DVI till VGA-konverterare för video med hög upplösning

Konvertera en DVI-D-signal (digital) så att den fungerar med en VGA-skärm

Produkt ID: DVI2VGACON

  • Stöder upplösningar på upp till 1920x1200
  • Kompakt formfaktor
  • 30 cm (305 mm) DVI-D-kabel medföljer
Ditt pris
€126,99 EUR excl. VAT
€158,74 EUR incl. VAT

DVI2VGACON DVI till VGA-konverteraren för video med hög upplösning konverterar en DVI-D-videosignal (digital) till en VGA-utgång (analog) och sparar tid och pengar genom att eliminera behovet av en ny digital skärm som fungerar med DVI-D-videokort.

Denna kompakta adapter ger stöd för upplösningar på upp till 1920x1200 och låter dig utnyttja VGA-skärmens förmågor till fullo. DVI-D till VGA-adaptern är enkel att installera med sin plug-and-play-funktion; anslut bara DVI-D-utdataporten till adaptern med den medföljande DVI-kabeln och VGA-skärmen/projektorn till VGA-porten på adaptern.

Täcks av StarTech.coms 2-årsgaranti och gratis livstidsgaranti på teknisk support.

Användning

  • Ett bra sätt att använda äldre skärmar med en nyare signalkälla
  • Anslut din DVI videokälla (t.ex. kabel eller satellit set-top-box, dator) till en VGA- eller HDTV-skärm
  • DVI-D till VGA-adaptern konverterar DVI-D-videoindata till analog VGA-utdata. En DVI-källa kan visas på en VGA- eller HDTV-skärm med en VGA-kontakt

Fördelarna med StarTech.com

  • DVI digital till VGA-konvertering stöder många upplösningar från DVI-källan och du slipper kostnaden och krånglet med att köpa nya enheter för kompatibilitet
  • Ingen konfiguration eller drivrutin behövs till den enkla installationen som bara tar ett par minuter
  • Kompakt enhet som enkelt kan stuvas undan vid källenheten eller skärmen

Partnernummer

  • ALSO Sweden 000000000002764180
  • UPC 065030836081

Specifikationer

Warranty Information Warranty 2 Years
Förpackning Package Height 0 mm [0,0 in]
Package Length 0 mm [0,0 in]
Fraktvikt (förpackning) 0 g [0,0 oz]
Package Width 0 mm [0,0 in]
Hårdvara Active or Passive Adapter Aktiv
AV-ingång DVI-D
AV-utgång VGA
Audio Nej
Kontakt(er) 1 - Connector A DVI-I (29-stifts)
1 - Connector B VGA (15-stifts, High Density D-Sub)
Miljö Drifttemperatur 0°C to 40°C (32°F to 104°F)
Förvaringstemperatur -20°C to 60°C (-4°F to 140°F)
Luftfuktighet 0~80 % RH
Prestanda Maximal analog upplösning 1920x1200
Stöd för widescreen Ja
Ström Power Source Strömförsörjd via USB
Utspänning 5 DC
Polaritet på mittpol Positiv
Utseende Produktvikt 0 g [0,0 oz]
Färg Svart
Produktlängd 0 mm [0,0 in]
Produktbredd 0 mm [0,0 in]
Produkthöjd 0 mm [0,0 in]
Vad det är i lådan 1 - Ingår i paketet DVI till VGA-videokonverterare
DVI-kabel
USB till DC-strömkabel
Användarhandbok

Tillbehör

USB2TYPEM

USB till 5,5 mm strömkabel - cylindrisk kontakt av typ M - 91 cm

Strömförse dina 5 V DC-enheter via din dators USB-port

Ditt pris
€3,99 EUR excl. VAT
€4,99 EUR incl. VAT
MXT101MMHQ

1,8 m koaxialvideokabel för VGA-skärm med hög upplösning - HD15 till HD15 M/M

Anslut din VGA-skärm med anslutning av högsta tillgängliga kvalitet.

Ditt pris
€8,99 EUR excl. VAT
€11,24 EUR incl. VAT
MXT101MMHQ10

10 ft Coax High Resolution VGA Monitor Cable HD15 M/M

Connect your VGA monitor with the highest quality connection available

Ditt pris
€12,99 EUR excl. VAT
€16,24 EUR incl. VAT
MXT105MMHQ

4,5 m koaxialkabel för VGA-skärm med hög upplösning, HD15 M/M

Anslut din VGA-skärm med anslutning av högsta tillgängliga kvalitet.

Ditt pris
€16,99 EUR excl. VAT
€21,24 EUR incl. VAT
DVIMM6

1,8 m DVI-D Single Link LCD platt bildskärmskabel - M/M

Ger en kristallklar anslutning med hög hastighet mellan dina digitala DVI-enheter

Ditt pris
€9,99 EUR excl. VAT
€12,49 EUR incl. VAT
DVIDSMM10

10 ft DVI-D Single Link Cable - M/M

Provide a high-speed, crystal-clear connection to your DVI digital devices

Ditt pris
€12,99 EUR excl. VAT
€16,24 EUR incl. VAT
DVIDSMM15

15 ft DVI-D Single Link Cable - M/M

Provide a high speed, crystal clear connection between your DVI digital devices

Ditt pris
€19,99 EUR excl. VAT
€24,99 EUR incl. VAT

Drivers/Downloads

Prata med en rådgivare.

Vi är alltid redo att hjälpa dig med alla dina frågor.

Direktchatt (opens in new window)

Manual(er):

Datasheet

Produktsupport

Prata med en rådgivare.

Vi är alltid redo att hjälpa dig med alla dina frågor.

Direktchatt (opens in new window)

Vanliga frågor

Installation

This device is plug and play. It does not use any drivers, and does not require any setup tasks other than plugging in the source (for example, a computer) and the destination (for example, a monitor).

Problemsökning

When you troubleshoot issues with a video adapter, there are some quick tests that you can complete to rule out potential problems. You can test to make sure that the following components are working correctly and are not the source of the issue:

  • Video cables

  • Video adapter

  • Video source (such as a DVD player or computer)

  • Video destination (such as a monitor or projector)

To test your setup components, try the following:

  • Use the cable, video adapter, video source, and video destination in another setup to see if the problem is with the components or the setup.

  • Use a different cable, video adapter, video source, and video destination in your setup to see if the problem persists. Ideally, you should test a component that you know works in another setup.

When you test your cables, it is recommended that you do the following:

  • Test each cable individually.

  • Use short cables when you are testing.

When you test the video source and video destination, it is recommended that you do the following:

  • Remove the video adapter from your setup and test to make sure that the video source and video destination work together without the video adapter.

  • Test to make sure that the video source and video destination work together at the resolution that you want to use.

Note: In order for your setup to work properly, the video source, adapter, and destination all need to support the resolution that you are using.

Try the following:

  1. Check that the monitor’s video port works with another source.
  2. Check that the cables between the source and the destination work with other equipment.
  3. Check whether the video adapter works with another source and another destination.

The error “Out of Range” normally means that the resolution being output by the computer is not compatible with the display. Try lowering the resolution to see if that helps resolve the issue.  You may need to connect another monitor or restart the computer or source to accomplish this.

Before You Buy

Unfortunately no, this device has an intended source and an intended destination.  Refer to the title of the webpage for this order.

This is an active video signal converter.  

A passive video signal converter changes the type of connection that is being used but does not change the signal that passes through the converter. Because the video signal is not modified, passive converters tend to be smaller, simpler, and less expensive than active video signal converters. Examples of passive converters include DVI-I to VGA, HDMI to DVI, and DisplayPort to Mini-DisplayPort converters.

An active video signal converter modifies both the type of connection that is being used and the signal that passes through the converter. Because this type of conversion can be complex, active converters tend to be larger than passive video signal converters and sometimes require additional power. Examples of active converters include DVI-D to VGA, HDMI to DisplayPort, and VGA to HDMI converters.

For more information about passive and active DisplayPort video signal converters, refer to the following FAQ: https://www.startech.com/faq/DisplayPort_Converter_DP_Multi_Mode.

For more information about which type of video signal converter you should use when you convert video signals with an MST hub, refer to the following FAQ: https://www.startech.com/faq/mst_hubs_passive_vs_active_adapters.

Digital Visual Interface (DVI) is a video display interface that can contain different types of signaling, based on the application. DVI cables and ports are created using different connector types to identify what application they are intended to be used in. The connector types are identified by the number of pins on the DVI connector. DVI comes in the following five different connector types: 

Single and Dual link DVI indicate the maximum resolution capabilities of the video source or video destination. The maximum resolutions are Single Link (1920 x 1080 @ 60Hz) and Dual Link (2560 x 1600 @ 60Hz).

Note: The maximum resolution of your video source and video destination are ultimately determined by the technical specifications of the devices. The connector type is not a definitive indicator of the maximum resolution.

DVI-A carries only analog (for example, VGA) with no digital component. DVI-D carries only digital video (for example, HDMI) with no analog component. DVI-I combines DVI-A and DVI-D connections to include both analog and digital components. A DVI-I port may be on either your video source or display, but whether or not a display carries either or both analog and digital sources depends on the technical specifications of your device.

Compliance and safety

Compliance letters

  • RoHS
    • Språk: English
  • WEEE
    • Språk: English

Safety Measures

  • If product has an exposed circuit board, do not touch the product under power.
  • If Class 1 Laser Product. Laser radiation is present when the system is open.
  • Wiring terminations should not be made with the product and/or electric lines under power.
  • Product installation and/or mounting should be completed by a certified professional as per the local safety and building code guidelines.
  • Cables (including power and charging cables) should be placed and routed to avoid creating electric, tripping or safety hazards.
* Produkters utseende och specifikationer kan komma att ändras utan förvarning.
Tillbaka till toppen