Produktsökning

A/V-reseadapter: 3-i-1 Mini DisplayPort till VGA-, DVI- eller HDMI-konverterare

Anslut en Mini DisplayPort-utrustad PC eller Mac® till en HDMI-, VGA- eller DVI-skärm

Produkt ID: MDP2VGDVHD

  • Tre-i-en-adapter – mDP till VGA, mDP till HDMI och mDP till DVI
  • Med stöd för videoupplösning på upp till 1920x1200/1080p
  • Plug-and-play-installation
Ditt pris
€48,99 EUR excl. VAT
€61,24 EUR incl. VAT

Med denna reseadapter kan du ansluta din mDP-kapabla Ultrabook™ eller bärbara dator till en VGA- eller HDMI®-skärm. 

3-i-1 Mini DisplayPort-adaptern har testats ordentligt för att garantera kompatibilitet och är det perfekta tillbehöret för alla dina Microsoft® Surface™ Pro-enheter som är utrustade med mDP.

Surface-kompatibel

Anslut till en HDMI- eller VGA-skärm

Varför ta med sig flera adaptrar när man bara behöver en? Istället för att ha tre olika adaptrar till hands har mDP reseadapter VGA-, DVI- och HDMI-utgångar så att du kan ansluta från din bärbara dators mDP-utgång till en modern skärm i styrelserummet eller klassrummet - en idealisk plug-and-play-lösning för BYOD-situationer (Bring Your Own Device) på kontoret. 

Eftersom konverteraren stöder videoupplösningar på upp till 1920x1200 eller 1080p kan du dessutom konvertera en Mini DisplayPort-videokälla till HDMI, VGA eller DVI utan att offra videokvalitet.

Garantera kompatibilitet med nästan alla skärmar, TV-apparater eller projektorer

Maximera bärbarheten

A/V-reseadaptern maximerar bärbarheten med sin lilla storlek och lätta design. Den behändiga designen gör adaptern lika portabel som din bärbara dator då den passar i din datorväska och gör att du inte behöver ha med dig mer än en adapter. Med denna adapter kan du bokstavligen komma in i vilket styrelserum som helst redo att ge en presentation, ge ett bra första intryck och behöver inte skämmas medan du rotar omkring i väskan för att hitta rätt kontakt.

Maximera bärbarheten

3-i-1 konverteraren är kompatibel med Intel Thunderbolt-porten på din dator och är enkel att installera utan behov av programvara eller drivrutiner.

MDP2VGDVHD täcks av StarTech.coms 3-årsgaranti och gratis livstidsgaranti på teknisk support.

 

Användning

  • Ta med dig adaptern när du är ute och reser och du kan koppla in dig mot i stort sett alla skärmar som du hittar
  • Anslut din BYOD-bärbar dator/Ultrabook till en befintlig HDMI-, DVI- eller VGA-skärm på jobbet
  • Anslut en DVI-, VGA- eller HDMI-skärm till din bärbara dator med Mini DisplayPort och använd den som en andra skärm

Fördelarna med StarTech.com

  • Maximera bärbarheten vid resor eller på kontoret med minimal storlek och lätt design
  • Säkerställer kompatibilitet med i stort sett alla skärmar med tre-i-en-adapter som konverterar Mini DisplayPort till VGA, HDMI eller DVI

Partnernummer

  • Ingram Micro Sweden V932989
  • ALSO Sweden 000000000002763734
  • UPC 065030854290

Specifikationer

Warranty Information Warranty 3 Years
Förpackning Package Height 18.0 mm [0.7 in]
Package Length 22.0 cm [8.7 in]
Fraktvikt (förpackning) 66.0 g [2.3 oz]
Package Width 20.0 cm [7.9 in]
Hårdvara Active or Passive Adapter Aktiv
AV-ingång Mini DisplayPort - 1.2
AV-utgång VGA
DVI-D - Single-Link
HDMI - 1.4
Audio Ja
Kontakt(er) 1 - Connector B HDMI (19-stifts)
VGA (15-stifts, High Density D-Sub)
DVI-D (25-stifts)
1 - Connector A Mini-DisplayPort (20-stifts)
Miljö Drifttemperatur 0°C to 45°C (32°F to 113°F)
Förvaringstemperatur -10°C to 80°C (14°F to 176°F)
Luftfuktighet 10~85 % RH
Prestanda Audio-specifikationer DVI - No Audio Support
HDMI - 7.1 Channel Audio
VGA - No Audio Support
Maximum Cable Distance To Display 15.2 m [49.9 ft]
Maximal analog upplösning 1920x1200/1080p
Maximal digital upplösning 1920x1200/1080p
Stöd för widescreen Ja
Särskilda anmärkningar/krav Obs. Endast en videoutgång stöds av videoadaptern i taget. Om flera anslutningar görs, kommer endast en av utenheterna att fungera
HDMI-porten är en passiv port.
DVI-D-porten är en passiv port.
VGA-porten är en aktiv port.
Maximum Cable Distance to Display refers to digital video. VGA distance capabilities are dependent upon the quality of your cabling
Utseende Produktvikt 57.0 g [2.0 oz]
Färg Svart
Kabellängd 15 cm [5.9 in]
Produktlängd 27.0 cm [10.6 in]
Produktbredd 45.0 mm [1.8 in]
Produkthöjd 15.0 mm [0.6 in]
Vad det är i lådan 1 - Ingår i paketet Mini DisplayPort till HDMI-/VGA-/DVI-adapter
Installationsguide

Tillbehör

MXT101MMHQ10

10 ft Coax High Resolution VGA Monitor Cable HD15 M/M

Connect your VGA monitor with the highest quality connection available

Ditt pris
€14,99 EUR excl. VAT
€18,74 EUR incl. VAT
MXT105MMHQ

4,5 m koaxialkabel för VGA-skärm med hög upplösning, HD15 M/M

Anslut din VGA-skärm med anslutning av högsta tillgängliga kvalitet.

Ditt pris
€19,99 EUR excl. VAT
€24,99 EUR incl. VAT

Drivers/Downloads

Prata med en rådgivare.

Vi är alltid redo att hjälpa dig med alla dina frågor.

Direktchatt (opens in new window)

Manual(er):

Datasheet

Produktsupport

Prata med en rådgivare.

Vi är alltid redo att hjälpa dig med alla dina frågor.

Direktchatt (opens in new window)

Vanliga frågor

Installation

This device is plug and play. It does not use any drivers, and does not require any setup tasks other than plugging in the source (for example, a computer) and the destination (for example, a monitor).

Problemsökning

When you troubleshoot issues with a video adapter, there are some quick tests that you can complete to rule out potential problems. You can test to make sure that the following components are working correctly and are not the source of the issue:

  • Video cables

  • Video adapter

  • Video source (such as a DVD player or computer)

  • Video destination (such as a monitor or projector)

To test your setup components, try the following:

  • Use the cable, video adapter, video source, and video destination in another setup to see if the problem is with the components or the setup.

  • Use a different cable, video adapter, video source, and video destination in your setup to see if the problem persists. Ideally, you should test a component that you know works in another setup.

When you test your cables, it is recommended that you do the following:

  • Test each cable individually.

  • Use short cables when you are testing.

When you test the video source and video destination, it is recommended that you do the following:

  • Remove the video adapter from your setup and test to make sure that the video source and video destination work together without the video adapter.

  • Test to make sure that the video source and video destination work together at the resolution that you want to use.

Note: In order for your setup to work properly, the video source, adapter, and destination all need to support the resolution that you are using.

Try the following:

  1. Check that the monitor’s video port works with another source.
  2. Check that the cables between the source and the destination work with other equipment.
  3. Check whether the video adapter works with another source and another destination.

The error “Out of Range” normally means that the resolution being output by the computer is not compatible with the display. Try lowering the resolution to see if that helps resolve the issue.  You may need to connect another monitor or restart the computer or source to accomplish this.

This is likely a High-bandwidth Digital Content Protection (HDCP) issue. If you are converting a video signal from a device that can play copyright-protected content, HDCP will block the conversion to an analog signal (for example, VGA) or to any video capture cards.

You will likely run into this issue when you use devices like Blu-ray players, DVD players, and certain gaming consoles. For more information on HDCP and gaming consoles, refer to the following FAQ: https://www.startech.com/faq/video_capture_cards_video_game_console_compatibility.

Some video cards also output an HDCP signal full time. In this case there should be an option for your video card to disable this feature. You might need to contact the manufacturer of your video card for more information.

Adhering to HDCP is required for converting all digital signals to analog signals or to video capture cards. Unfortunately, there is nothing you can do in these situations other than convert to a digital display.

If a DisplayPort converter with audio is not passing sound from the source to the destination, complete the following:

  1. Make sure that the DisplayPort connection on the video card is the default audio playback device.
  2. Make sure that the video card has the DisplayPort audio codec installed. If not, visit the video card manufacturer's website to find out how to update the video card driver.

Before You Buy

Unfortunately no, this device has an intended source and an intended destination.  Refer to the title of the webpage for this order.

Digital Visual Interface (DVI) is a video display interface that can contain different types of signaling, based on the application. DVI cables and ports are created using different connector types to identify what application they are intended to be used in. The connector types are identified by the number of pins on the DVI connector. DVI comes in the following five different connector types: 

Single and Dual link DVI indicate the maximum resolution capabilities of the video source or video destination. The maximum resolutions are Single Link (1920 x 1080 @ 60Hz) and Dual Link (2560 x 1600 @ 60Hz).

Note: The maximum resolution of your video source and video destination are ultimately determined by the technical specifications of the devices. The connector type is not a definitive indicator of the maximum resolution.

DVI-A carries only analog (for example, VGA) with no digital component. DVI-D carries only digital video (for example, HDMI) with no analog component. DVI-I combines DVI-A and DVI-D connections to include both analog and digital components. A DVI-I port may be on either your video source or display, but whether or not a display carries either or both analog and digital sources depends on the technical specifications of your device.

When you convert video from a source that uses DisplayPort or Mini DisplayPort to DVI or HDMI (for example, a computer to a monitor), you will need to consider the difference between passive and active adapters.

If the source supports dual-mode DisplayPort (also known as DP++), then you can use a passive adapter because the source can perform the conversion. If the source does not support DP++, then you need to use an active converter, which includes additional chips to perform the conversion.

Thunderbolt ports support DP++ natively. To run multiple monitors from the same computer, refer to the Active Adapters section below.

Passive Adapters

Passive adapters are less expensive since they do not need to include additional chips. A quick way to check whether you can use a passive adapter is to see if the DisplayPort or Mini DisplayPort source has the DP++ symbol above it. The symbol is a D with a P inside of it, with two + signs to the left, one on top of the other.

Active Adapters

Active adapters use additional chips to make the conversion inside the adapter, regardless of whether the source supports DP++. This means that active adapters are more expensive than passive adapters.

If you want to use multiple monitors with the same computer, you should use an active adapter because some video cards cannot run the maximum number of monitors while using DP++. This is especially true if the computer has more than one DisplayPort or Mini DisplayPort connection. Check with your video card manufacturer to confirm which type of adapter you need for the setup that you would like to run.

Note: You should use passive adapters with StarTech.com MST hubs, except when you are converting from DisplayPort to VGA, since that type of conversion requires active adapters.  For more information on using adapters with StarTech.com MST hubs, refer to the following FAQ: http://www.startech.com/faq/mst_hubs_passive_vs_active_adapters.

Surface Dock

If you experience issues when you connect passive video signal adapters to the Surface Dock, Microsoft recommends that you use active video signal converters instead. StarTech.com offers an active video signal converter for DVI monitors (MDP2DVIS) and for HDMI monitors (MDP2HD4KS).

Note: This issue does not apply to the Surface Pro 3 Docking Station.

Compliance and safety

Compliance letters

Safety Measures

  • If product has an exposed circuit board, do not touch the product under power.
  • If Class 1 Laser Product. Laser radiation is present when the system is open.
  • Wiring terminations should not be made with the product and/or electric lines under power.
  • Product installation and/or mounting should be completed by a certified professional as per the local safety and building code guidelines.
  • Cables (including power and charging cables) should be placed and routed to avoid creating electric, tripping or safety hazards.
* Produkters utseende och specifikationer kan komma att ändras utan förvarning.
Vänta...
Tillbaka till toppen