if the problem persists. Ideally, you should test a component that you know works in another setup.

When you test your cables, it is recommended that you do the following:

  • Test each cable individually.

  • Use short cables when you are testing.

When you test the video source and video destination, it is recommended that you do the following:

  • Remove the video adapter from your setup and test to make sure that the video source and video destination work together without the video adapter.

  • Test to make sure that the video source and video destination work together at the resolution that you want to use.

Note: In order for your setup to work properly, the video source, adapter, and destination all need to support the resolution that you are using.

Try the following:

  1. Check that the monitor’s video port works with another source.
  2. Check that the cables between the source and the destination work with other equipment.
  3. Check whether the video adapter works with another source and another destination.

The error “Out of Range” normally means that the resolution being output by the computer is not compatible with the display. Try lowering the resolution to see if that helps resolve the issue.  You may need to connect another monitor or restart the computer or source to accomplish this.

Before You Buy

Digital Visual Interface (DVI) is a video display interface that can contain different types of signaling, based on the application. DVI cables and ports are created using different connector types to identify what application they are intended to be used in. The connector types are identified by the number of pins on the DVI connector. DVI comes in the following five different connector types: 

Single and Dual link DVI indicate the maximum resolution capabilities of the video source or video destination. The maximum resolutions are Single Link (1920 x 1080 @ 60Hz) and Dual Link (2560 x 1600 @ 60Hz).

Note: The maximum resolution of your video source and video destination are ultimately determined by the technical specifications of the devices. The connector type is not a definitive indicator of the maximum resolution.

DVI-A carries only analog (for example, VGA) with no digital component. DVI-D carries only digital video (for example, HDMI) with no analog component. DVI-I combines DVI-A and DVI-D connections to include both analog and digital components. A DVI-I port may be on either your video source or display, but whether or not a display carries either or both analog and digital sources depends on the technical specifications of your device.

The DVI to HDMI adapter only converts from DVI to HDMI, which means that the DVI port must be the source and the HDMI port must be the destination.

Compliance and safety

Compliance letters

  • RoHS
    • Språk: English
  • WEEE
    • Språk: English

Safety Measures

  • If product has an exposed circuit board, do not touch the product under power.
  • If Class 1 Laser Product. Laser radiation is present when the system is open.
  • Wiring terminations should not be made with the product and/or electric lines under power.
  • Product installation and/or mounting should be completed by a certified professional as per the local safety and building code guidelines.
  • Cables (including power and charging cables) should be placed and routed to avoid creating electric, tripping or safety hazards.
* Produkters utseende och specifikationer kan komma att ändras utan förvarning.
Tillbaka till toppen