S-Video/komposit till USB-videoinspelningskabel med stöd för TWAIN och Mac

Spela in och konvertera S-video eller kompositvideo till din PC eller Mac® som digital media

Produkt ID: SVID2USB23

  • Fungerar med Mac®- och Windows®-datorer
  • Välj mellan MPEG-1-, MPEG-2-, och MPEG-4-kodning
  • Stöd för TWAIN för användning med olika program
Ditt pris
€52,99 EUR excl. VAT
€66,24 EUR incl. VAT

SVID2USB23-videoinspelningskabeln för anslutning mellan USB 2.0 och S-video/komposit är en lättanvänd inspelningslösning för analog video som låter dig föra över video från en S-video- eller kompositvideo-källa, samt tillhörande tvåkanalers RCA-audio, till en Mac® eller dator med Windows®.

Kabeln ansluter till USB 2.0-kontakt på bärbar eller stationär dator och är inte större än att den får plats i din hand; en praktisk och bärbar videoupptagningslösning som passar lika bra med bärbara som stationära datorer.

SVID2USB23 är en lättanvänd enhet som kan spela in analog video till datorn från externa källor som t.ex. VCR eller videokamera och är den perfekta lösningen för Betamax- eller VHS-videoinspelning med MPEG-1-, MPEG-2- och MPEG-4-kodning i realtid samt stöd för TWAIN för att garantera kompabilitet med ett brett sortiment av system och program.

Denna inspelningskabel för analog video stöder ett brett sortiment av operativsystem och ger sömlös analog videoinspelning för Mac®-datorer (OS 10.x) och Windows®-datorer (Windows® 7/8/8.1/10, Windows® 2000/XP(32/64-bit)/Vista(32/64-bit)).

Täcks av StarTech.coms 2-årsgaranti och gratis livstidsgaranti på teknisk support.

Användning

  • Konvertera hemmavideor från VHS till digitalt format - Anslut din VCR, videokamera eller en annan analog videokälla till din Mac eller PC och spela in din audio/video i MPEG 1/2/4-format
  • Importera inspelade videor till din Mac® eller dator med Windows® för redigering och gör dina egna kompileringar

Fördelarna med StarTech.com

  • Stöder både Mac® och Windows® för att garantera behändig kompabilitet mellan plattformar
  • Den medföljande mjukvaran stöder videoinspelningsformaten NTSC, PAL och SECAM samt alternativ för multipla filformat och ger maximal flexibilitet för ännu bekvämare videoinspelning
  • TWAIN-stöd tillåter många olika programalternativ för videoinspelning och -redigering
  • Den har en liten USB-driven design med låg vikt som gör den till en slimmad och bärbar videoinspelningslösning

Partnernummer

  • ALSO Sweden 000000000002764094
  • UPC 065030842099

Kompatibilitet

  • Windows 10 logo
  • Windows 8 logo
  • Windows 7 logo
  • Mac OS X El Capitan (10.11) logo
  • macOS High Sierra (10.13) logo
  • macOS Sierra (10.12) logo
  • macOS Mojave (10.14) logo
Windows® 2000, XP, Vista, 7, 8, 8.1, 10
Apple® OSX 10.6 - 10.14

Specifikationer

Warranty Information Warranty 2 Years
Förpackning Package Height 41 mm [1,6 in]
Package Length 14,6 cm [5,7 in]
Fraktvikt (förpackning) 0,2 kg [0,4 lb]
Package Width 20,8 cm [8,2 in]
Hårdvara AV-ingång Audio RCA
Composite
S-Video
AV-utgång USB
Audio Ja
Industristandarder NTSC, PAL, SECAM
Videokodning: MPEG 1, MPEG 2, och MPEG 4
DirectShow Compatible
Chipset-ID eMPIA - EM2861
Kontakt(er) Connector A 1 - USB Type-A (4-stifts) USB 2.0
Connector B 1 - S-Video (4-stifts, Mini-DIN)
1 - Kompositvideo (1 x RCA)
1 - Stereoaudio (2 x RCA)
Miljö Drifttemperatur 0°C to 50°C (32°F to 122°F)
Förvaringstemperatur -20°C to 60°C (-4°F to 140°F)
Luftfuktighet 5~85 % RH icke-kondenserande
Mjukvara OS-kompatibilitet Windows® 2000, XP, Vista, 7, 8, 8.1, 10
Apple® OSX 10.6 - 10.14
Prestanda Maximal dataöverföringshastighet 480 Mbps
Maximal analog upplösning 720x480(NTSC) / 720x576(PAL)
Särskilda anmärkningar/krav Obs. MPEG 4-videofilformatet stöds i det medföljande SVID2USB23 inspelningsprogrammet för Mac och andra DirectShow™-inspelningsprogram från tredje part som till exempel OBS
movavi®-videoprogram stöder inte MPEG4-videofilformatet
Utseende Produktvikt 66 g [2,3 oz]
Färg Svart
Kabinettyp Av plast
Kabellängd 527 mm [20,7 in]
Produktlängd 8 cm [3,1 in]
Produktbredd 34 mm [1,3 in]
Produkthöjd 1,4 cm [0,6 in]
Vad det är i lådan Ingår i paketet 1 - USB Videoinspelningskabel
1 - Programskiva
1 - Drivrutin CD
1 - Instruktionsbok

Drivers/Downloads

Prata med en rådgivare.

Vi är alltid redo att hjälpa dig med alla dina frågor.

Direktchatt (opens in new window)

Drivrutin(er):

Manual(er):

Datasheet

Produktsupport

Prata med en rådgivare.

Vi är alltid redo att hjälpa dig med alla dina frågor.

Direktchatt (opens in new window)

Vanliga frågor

Problemsökning

In some cases, both the video and audio devices show up in Device Manager as an audio device. To resolve this issue, complete the following:

  1. Press the Windows key + R, type devmgmt.msc, and press Enter to open the Device Manager.
  2. Right-click the device and click Uninstall.
  3. Select the Delete the driver software for this device checkbox, if available.
  4. Click OK.
  5. Repeat steps 1 to 3 for the second device.
  6. After both devices are uninstalled, click the Action menu and click Scan for hardware changes.

To download the latest drivers for your product, complete the following:

  1. Navigate to the StarTech.com website (http://www.startech.com/Downloads) and download the latest drivers for your product. You can find the part number and product ID on the product’s packaging.
    Note: Windows usually saves the files to the Downloads folder that is associated with your user account on the drive where Windows is installed (for example, C:\Users\your_name\Downloads).

  2. After the download is complete, right-click the zip folder that you downloaded, click Extract All, and complete the instructions.

  3. Press the Windows key + R, type devmgmt.msc, and press Enter to open the Device Manager.

To install the audio drivers, complete the following:

  1. Right-click the device, which will have a “!” next to it to indicate a driver issue, and click Update Driver.
    Note: If the driver is being recognized properly but there is still a driver error, the driver will be listed as USB EMP Audio Device.

  2. Click Browse my computer for driver software.

  3. Select the Let me pick from a list of device drivers on my computer option.

  4. If you see a list of hardware types, leave the Show All option selected, and click Next.

  5. Select the Have Disk option.

  6. Browse to the extracted folder and open the 32-bit or the 64-bit folder, depending on your system type.
    Note: To view your system type, click Start. Right-click Computer, and then click Properties.

  7. Click the EMAUDIO (32-bit) file or the EMAUDIO64 (64-bit) file. Click OK, and then click Next.

To install the video drivers, complete the following:

  1. Right-click the device, which will have a “!” next to it to indicate a driver issue, and click Update Driver.
    Note: If the driver is being recognized properly but there is still a driver error, the driver will be listed as USB 2861 Device.

  2. Click Browse my computer for driver software.

  3. Select the Let me pick from a list of device drivers on my computer option.

  4. If you see a list of hardware types, leave the Show All option selected, and click Next.

  5. Select the Have Disk option.

  6. Browse to the extracted folder and open the 32-bit or the 64-bit folder, depending on your system type.
    Note: To view your system type, click Start. Right-click Computer, and then click Properties.

  7. Click the EMVIDEO file. Click OK, and then click Next.

You can now open your video capture software to use with your SVID2USB23. 

If you are in North America, make sure that in the Video Capture Software options, you set the Video Format to NTSC-M. Also, make sure that you have it set to capture from S-Video or Composite, depending on what you would like to use.

When you troubleshoot issues with a video capture device, there are some quick tests that you can complete to rule out potential problems. You can test to make sure that the following components are working correctly and are not the source of the issue:

  • Video cables

  • Video source

  • Video capture device

Before you test the video capture device on your computer, make sure that the driver and capture software is installed on your system for your adapter.

To test your setup components, try the following:

  • Use the video cables, source, and capture device in another setup to see if the problem is with the components or the setup.

  • Use a different video cable, source, and capture device in your setup to see if the problem persists. Ideally, you should test a component that you know works in another setup.

When you test your cables, it is recommended that you do the following:

  • Test each cable individually.

  • Use short cables when you are testing.

When you test the video cables and source with the video capture device, make sure that the following is true:

  • Other video destinations work with the same video source. For more information, visit http://www.startech.com/faq/video_capture_cards_source_compatibility.

  • Use as few adapters and extenders as possible.

  • The video source is not copyright protected (for example, HDCP).

  • The video standard (for example, NTSC, PAL, and HDMI) of the video source matches the technical specifications of the video capture device.

To check if the video capture device is detected on a computer running Windows®, complete the following:

  • Press the Windows key + R, type devmgmt.msc, and press Enter to open Device Manager. Check to see if your device is listed under Sound, video and game controllers.

If you do not see the video capture device in Device Manager, visit https://www.startech.com/support/faqs/technical-support?topic=expansion-cards#usb-cannot-detect-windows. If the device is listed with an error, follow the instructions on the www.StarTech.com website to reinstall the drivers.

To check if the video capture device is detected on a computer running Mac, complete the following:

  1. In the upper-left corner of the screen, click the Apple icon.

  2. Click About This Mac.

  3. Click More Info or System Report.

  4. In the connection type, click USB and check for the eMPIA EM2861 chipset.

If you do not see the video capture device in System Information, visit https://www.startech.com/support/faqs/technical-support?topic=expansion-cards#usb-cannot-detect-mac-os.

Installation

Before you install the device, make sure that your operating system is current (for example, the most recent service pack is installed).

  1. Download the latest drivers from the StarTech.com website at http://www.startech.com/Support. The part number and product ID are on the product packaging.

Note: Windows usually saves the files to the Downloads folder that is associated with your user account (for example, C:\Users\your_name\Downloads).

  1. After the download is complete, right-click the zip folder that you downloaded, click Extract All, and complete the instructions. The extracted files should open automatically.

  2. In the list of extracted files, right-click the setup.exe file and click Run as Administrator.

  3. Complete the instructions to install the device drivers.

  4. Press the Windows key + R, type devmgmt.msc, and click OK to open the Device Manager.

  5. Expand the Sound, video and game controllers section and confirm that USB 2861 Device is listed.

  1. Close any video capturing software before you begin.

  2. Download the latest drivers from the StarTech.com website at http://www.startech.com/Support. The part number and product ID are on the product packaging.
    Note: Windows usually saves the files to the Downloads folder that is associated with your user account (for example, C:\Users\your_name\Downloads).

  3. After the download is complete, right-click the zip folder that you downloaded, click Extract All, and complete the instructions.

  4. Press the Windows key + R, type devmgmt.msc, and press Enter to open the Device Manager.

  5. Right-click the device that has “!” next to it, and click Update Driver.

    Note: If the driver is being recognized properly but there is still an error with it, it will be listed as USB EMP Audio Device.

  6. Click Browse my computer for driver software.

  7. Select the Let me pick from a list of device drivers on my computer option.

  8. If a list of hardware types appears, leave the Show All option selected, and click Next.

  9. Select the Have Disk option.

  10. Browse to the extracted folder, open the Windows folder, the Twain Driver folder, and the Manual Driver folder.

  11. Open the 32-bit or the 64-bit folder, depending on your system type.
    Note: To view your system type, click Start. Right-click Computer, and then click Properties.

  12. Click the EMAUDIO (32-bit) file or the EMAUDIO64 (64-bit) file. Click OK, and then click Next.

To install the video drivers, complete the following:

  1. Right-click the device that has “!” next to it, and click Update Driver.
    Note: If the driver is being recognized properly but there is still an error with it, it will be listed as USB 2861 Device.

  2. Click Browse my computer for driver software.

  3. Select the Let me pick from a list of device drivers on my computer option.

  4. If a list of hardware types appears, leave the Show All option selected, and click Next.

  5. Select the Have Disk option.

  6. Browse to the extracted folder, open the Windows folder, the Twain Driver folder, and the Manual Driver folder.

  7. Open the 32-bit or the 64-bit folder, depending on your system type.
    Note: To view your system type, click Start. Right-click Computer, and then click Properties.

  8. Click the EMVIDEO file. Click OK, and then click Next.

If you are in North America, make sure that the Video Format is set to NTSC-M in the video capture software options. Also, make sure that you have you have the Video format set to capture from S-Video or Composite, depending on which you want to use.

Hur man

To confirm that the Mac OS detects your USB device, complete the following:

  1. Click the Apple icon.
  2. Click About This Mac.
  3. Click More Info or System Report.
  4. Under the appropriate heading, confirm that your USB device is listed and that there isn't an error. For example, a network card would be under Ethernet Cards.

You may need to refresh the System Information page after you plug in your device.  To do so, press Command R with the System Information page open.

Your USB device is listed according to the name of the chipset. To determine the name of the chipset of your USB device, navigate to www.StarTech.com and look on the Technical Specifications tab for your product.

Compliance and safety

Compliance letters

Safety Measures

  • If product has an exposed circuit board, do not touch the product under power.
  • If Class 1 Laser Product. Laser radiation is present when the system is open.
  • Wiring terminations should not be made with the product and/or electric lines under power.
  • Product installation and/or mounting should be completed by a certified professional as per the local safety and building code guidelines.
  • Cables (including power and charging cables) should be placed and routed to avoid creating electric, tripping or safety hazards.
* Produkters utseende och specifikationer kan komma att ändras utan förvarning.
Tillbaka till toppen