Utgått

HDMI via IP-förlängare med audio

Anslut till och dela en HDMI®-skärm eller -projektor via ett IP-nätverk

Produkt ID: IPUSB2HD2

  • HDMI® via IP-konvertering ger delad åtkomst över ett nätverk
  • Stöder upplösningar på upp till 1920x1080 (1080p)
  • Audio via HDMI eller 3,5 mm anslutning

IPUSB2HD2 HDMI® via IP-förlängare ger en mångsidig HDMI-IP-länk mellan datorer i ditt nätverk och en HDMI-skärm/-projektor med äkta högupplöst videoupplösning (1080p, 1920x1080). Bifogade ljudsignaler sänds direkt genom HDMI-uttaget eller separat via den inbyggda 3,5 mm stereoutdataporten.

Idealiskt för att dela en skärm eller en projektor via ett Ethernet-nätverk det går till och med att koppla PC-datorer som saknar uttag för digitalvideo. IP/HDMI-adaptern kan kommunicera via en nätverksrouter vid överföringsavstånd på upp till 100 m. Dessutom har den två USB 2.0-portar på skärmens sida där man kan ansluta och dela kringutrustning som USB-minnen eller -tangentbord/-möss med den anslutna datorn.

Alternativt kan enheten användas direkt som en USB till HDMI-adapter.

How it works diagram

Täcks av StarTech.coms 2-årsgaranti och gratis livstidsgaranti på teknisk support.

Användning

  • Anslut flera datorer till en skärm/projektor inom ett lokalt nätverk (LAN) och växla mellan datorerna under föredrag inom företaget
  • Med alternativet HDMI® via IP är avstånd inte längre något problem för att leverera högupplöst video och ljud till din publik, i handeln och applikationer för digital skyltning
  • Hemmabio- eller mediacenter-applikationer, inklusive strömning av filmer och foton samt internetsurfning till din HDTV
  • Styr din PC från en fjärrplats genom att ansluta ett tangentbord eller en mus till de integrerade USB-portarna
  • Använd i utbildningssammanhang där elever kan ansluta och visa sina arbeten på en central skärm eller projektorskärm så att alla kan se

Fördelarna med StarTech.com

  • Att välja USB till HDMI eller HDMI via IP ger maximal flexibilitet för applikationer där en PC till HDMI-anslutning krävs
  • Två integrerade USB-portar för att ansluta kringutrustning på skärmen/fjärrsidan ger flexibilitet att styra eller kommunicera med källdatorn på avstånd
  • Ljudstöd när man använder USB till HDMI-konverteringsfunktionen ger en komplett HDMI-lösning som passar alla tillämpningar

Partnernummer

  • UPC 065030844383

Kompatibilitet

  • Windows 7 logo
  • Windows 8 logo
Windows® 11, 10 (32/64)
8 / 8.1 (32/64)
7 (32/64)
Vista (32/64)
XP (32/64)

Specifikationer

Warranty Information Warranty 2 Years
Förpackning Package Length 22,5 cm [8,9 in]
Package Width 15 cm [5,9 in]
Package Height 60 mm [2,4 in]
Fraktvikt (förpackning) 0,5 kg [1,0 lb]
Hårdvara Portar 1
AV-ingång Ethernet
USB 2.0
AV-utgång HDMI
Kablage Cat 5 UTP or better
Audio Yes
Chipset-ID DisplayLink - DL-165
Kedjekoppling No
Kontakt(er) 1 - Kontakttyp(er) USB Mini-B (5 pin)
RJ-45
HDMI (19 pin)
2 - Kontakttyp(er) USB Type-A (4 pin) USB 2.0
3.5 mm Mini-Jack (3 Position)
Miljö Drifttemperatur 0°C ~ 70°C (32°F ~ 158°F)
Förvaringstemperatur 0°C ~ 85°C (32°F ~ 185°F)
Luftfuktighet 10~80 % RH
Mjukvara OS-kompatibilitet Windows® 11, 10 (32/64)
8 / 8.1 (32/64)
7 (32/64)
Vista (32/64)
XP (32/64)
Microsoft WHQL-certifierad Yes
Prestanda Maximal dataöverföringshastighet USB – 480 Mbps
Ethernet - 1 Gbps (1000 Mbps)
Maximalt avstånd 100 m / 330 ft
Maximal digital upplösning 1080p / 1920x1080
Stöd för widescreen Yes
Allmänna specifikationer Denna USB-videoadapter använder ett DisplayLink-chipset. Om du ansluter denna enhet till en dator tillsammans med extra USB-videoadaptrar eller -dockningsstationer, undvik att använda enheter med ett Trigger- eller Fresco-chipset.
Ström Power Source AC Adapter Included
Inspänning 110V-240V AC
Inström 0.3A
Utspänning 5 DC
Utström 2A
Polaritet på mittpol Positive
Utseende Färg Black
Kabinettyp Plastic
Produktlängd 13,2 cm [5,2 in]
Produktbredd 71 mm [2,8 in]
Produkthöjd 2,8 cm [1,1 in]
Produktvikt 134 g [4,7 oz]
Vad det är i lådan 1 - Ingår i paketet IP eller USB till HDMI-konverterare
Universell strömadapter (US/UK/EU/AUS)
CD med drivrutiner och program
Instruktionsbok

Tillbehör

Utgått
HDMIMM10

10 ft High Speed HDMI Cable - HDMI- M/M

Provides a high speed connection between HDMI®-enabled devices

Ditt pris
€16,99 EUR excl. VAT
€21,24 EUR incl. VAT
Utgått
HDMIMM6

6 ft High Speed HDMI Cable – Ultra HD 4k x 2k HDMI Cable – HDMI to HDMI M/M

Create Ultra HD connections between your High Speed HDMI®-equipped devices

Ditt pris
€10,99 EUR excl. VAT
€13,74 EUR incl. VAT
SVA5M3NEUA

DC-strömadapter - 5 V, 3 A

Byt ut din borttappade eller trasiga strömadapter

Ditt pris
€21,99 EUR excl. VAT
€27,49 EUR incl. VAT

Drivers/Downloads

Prata med en rådgivare.

Vi är alltid redo att hjälpa dig med alla dina frågor.

Direktchatt (opens in new window)

Drivrutin(er):

Manual(er):

Mjukvara

Datasheet

Produktsupport

Prata med en rådgivare.

Vi är alltid redo att hjälpa dig med alla dina frågor.

Direktchatt (opens in new window)

Vanliga frågor

Installation

To get the highest quality signal from your source to your display when you use an HDMI extender, do the following:

  • Make sure that the HDMI versions of the source, extender, and destination are compatible. For example, if you require 3D support, make sure that all of the devices can support 3D over HDMI.

  • Use the least amount of adapters, splitters, or converters as possible. Each device that you use in your setup creates additional points of potential failure and creates more steps for an HDCP key to hop through, which may cause issues with older displays. For more information on HDCP, refer to the following FAQ: http://www.startech.com/faq/video_signal_converters_HDCP.

  • Use an HDMI extender that exceeds the requirements of the setup. For example, if you need to extend the signal 200 feet, it is best to use an extender capable of more than 200 feet.

  • Make sure that all of the CAT 5/6 runs are as straight as possible, with the least amount of coiling.

  • Make sure that all of the patches, wall jacks, and cables use the highest possible CAT specification, (for example, CAT 6), and were tested to conform to the standard.

  • Use patches, wall jacks, and cables with the same pin configuration. For more information on T568A versus T568B wiring, refer to the following FAQ: http://www.startech.com/faq/network_cables_a_vs_b_pinout.

  • Keep the cabling away from sources of high noise.

  • Make sure that you use adequate electrical grounding in your setup.

Before you install the device, make sure that your operating system is current (for example, the most recent service pack is installed).

  1. Download the latest drivers from the StarTech.com website at http://www.startech.com/Support. The part number and product ID are on the product packaging.

Note: Windows usually saves the files to the Downloads folder that is associated with your user account (for example, C:\Users\your_name\Downloads).

  1. After the download is complete, right-click the zip folder that you downloaded, click Extract All, and complete the instructions.
  2. In the list of extracted files, right-click the Driver-Setup.exe file and click Run as Administrator.

Note: If the Run as Administrator option is not available, you might be trying to run the installer from within the zipped file. Complete the instructions in step 2 to extract the files.

  1. Complete the instructions to install the device drivers, and restart your computer when prompted to.

To install the USB Server software, complete the following:

  1. In the list of extracted files, open the Windows folder.
  2. In the App folder, right-click the USBServer_Setup file and click Run as Administrator.

Note: If the Run as Administrator option is not available, you might be trying to run the installer from within the zipped file. Complete the instructions above to extract the files.

  1. Complete the instructions to install the USB Server, and restart your computer when prompted to.

For information on configuring the USB Server software, refer to the following FAQ: http://www.startech.com/faq/ipusb2vga_ipusb2hd2_usb_server_software

Before you install the device, make sure that your operating system is current (for example, the most recent service pack is installed).

  1. Download the latest drivers from the StarTech.com website at http://www.startech.com/Support. The part number and product ID are on the product packaging.

Note: Windows usually saves the files to the Downloads folder that is associated with your user account (for example, C:\Documents and Settings\your_name\My Documents\Downloads).

  1. After the download is complete, right-click the zip folder that you downloaded, click Extract All, and complete the instructions.

  2. In the list of extracted files, double-click the Driver-Setup file.

  3. Complete the instructions to install the device drivers.

  4. When prompted to, restart your computer.

 

To install the USB Server, complete the following:

  1. In the list of extracted files, open the Windows folder.

  2. Navigate to the App folder.

  3. Double-click the USBServer_Setup file.

  4. Complete the instructions to install the USB Server.

  5. When prompted to, restart your computer.

For information on configuring the USB Server software, refer to the following FAQ: http://www.startech.com/faq/ipusb2vga_ipusb2hd2_usb_server_software

Prior to installing this device, ensure that your operating system is up to date (for example, you have installed the most recent service pack).

To install the USB Server software:

  1. Download the latest software package from the StarTech.com website (http://www.startech.com/Support). You can find the part number and product ID on the product’s packaging.

Note: Windows will typically save the files to the Downloads folder that is associated with your user account (for example, C:\Users\your_name\Downloads).

  1. Once the download is complete, right-click the zip folder that you downloaded, select Extract All, and follow the on-screen instructions.
  2. Select the appropriate folder for your operating system.
  3. Right-click Setup.exe
  4. Click Run as Administrator.

Note: If the Run as Administrator option is not available, you might be attempting to run the installer from within the zipped file. Extract the files using the instructions in Step 2.

  1. Follow the on-screen prompts to install the software and restart the computer when prompted.
  2. Your computer will automatically complete the software installation and your device should be ready to use.

Set up the software

Confirm that the extender is on the same network as your computer. If you are using a network with DHCP, you do not need to configure anything further.

If you are using an Ethernet cable to connect to the unit or you are using a network without DHCP, you need to change the IP address on your computer to the default IP network of the IP device server. Change the IP address of your system to 192.168.1.XXX, where XXX is a number between 1 and 49.

Note: The default IP address of the extender is 192.168.1.50 on the default subnet mask of 255.255.255.0.

USB Server software

Your extender is detected by the USB Server software when the software is launched.

Note: It may take a few minutes for the server to appear in the software.

When the extender appears in the list (for example, USB2HDMI), click either the display or media device associated with the server. Click on one of the devices and then click Connect Device.

When the USB Server software configuration is complete, the display and media devices are connected to your system as though the devices are installed locally. By default, Windows creates an extended desktop for the display, which you can reconfigure in the control panel.

Problemsökning

Om maskinvaruacceleration är aktiverat på ett program kan det orsaka sämre resurshantering och begränsa prestandan på din videoenhet. Om detta problem uppstår bör du avaktivera maskinvaruacceleration på de program som påverkas. 

För att avaktivera maskinvaruacceleration på vanliga program och operativsystem, utför en av följande serier med steg beroende på vilka program eller vilket operativsystem du använder.

Internet Explorer 9 och senare

Obs.: Tidigare versioner av Internet Explorer använder inte maskinvaruacceleration.

  1. Klicka på Start-knappen.
  2. Öppna Kontrollpanelen.
  3. Klicka på Nätverk och Internet.
  4. Klicka på Internetalternativ.
  5. Klicka på fliken Avancerat.
  6. Bläddra fram till skärmen Accelererad grafik.
  7. Välj Använd programvarurendering istället för GPU-rendering.
  8. Klicka på Verkställ.
  9. Starta om datorn.

Mozilla Firefox

  1. Öppna Firefox.
  2. Tryck på Alt-tangenten.
  3. Klicka på Verktyg och Inställningar.
  4. Klicka på Avancerat.
  5. Klicka på fliken Allmänt.
  6. Under Webbläsning, klicka ur Använd om möjligt hårdvaruacceleration.
  7. Klicka på OK.
  8. Starta om webbläsaren.

Google Chrome

  1. Öppna Google Chrome.
  2. Klicka på Inställningar-knappen (den har tre horisontella linjer).
  3. Klicka på Inställningar.
  4. Klicka på Visa avancerade inställningar.
  5. Skrolla ner till skärmens slut och klicka ur Använd maskinvaruacceleration när det är tillgängligt.
  6. Starta om webbläsaren.

Microsoft Office 2013 / 2010

  1. Öppna ett program i Microsoft Office (t.ex. Microsoft Word).
  2. Klicka på fliken Fil.
  3. I menyn på skärmens vänstra sida, klicka på Alternativ.
  4. Klicka på Avancerat.
  5. Under Visa, välj Inaktivera maskinvaruacceleration för grafik.
  6. Stäng och starta om alla Microsoft Office-program som var öppna.

Windows 10 / 8

  1. Tryck ner Windows-tangenten +X.
  2. Klicka på Kontrollpanelen.
  3. Klicka på Anpassning.
  4. Välj ett tema med hög kontrast.

Windows 7 / Vista

  1. Klicka på Start-knappen.
  2. Klicka på Kontrollpanelen.
  3. Klicka på Anpassning.
  4. Välj ett icke-Aero-tema. Helst borde du välja ett bastema med hög kontrast.

Windows XP

  1. Klicka på Start-knappen.
  2. Öppna Kontrollpanelen.
  3. Välj Bildskärm.
  4. Klicka på fliken Inställningar.
  5. Klicka på Avancerat.
  6. Klicka på fliken Felsökning.
  7. Flytta Maskinvaruaccelerationens skjutreglage till Ingen.
  8. Starta om datorn.

When you troubleshoot issues with a video extender, there are some quick tests that you can complete to rule out potential problems. You can test to make sure that the following components are working correctly and are not the source of the issue:

  • Video and Ethernet cables

  • Video extender

  • Video source (such as a DVD player or computer)

  • Video destination (such as a monitor or projector)

Note: When you are testing setup components, you should avoid using video adapters. For example, if you are converting a VGA source to HDMI for use with an HDMI extender, you should use an HDMI source when you test the components.

To test your setup components, try the following:

  • Use the cable, video extender, video source, and video destination in another setup to see if the problem is with the components or the setup.

  • Use a different cable, video extender, video source, and video destination in your setup to see if the problem persists. Ideally, you should test a component that you know works in another setup.

When you test your cables, it is recommended that you do the following:

  • Test each cable individually.

  • Use short cables when you are testing.

When you test the video source and video destination, it is recommended that you do the following:

  • Remove the video extender from your setup and test to make sure that the video source and video destination work together without the video extender.

  • Test to make sure that the video source and video destination work together at the resolution that you want to use.

Note: In order for your setup to work properly, the video source, extender, and destination all need to support the resolution that you are using.

If the device is not detected in the USB Server software, complete the following:

  • Make sure that the computer is on the same network as the device.
  • By default, the device uses DHCP. On a network that is plug-and-play, the device is assigned an IP address by the DHCP server and is detected by a computer that is on the same network as the device.
  • To troubleshoot the device, connect it directly to a computer on the 192.168.1 network. For more information about configuring the USB Server software, refer to the following FAQ: http://www.startech.com/faq/ipusb2vga_ipusb2hd2_usb_server_software.
  • If the network configuration of the device was changed, you cannot complete a hardware reset to put the unit back on 192.168.1.50. Instead, you need to obtain the static IP address from the person who modified the server.
  • Wait 5 minutes for the USB Server software to detect the device.
  • Move the device to a less congested network.

There may be several reasons that the display on the IP video extender is black. To determine the cause of the issue, try the following:

  • Make sure that the USB Server software was installed and configured properly, and that the displays are detected. For more information about configuring the USB Server software, refer to the following FAQ: http://www.startech.com/faq/ipusb2vga_ipusb2hd2_usb_server_software.
  • Make sure that the USB Server software detects the IP video extender. For more information about troubleshooting issues with the USB Server software, refer to the following FAQ: http://www.startech.com/faq/ipusb2vga_ipusb2hd2_loss_of_network_connection..
  • Confirm that the network equipment that you are using is capable of gigabit speeds.
  • In the control panel on your computer, make sure that a compatible resolution is being sent to the monitor.
  • Make sure that the display is set to the correct input. Some displays have multiple inputs that you can switch between. 
  • Make sure that the background is not black.

Before You Buy

You should only use video converters and extenders if it is absolutely necessary to do so. In many cases, most video converters and extenders are not necessary if you purchase the correct cable.

The following table lists the maximum length of cable for common video standards.

Video standard Maximum length
DisplayPort 50 ft. (15.2m)
HDMI 50 ft. (15.2m)
DVI 50 ft. (15.2m)
VGA 200 ft. (71m)

Note: StarTech.com offers cables longer than what is listed above, including active cables, which typically include built-in active signal boosters that allow for longer cables. Active cables are specifically designed to exceed the suggested maximum lengths and are tested at the listed specifications (for example, the maximum listed resolution).

Video adapters

Video adapters passively adapt a cable from one connector type to another. Video adapters do not change the signal type, or change the video standard.

Examples of common applications for adapters include the following:

  • DVI-I to VGA

  • RCA to BNC

  • Mini DisplayPort to DisplayPort

  • Couplers (female to female, or male to male)

Note: You can use a coupler to extend a cable for a short distance. However, each coupler that you use can introduce signal loss, which degrades the signal quality.

Video converters

Video converters actively process and change the signal type from one video standard and convert it to another standard. They are typically used to convert digital to analog and vice versa, but can be used to convert a digital signal to another digital video standard (for example, HDMI to DisplayPort).

Video converters work over short distances from the source to the destination: up to 15 feet or 3 meters.

Video extenders

Video extenders convert an input signal to a higher voltage for transmission over longer distances and then convert the input signal back to the original video standard. The input and the output signal will match on a video extender, as the same video standard is maintained end-to-end. If a cable is extended with adapters or converters, the signal quality degrades.

Note: For more information on using a video adapter or converter with a video extender, see the following FAQ: http://www.startech.com/faq/video_signal_converters_convert_then_extend.

Compliance and safety

Compliance letters

Safety Measures

  • If product has an exposed circuit board, do not touch the product under power.
  • If Class 1 Laser Product. Laser radiation is present when the system is open.
  • Wiring terminations should not be made with the product and/or electric lines under power.
  • Product installation and/or mounting should be completed by a certified professional as per the local safety and building code guidelines.
  • Cables (including power and charging cables) should be placed and routed to avoid creating electric, tripping or safety hazards.
* Produkters utseende och specifikationer kan komma att ändras utan förvarning.
Vänta...
Tillbaka till toppen