Utgått

PCIe-inspelningskort för HD – HDMI VGA DVI & komponent – 1080P vid 60 FPS

Spela in en 1080p HDMI, DVI, VGA eller komponent audio-videokälla vid 60 FPS genom en PCI Express-port i lågprofil eller helprofil

Produkt ID: PEXHDCAP60L

  • Sömlös bildkvalitet med videoinspelning i 1080p vid 60 fps
  • Stöd för HDMI-, DVI-, VGA- och komponent-källor så att du kan spela in från i stort sett vilken enhet som helst
  • H.264-kodning garanterar bred enhetskompatibilitet med exporterade videofiler

Detta allt-i-ett PCI Express-inspelningskort låter dig spela in video och stereoaudio i 1080p HD till ditt datorsystem. Med flera videoingångar, som till exempel HDMI, DVI, VGA och komponent, kan inspelningskortet spela in originalinnehåll från flera olika källor som till exempel datorer, videokameror, säkerhetssystem, POS-terminaler och servrar. Tack vare bildrutehastigheten på 60 FPS (frames per second) och H.264-kodningen är detta den perfekta lösningen för inspelning av video i HD för redigering, kompilering och arkivering.

Kortet kan installeras i vilken PCI-port i lågprofil eller helprofil som helst och är därför en idealisk lösning för fasta arbetsstationer som till exempel 2U eller 4U hyllmonterade servrar eller mediacenter. Installation av inspelningsenheten internt via PCIe garanterar en säker och pålitlig lösning för videoinspelning.

Sömlös bildkvalitet vid 60 fps

Detta inspelningskort låter dig spela in förlustfri video vid 60 FPS och garanterar att allt innehåll sparas, till skillnad från inspelningsenheter med 30 FPS som endast får med hälften av all action. 60 FPS matchar exakt utdatan från de flesta videokorten till datorer vilket är bra för inspelning av utdata från din PC, server eller POS-station när du skapar mjukvarutränings- och informationsvideor.

H.264-kodning för bred enhetskompatibilitet 

Den medföljande mjukvaran är kodad i H.264, världens vanligaste video-codec, för att garantera att dina videoinspelningar är kompatibla med nästan alla plattformar som till exempel PC, Mac®, iOS® och Android™ utan att redigering eller konvertering behövs. H.264 stöds även av de flesta programmen, som till exempel Adobe Premiere® och Windows Media® Encoder. Dessutom låter inte mjukvaran dig bara spela in och exportera videor utan låter dig även ta skärmdumpar, schemalägga inspelningar och omedelbart strömma din videokälla över Internet med hjälp av onlinetjänster som till exempel Twitch.

Detta kort kan spela in förlustfri rå video och är därför kompatibelt med Microsoft® DirectShow. Med rå videoinspelning kan du spela in video med hjälp av ditt val av tredje parts DirectShow-program som till exempel Open Broadcaster Software (OBS). 

Flexibla indata-lösningar för bekväm kompatibilitet

Med flera A/V indata-alternativ kan du spela in från många olika källor inklusive HDMI, DVI, VGA och komponent. Du kan dessutom använda inspelningskortet med A/V-adaptrar för att spela in andra videokällor som till exempel SDI med hjälp av vår SDI till HDMI-konverterare (SDI2HD). Stöd för olika A/V-enheter är idealiskt för arkivering av analog video i en digital databas.

Enheten har även lättanvänt program som är kompatibelt med NTSC- och PAL-system och är därför ett måste för professionella tillämpningar inom videoarkivering där källmedia kan variera från projekt till projekt.

PEXHDCAP60L täcks av StarTech.coms 2-årsgaranti och gratis livstidsgaranti på teknisk support.

Obs.:

  • Spelar inte in digitalt krypterat innehåll.

Systemkrav:

  • Operativsystem: Microsoft® Windows® Vista/7/8/8.1 (32/64-bit)
  • CPU: i3 Dual Core 2,8 GHz eller bättre
  • Minne: 2 GB
  • Tillgänglig PCI Express-port

Användning

  • Spela in video för tränings- eller informationssyften från olika videotekniker
  • Strömma live video online med strömningstjänster som t.ex. Twitch.tv
  • Spela in gameplay från TV-spel i HD vid 60 fps och spela samtidigt på en annan skärm med hjälp av HDMI-splittern ST122HDMILE
  • Konvertera analog video till digital för professionell videoarkivering

Fördelarna med StarTech.com

  • Spela in varje bildruta av videon från datorn med stöd för 1080p vid 60 FPS
  • H.264-kodning garanterar att dina inspelningar fungerar på alla plattformar som till exempel PC, Mac, iOS & Android
  • Spela in från olika källenheter med många olika videoingångar inklusive HDMI, DVI, VGA och komponent

Partnernummer

  • UPC 065030858373

Kompatibilitet

  • Windows 7 logo
  • Windows 8 logo
  • Windows 10 logo
Windows® 10 (32/64), 8 / 8.1 (32/64) / Windows 7 (32/64) / Vista (32/64) / XP (32/64)

Specifikationer

Warranty Information Warranty 2 Years
Förpackning Package Length 20,6 cm [8,1 in]
Package Width 14,5 cm [5,7 in]
Package Height 40 mm [1,6 in]
Fraktvikt (förpackning) 315 g [11,1 oz]
Hårdvara AV-ingång HDMI
DVI
Komponent YCbCr
Audio Ja
AV-ingång VGA
Industristandarder NTSC, PAL-M, PAL-60, PAL
Videokodning: MPEG4/H.264
Video Encoding: MPEG4/H.264
DirectShow Compatible
Chipset-ID Mstar - MST3367CMK-IF-170
Kontakt(er) 1 - Connector A PCI Express x1
1 - Connector B DVI-I (29-stifts)
HDMI (19-stifts)
Komponentvideo (3 x RCA)
VGA (15-stifts, High Density D-Sub)
S-Video (4-stifts, Mini-DIN)
Miljö Drifttemperatur 0°C to 40°C (32°F to 104°F)
Förvaringstemperatur -5°C to 40°C (23°F to 104°F)
Luftfuktighet 20~80 % RH (icke-kondenserande)
Mjukvara OS-kompatibilitet Windows® 10 (32/64), 8 / 8.1 (32/64) / Windows 7 (32/64) / Vista (32/64) / XP (32/64)
Prestanda Maximal analog upplösning 1920x1080 (1080p/30/50/60)
Maximal digital upplösning Video input: 1920x1080 (1080p/30/50/60)
Video output: 1920x1080 (1080p/60)
Stödda upplösningar 1080i/p, 720p, 576i/p, 480i/p
Stöd för widescreen Ja
Audio-specifikationer HDMI eller komponent RCA stereo
Medeltid mellan fel (MTBF) 1,780,641 Hours
Utseende Produktlängd 14,1 cm [5,6 in]
Produktbredd 12 cm [4,7 in]
Produkthöjd 18 mm [0,7 in]
Produktvikt 71 g [2,5 oz]
Vad det är i lådan 1 - Ingår i paketet Inspelningskort för PCI Express
Adapter för anslutning mellan HDMI och DVI
VGA till DVI-adapter
Komponent breakout-kabel
S-Video breakout-kabel
Fäste i helprofil (monterat)
Fäste i lågprofil
Installationsskiva med mjukvara
Instruktionsbok

Tillbehör

Utgått
HDMIMM10

10 ft High Speed HDMI Cable - HDMI- M/M

Provides a high speed connection between HDMI®-enabled devices

Ditt pris
€16,99 EUR excl. VAT
€21,24 EUR incl. VAT
Utgått
HDMIMM6

6 ft High Speed HDMI Cable – Ultra HD 4k x 2k HDMI Cable – HDMI to HDMI M/M

Create Ultra HD connections between your High Speed HDMI®-equipped devices

Ditt pris
€10,99 EUR excl. VAT
€13,74 EUR incl. VAT
MXT101MMHQ10

10 ft Coax High Resolution VGA Monitor Cable HD15 M/M

Connect your VGA monitor with the highest quality connection available

Ditt pris
€12,99 EUR excl. VAT
€16,24 EUR incl. VAT
MXT101MMHQ

1,8 m koaxialvideokabel för VGA-skärm med hög upplösning - HD15 till HD15 M/M

Anslut din VGA-skärm med anslutning av högsta tillgängliga kvalitet.

Ditt pris
€8,99 EUR excl. VAT
€11,24 EUR incl. VAT
Utgått
DVIISMM15

15 ft DVI-I Single Link Digital Analog Monitor Cable M/M

Provides a high speed, crystal clear connection between your DVI devices

Ditt pris
€24,99 EUR excl. VAT
€31,24 EUR incl. VAT
MXT105MMHQ

4,5 m koaxialkabel för VGA-skärm med hög upplösning, HD15 M/M

Anslut din VGA-skärm med anslutning av högsta tillgängliga kvalitet.

Ditt pris
€16,99 EUR excl. VAT
€21,24 EUR incl. VAT
DVIMM6

1,8 m DVI-D Single Link LCD platt bildskärmskabel - M/M

Ger en kristallklar anslutning med hög hastighet mellan dina digitala DVI-enheter

Ditt pris
€9,99 EUR excl. VAT
€12,49 EUR incl. VAT
DVIDSMM10

10 ft DVI-D Single Link Cable - M/M

Provide a high-speed, crystal-clear connection to your DVI digital devices

Ditt pris
€12,99 EUR excl. VAT
€16,24 EUR incl. VAT
DVIDSMM15

15 ft DVI-D Single Link Cable - M/M

Provide a high speed, crystal clear connection between your DVI digital devices

Ditt pris
€19,99 EUR excl. VAT
€24,99 EUR incl. VAT
MU6MMRCA

1,8 m stereoaudiokabel - 3,5 mm hane till 2x RCA hane

Koppla din dator eller ljudspelare till en RCA-ljudenhet

Ditt pris
€3,99 EUR excl. VAT
€4,99 EUR incl. VAT

Drivers/Downloads

Prata med en rådgivare.

Vi är alltid redo att hjälpa dig med alla dina frågor.

Direktchatt (opens in new window)

Drivrutin(er):

Manual(er):

Mjukvara

Datasheet

Produktsupport

Prata med en rådgivare.

Vi är alltid redo att hjälpa dig med alla dina frågor.

Direktchatt (opens in new window)

Vanliga frågor

Problemsökning

When you troubleshoot issues with a video capture device, there are some quick tests that you can complete to rule out potential problems. You can test to make sure that the following components are working correctly and are not the source of the issue:

  • Video cables

  • Video source

  • Video capture device

To test your setup components, try the following:

  • Use the video cables, source, and capture device in another setup to see if the problem is with the components or the setup.

  • Use a different video cable, source, and capture device in your setup to see if the problem persists. Ideally, you should test a component that you know works in another setup.

When you test your cables, it is recommended that you do the following:

  • Test each cable individually.

  • Use short cables when you are testing.

When you test the video cables and source with the video capture device, make sure that the following is true:

  • Other video destinations work with the same video source. For more information, visit http://www.startech.com/faq/video_capture_cards_source_compatibility.

  • Adapters and extenders are kept to a minimum.

  • The video source is not copyright protected (for example, HDCP).

  • The video standard (for example, NTSC, PAL, HDMI, and so on) of the video source matches the Technical Specifications of the video capture device.

To check if the video capture device is detected in Windows®, complete the following:

  1. Press the Windows key + R, type devmgmt.msc, and press Enter to open Device Manager. Check to see if your device is listed under Sound, video and game controllers.

  2. Do one of the following:

When you test the video capture device on your computer, make sure that the driver and capture software is installed on your system for your adapter. Some cards may be able to support third party software, however, support is limited. For more information, visit https://www.startech.com/faq/video-capture-cards-third-party-software.

Note: The USB3HDCAP requires a compatible USB 3.0 card.

Before you begin to troubleshoot StreamCatcher, make sure that you have tried to troubleshoot the video capture device by referring to the following FAQ: www.startech.com/faq/video_capture_cards_general_troubleshooting.

If you are unable to display or record video, complete the following in Device Settings:

  • Make sure that the input that you are trying to record or display is selected in Video Source.

  • Make sure that the video standard is set correctly for your region (for example, NTSC for North America, PAL for Europe, and so on).

  • If your audio is not working, make sure that you selected the correct audio source in Audio Source.

If the recorded video is poor quality, navigate to Record Settings and change the following settings to best suit your setup:

  • Record Resolution

    • High
    • Low
  • Record Mode

    • VBR (Variable Bit Rate) adjusts the bit rate based on the complexity of the video and saves space.
    • CBR (Constant Bit Rate) maintains the same bit rate regardless of complexity and offers the best recording quality.
  • Record Quality

    • The VBR quality level increases from 1 to 10, with 10 being the highest quality level.
    • The CBR quality level goes from 2 Mbps to 16 Mbps, with 16 Mbps being the highest quality level. 

If you are experiencing any issues with streaming, make sure that the following is true:

  • The target IP address is correct.

  • The correct protocol is selected.

  • You tested a low resolution and low bit rate to get the best performance.

Hur man

To confirm that Windows detects your expansion card, complete the following:

  1. Press the Windows key+R, type devmgmt.msc, and press Enter.
  2. In Device Manager, under the appropriate heading, confirm that your expansion card is listed and that there isn't an exclamation mark next to it.  For example, a USB controller card would be under Universal Serial Bus controllers.

Your expansion card is listed according to the name of the chipset. To determine the name of the chipset of your expansion card, navigate to www.StarTech.com and look on the Technical Specifications tab for your product.

  1. Open a web browser and navigate to https://www.youtube.com/live_dashboard.
  2. Under Encoder setup, copy the Server URL from the bottom of the page.
  3. Add a slash mark and your stream name or key to the end of the URL (for example, rtmp://a.rtmp.youtube.com/live2/USERACCOUNT-8033.d1fj-m8d7-ds8y-41qj).
  4. Copy the RMTP link (you will need it to complete step 8).
  5. Open Stream Catcher.
  6. Click Settings Streaming Settings.
  7. In the Streaming Protocol Type drop-down menu, click RTMP.
  8. In the Streaming Public URL field, paste the link that you copied in step 4.
  9. On the Stream Catcher home page, click the blue record icon.

Before You Buy

You can use a video capture device to capture or record an audio and video output signal to a connected computer.  You can use USB, ExpressCard, or PCI Express technology to connect a video capture device to a computer system.  StarTech.com has video capture devices that can capture audio and video from sources such as HDMI, DVI, VGA, S-Video, component, or composite.  The captured signals are usually recorded with software that is included with the video capture device.  Some software will also stream the captured signals online.

Select a capture device that features the audio and video connections you want to use.  These can be identified on the product page, under the Technical Specifications tab.  Whenever possible, you should avoid using adapters or converters with video capture devices as they can cause issues or negatively impact the quality of the audio or video signals being captured.

When looking at a video capture device that requires software to use, it is important to consider the operating system you want to use it on.  You can find this on the product page under the Technical Specifications tab, which only lists supported operating systems.

Consider what resolution and refresh rate you require.  You can find the supported resolutions and refresh rates on the product page, under the Technical Specifications tab in the Performance section. 

Video capture device usually use drivers and software to record audio and video.  Both the drivers and the software can be found on the product page under the Support tab.  Different software will have different features so it’s a good idea to review the software to make sure it is a good fit for your intended usage.  You can do so by looking at the manual for the device, also located on the Support tab.  StarTech.com only supports the software included with the video capture device. 

HDCP stands for High-Bandwidth Digital Content Protection.  This system protects high definition video from being intercepted, modified, or recorded between the source and the display.  All StarTech.com devices adhere to the HDCP standard, so they do not record HDCP-protected content.  HDCP content that is being blocked often appears as a blank screen or a screen with an HDCP error shown on it.

Certain video capture devices allow you to stream video feeds online with streaming platform such as YouTube.  For more information, review the product manual or watch our video on this subject.  You can find a link to the video in the description.  If at this point you have further questions about a Startech.com video capture device contact our technical support team for further assistance. 

Although you may be able to plug in all of the connectors used for video standards associated with video capture cards/cables, you may still encounter issues that may prevent the video from being captured correctly.

About copyright protection

Some video sources implement copyright protection when you are plugging into a non-display device. Examples of copyright protection include the following:

  • High Definition Content Protection (HDCP). This type of copyright protection is included with DVI and HDMI® and can appear as a video error or blank screen. HDCP may also appear on the screen.

  • Analogue Content Protection (ACP). This type of copyright protection is included with analogue video (for example, composite, s-video, or component). ACP can appear as a brightness pulsing up and down.

Copyright protection cannot legally be bypassed, and StarTech.com does not offer any products that do so.

Using video adapters

It is possible to passively convert video signals to different connector types, but the video standards will not always match between the video source and video destination. You may need to actively convert from one video type to another to ensure that the correct conversion is being made. When a passive converter is not available, most video standards can be converted with active converters.

Examples of incompatible passive conversions include the following:

  • VGA source to composite or component (RCA) video, or composite or component (RCA) video to VGA.
  • Composite (RCA) source to s-video.
  • VGA to DVI-D and DVI-D to VGA.

Note: S-video to composite can be passively converted. DVI-I/DVI-A and VGA can be used bidirectionally.

About output resolution

If your video source has the ability to change resolutions (for example, a computer), it may be possible to send an incompatible resolution. To verify that the correct resolution is being used, navigate to www.StarTech.com and click the Technical Specifications tab for your product. Make note of the Industry Standards and Maximum Resolution specifications.

In the operating system's display management, you can adjust your video source to match or go below the maximum resolution and if possible, the refresh rate of your capture card.

Due to High-bandwidth Digital Content Protection (HDCP), it is not possible to record from certain gaming consoles. HDCP content (for example, movies) are protected, but the console itself may or may not have permanent HDCP enabled on the HDMI output.

For more information about consoles and their permanent HDCP enforcement, consult the following table:

Console Permanent HDCP

PlayStation 3

Yes
PlayStation 4

Optional. You can change the settings in the menu.

Wii U

No

XBox 360

No
XBox One No

You can use a video capture card with consoles that do not have permanent HDCP enabled.

Certain StarTech.com video capture cards are compatible with DirectShow and will work with many third-party video capture applications that are compatible with DirectShow. For more information on DirectShow compatible video capture cards, refer to the following FAQ: https://www.startech.com/faq/video-capture-cards-directshow.

Although third-party software might work with this video capture card, StarTech.com does not officially support or endorse the use of third-party applications.

This video capture card uses a DirectShow compatible driver and can be used with many third-party video capture applications. The driver for your video capture card still needs to be installed. You can find the driver by entering the product ID at http://www.startech.com/Support.

StarTech.com does not officially support or endorse the use of third-party applications. Any use of applications not provided by StarTech.com with our hardware must be independently supported.

Yes, if you use this capture card with third party software, it is possible to turn your video camcorder into a webcam.

Although third-party software might work with this video capture card, StarTech.com does not officially support or endorse the use of third-party applications.

This video capture card does not support hardware video encoding.

You can use the software provided to compress the video with the H.264 codec, but the compression happens while the video is being captured. 

You may also be able to use a third-party application to capture uncompressed video. Although third-party software might work with this video capture card, StarTech.com does not officially support the use of third-party applications.

This video capture card cannot record from more than one input at the same time.  

Note: Although the USB2HDCAPS can be connected to multiple computers on the same network, only one device can capture video at a time.

 

Compliance and safety

Compliance letters

  • WEEE
    • Språk: English
  • RoHS
    • Språk: English

Safety Measures

  • If product has an exposed circuit board, do not touch the product under power.
  • If Class 1 Laser Product. Laser radiation is present when the system is open.
  • Wiring terminations should not be made with the product and/or electric lines under power.
  • Product installation and/or mounting should be completed by a certified professional as per the local safety and building code guidelines.
  • Cables (including power and charging cables) should be placed and routed to avoid creating electric, tripping or safety hazards.
* Produkters utseende och specifikationer kan komma att ändras utan förvarning.
Tillbaka till toppen