Produkt ID: DVI2VGA
The DVI2VGA DVI to VGA Converter with Scaler allows you to convert a DVI Digital (DVI-D) signal to a VGA signal, saving you time and money by eliminating the need to purchase costly new hardware to make your devices compatible.
The scaler/converter features an easy to use On-Screen Display(OSD) that allows you to take full control of your display and the resolutions you need, in PC or HDTV mode. The OSD also features adjustments for brightness, color, contrast and horizontal/vertical positioning.
The DVI VGA Scaler/converter includes a plastic bracket for wall mounting, or side panel installation.
Backed by a StarTech.com 2-year warranty and free lifetime technical support.
|Warranty Information||Warranty||2 Years|
|Förpackning||Package Length||28 cm [11,0 in]|
|Package Width||18,2 cm [7,2 in]|
|Package Height||72 mm [2,8 in]|
|Fraktvikt (förpackning)||1,1 kg [2,4 lb]|
|Kontakt(er)||1 - Connector A||DVI-I (29-stifts)|
|1 - Connector B||VGA (15-stifts, High Density D-Sub)|
|Prestanda||Maximal analog upplösning||PC Output - 1280x1024 max
HD Output - 1080i/720p max
|Ström||Power Source||AC-adapter medföljer|
|Polaritet på mittpol||Positiv|
|Särskilda anmärkningar/krav||Obs.||Supports RGB, YPbPr, and YCbCr signals (VGA to Component cable not included - See Accessories)|
|Produktlängd||14,6 cm [5,7 in]|
|Produktbredd||77 mm [3,0 in]|
|Produkthöjd||30 mm [1,2 in]|
|Produktvikt||280 g [9,9 oz]|
|Vad det är i lådan||1 - Ingår i paketet||DVI to VGA Converter/Scaler|
|6ft (1.8m) DVI Cable|
Connect a VGA output (video card, etc.) to a display/monitor that uses Component video input
Connect your VGA monitor with the highest quality connection available
Anslut din VGA-skärm med anslutning av högsta tillgängliga kvalitet.
Ger en kristallklar anslutning med hög hastighet mellan dina digitala DVI-enheter
This device is plug and play. It does not use any drivers, and does not require any setup tasks other than plugging in the source (for example, a computer) and the destination (for example, a monitor).
When you troubleshoot issues with a video adapter, there are some quick tests that you can complete to rule out potential problems. You can test to make sure that the following components are working correctly and are not the source of the issue:
Video source (such as a DVD player or computer)
Video destination (such as a monitor or projector)
To test your setup components, try the following:
Use the cable, video adapter, video source, and video destination in another setup to see if the problem is with the components or the setup.
Use a different cable, video adapter, video source, and video destination in your setup to see if the problem persists. Ideally, you should test a component that you know works in another setup.
When you test your cables, it is recommended that you do the following:
Test each cable individually.
Use short cables when you are testing.
When you test the video source and video destination, it is recommended that you do the following:
Remove the video adapter from your setup and test to make sure that the video source and video destination work together without the video adapter.
Test to make sure that the video source and video destination work together at the resolution that you want to use.
Note: In order for your setup to work properly, the video source, adapter, and destination all need to support the resolution that you are using.
Try the following:
The error “Out of Range” normally means that the resolution being output by the computer is not compatible with the display. Try lowering the resolution to see if that helps resolve the issue. You may need to connect another monitor or restart the computer or source to accomplish this.
Unfortunately no, this device has an intended source and an intended destination. Refer to the title of the webpage for this order.