Utgått

Mini DisplayPort till HDMI aktiv video- och audio-adapter – Mini DP till HDMI – 1920x1200 – Vit

Anslut en HDMI®-skärm till en mini DisplayPort®-videokälla i enkelläge

Produkt ID: MDP2HDSW

  • Stöder skärmupplösningar på upp till 1920x1200 (WUXGA)
  • Kompatibelt med DisplayPort 1.1a, HDCP 1.3
  • Kompatibel med Intel® Thunderbolt™ med DisplayPort-utsignal

Den vita adaptern MDP2HDSW för anslutning mellan Mini DisplayPort® och HDMI® har stöd för ljudgenomströmning och låter dig ansluta både audio och video från den Mini DisplayPort-utrustade stationära eller bärbara datorn till en HDMI-skärm eller -projektor.

Denna vita adapter i stilren design för anslutning mellan Mini DisplayPort och HDMI är idealisk för Mac-användare.

Till skillnad från passiva adaptrar konverterar MDP2HDS Mini DisplayPort-utdata i enkelläge och dubbelläge aktivt, vilket är idealiskt för grafikkort som inte skickar signaler i enkelläge/multiläge (DP++) som t.ex. ATI™ Eyefinity-kort.

Denna aktiva adapter för anslutning mellan Mini DP och HDMI® är kompatibel med Intel® Thunderbolt™-utdata vid anslutning direkt till en DisplayPort över Thunderbolt I/O-port.

Täcks av StarTech.coms 3-årsgaranti och gratis livstidsgaranti på teknisk support.

Användning

  • Återanvänd en befintlig HDMI-skärm eller projektor med en ny mini DisplayPort-utrustad dator eller som en sekundär skärm
  • Använd HDMI®-bildskärmen som en andra bildskärm

Fördelarna med StarTech.com

  • Stödjer både multiläges (DP++) och enkelläges DisplayPort-utsignaler via aktiv Mini DisplayPort®-konvertering
  • Vit stilren design idealisk för Mac-användare

Partnernummer

  • UPC 065030849500

Specifikationer

Warranty Information Warranty 3 Years
Förpackning Package Length 22 cm [8,7 in]
Package Width 20 cm [7,9 in]
Package Height 20 mm [0,8 in]
Fraktvikt (förpackning) 0 g [0,0 oz]
Hårdvara Active or Passive Adapter Aktiv
AV-ingång Mini DisplayPort - 1.2
Adapterstil Adaptrar
AV-utgång HDMI - 1.4
Audio Ja
Industristandarder HDCP
DisplayPort 1.1
Kontakt(er) 1 - Connector A Mini-DisplayPort (20-stifts)
1 - Connector B HDMI (19-stifts)
Miljö Drifttemperatur 0°C to 60°C (32°F to 140°F)
Förvaringstemperatur 0°C to 70°C (32°F to 158°F)
Luftfuktighet 40 %-85 %RH
Prestanda Audio-specifikationer HDMI - 7.1 Channel Audio
Maximum Cable Distance To Display 15,2 m [49,9 ft]
Maximal digital upplösning 1920x1200
Stöd för widescreen Ja
Utseende Färg Vit
Produktlängd 21,1 cm [8,3 in]
Produktbredd 40 mm [1,6 in]
Produkthöjd 15 mm [0,6 in]
Produktvikt 0 g [0,0 oz]
Vad det är i lådan 1 - Ingår i paketet Aktiv adapter för anslutning mellan Mini DisplayPort® och HDMI®

Drivers/Downloads

Prata med en rådgivare.

Vi är alltid redo att hjälpa dig med alla dina frågor.

Direktchatt (opens in new window)

Datasheet

Produktsupport

Prata med en rådgivare.

Vi är alltid redo att hjälpa dig med alla dina frågor.

Direktchatt (opens in new window)

Vanliga frågor

Installation

This device is plug and play. It does not use any drivers, and does not require any setup tasks other than plugging in the source (for example, a computer) and the destination (for example, a monitor).

Problemsökning

When you troubleshoot issues with a video adapter, there are some quick tests that you can complete to rule out potential problems. You can test to make sure that the following components are working correctly and are not the source of the issue:

  • Video cables

  • Video adapter

  • Video source (such as a DVD player or computer)

  • Video destination (such as a monitor or projector)

To test your setup components, try the following:

  • Use the cable, video adapter, video source, and video destination in another setup to see if the problem is with the components or the setup.

  • Use a different cable, video adapter, video source, and video destination in your setup to see if the problem persists. Ideally, you should test a component that you know works in another setup.

When you test your cables, it is recommended that you do the following:

  • Test each cable individually.

  • Use short cables when you are testing.

When you test the video source and video destination, it is recommended that you do the following:

  • Remove the video adapter from your setup and test to make sure that the video source and video destination work together without the video adapter.

  • Test to make sure that the video source and video destination work together at the resolution that you want to use.

Note: In order for your setup to work properly, the video source, adapter, and destination all need to support the resolution that you are using.

Try the following:

  1. Check that the monitor’s video port works with another source.
  2. Check that the cables between the source and the destination work with other equipment.
  3. Check whether the video adapter works with another source and another destination.

The error “Out of Range” normally means that the resolution being output by the computer is not compatible with the display. Try lowering the resolution to see if that helps resolve the issue.  You may need to connect another monitor or restart the computer or source to accomplish this.

If a DisplayPort converter with audio is not passing sound from the source to the destination, complete the following:

  1. Make sure that the DisplayPort connection on the video card is the default audio playback device.
  2. Make sure that the video card has the DisplayPort audio codec installed. If not, visit the video card manufacturer's website to find out how to update the video card driver.

Before You Buy

Unfortunately no, this device has an intended source and an intended destination.  Refer to the title of the webpage for this order.

When you convert video from a source that uses DisplayPort or Mini DisplayPort to DVI or HDMI (for example, a computer to a monitor), you will need to consider the difference between passive and active adapters.

If the source supports dual-mode DisplayPort (also known as DP++), then you can use a passive adapter because the source can perform the conversion. If the source does not support DP++, then you need to use an active converter, which includes additional chips to perform the conversion.

Thunderbolt ports support DP++ natively. To run multiple monitors from the same computer, refer to the Active Adapters section below.

Passive Adapters

Passive adapters are less expensive since they do not need to include additional chips. A quick way to check whether you can use a passive adapter is to see if the DisplayPort or Mini DisplayPort source has the DP++ symbol above it. The symbol is a D with a P inside of it, with two + signs to the left, one on top of the other.

Active Adapters

Active adapters use additional chips to make the conversion inside the adapter, regardless of whether the source supports DP++. This means that active adapters are more expensive than passive adapters.

If you want to use multiple monitors with the same computer, you should use an active adapter because some video cards cannot run the maximum number of monitors while using DP++. This is especially true if the computer has more than one DisplayPort or Mini DisplayPort connection. Check with your video card manufacturer to confirm which type of adapter you need for the setup that you would like to run.

Note: You should use passive adapters with StarTech.com MST hubs, except when you are converting from DisplayPort to VGA, since that type of conversion requires active adapters.  For more information on using adapters with StarTech.com MST hubs, refer to the following FAQ: http://www.startech.com/faq/mst_hubs_passive_vs_active_adapters.

Surface Dock

If you experience issues when you connect passive video signal adapters to the Surface Dock, Microsoft recommends that you use active video signal converters instead. StarTech.com offers an active video signal converter for DVI monitors (MDP2DVIS) and for HDMI monitors (MDP2HD4KS).

Note: This issue does not apply to the Surface Pro 3 Docking Station.

Compliance and safety

Compliance letters

  • WEEE
    • Språk: English
  • RoHS
    • Språk: English

Safety Measures

  • If product has an exposed circuit board, do not touch the product under power.
  • If Class 1 Laser Product. Laser radiation is present when the system is open.
  • Wiring terminations should not be made with the product and/or electric lines under power.
  • Product installation and/or mounting should be completed by a certified professional as per the local safety and building code guidelines.
  • Cables (including power and charging cables) should be placed and routed to avoid creating electric, tripping or safety hazards.
* Produkters utseende och specifikationer kan komma att ändras utan förvarning.
Tillbaka till toppen