Produktsökning

Dual-Bay 2,5" SATA SSD-/HDD-rack för 3,5"-fack - fackfri - RAID

Anslut och byt enkelt två 2,5-tums SATA hårddiskar eller SSD-enheter via en enda 3,5-tums frontplats.

Produkt ID: HSB225S3R

  • SATA III (6Gbps) diskgränssnitt, kompatibel med SATA I, II och III
  • Ökad diskkapacitet, prestanda eller dataredundans med flera RAID-lägen: RAID 0, RAID 1, spanning
  • Stöder upp till två 2,5" SATA SSD/HDD:enheter
Ditt pris
€93,99 EUR excl. VAT
€117,49 EUR incl. VAT

Med det här racket kan du installera två 2,5-tums SATA-hårddiskar eller SSD-enheter via en enda 3.5-tumsplats. Med konfigurerbart RAID-stöd är detta SATA-rack den perfekta datalagringslösningen.

Flexibel lagringslösning

Konfigurera och ordna dina enheter för ökad diskkapacitet eller lägg till dataredundans, med inbyggd hårdvaru-RAID-funktionalitet. HDD-racket erbjuder användning oberoende av mjukvara och operativsystem. Med flera RAID-alternativ, som RAID 0, RAID 1, spanning eller JBOD, kan du bygga den datalagringslösning som passar dig bäst.

Snabbyt dina SATA-enheter

Detta fackfria och SATA-bakpanel med hot swap gör det enkelt att installera och ta bort dina enheter från ditt datorsystem när du vill utan att du behöver öppna höljet varje gång. Det underlättar även säkerhetskopiering för dataåterställning och arkivering.

Designad för hållbarhet och problemfri användning

Det flyttbara hårddiskfacket/bakplanet är av slitstark aluminium för lång livslängd. SATA-bakplanet har dessutom LED-indikatorer för ström, hårddiskaktivitet och körstatus för underlättad övervakning av dina hårddiskar och RAID-enheter.

HSB225S3R täcks av StarTech.coms 2-årsgaranti och gratis livstidsgaranti på teknisk support.

Användning

  • Perfekt för IT-personal som systemintegratörer och administratörer som har behov av en flexibel lagringshantering
  • Bygg upp din stegvisa eller externa lagringsbackup genom att ansluta hot-swap-enheter till din server eller stationära dator
  • Spara tid i arbetsintensiva miljöer där enheter ofta måste bytas

Partnernummer

  • Ingram Micro Sweden V934221
  • UPC 065030872454

Specifikationer

Warranty Information Warranty 2 Years
Förpackning Fraktvikt (förpackning) 345,0 g [12,2 oz]
Package Length 19,8 cm [7,8 in]
Package Width 15,0 cm [5,9 in]
Package Height 45,0 mm [1,8 in]
Hårdvara Nyckellås Nej
Fläkt(ar) Nej
Gränssnitt SATA
Antal enheter 2
Enhetsstorlek 2.5in
Enhetstyp SATA
Enhetsinstallation Löstagbar
Antal 2,5 tums fack 2
Stödda enhetshöjd(er) 5mm
7mm
9.5mm
Chipset-ID ASMedia - ASM1092R
Indikatorer 2 - LED-indikatorer Link/Aktivitet/Fel
Kontakt(er) 1 - Enhetskontakter 22 pin SATA Data + Power (7 + 15 pin) Receptacle
1 - Värdkontakter Molex (4-stifts, PWM)
7 pin SATA Data Receptacle
Miljö Drifttemperatur 0⁰C to 55⁰C (32°F to 131°F)
Förvaringstemperatur -20⁰C to 55⁰C (-4°F to 131°F)
Luftfuktighet 5 % ~ 65 %
Prestanda TRIM Support Ja
S.M.A.R.T. Support Ja
Typ och hastighet SATA III (6 Gbps)
Port Multiplier Ja
RAID Ja
RAID-lägen som stöds RAID 0 (stripade enheter)
Hot swap-förmåga Ja
RAID-lägen som stöds RAID 1 (speglade enheter)
Inlänkningshastighet 50 000
RAID-lägen som stöds BIG (Omfång eller sammanfogning)
JBOD - (Just a Bunch of Disks)
Särskilda anmärkningar/krav Obs. TRIM and SMART have limited support while in a RAID configuration. A SATA controller with Port Multiplier support is required, in addition to the product configured in JBOD mode, to provide full TRIM and SMART support.
Utseende Färg Svart
Kabinettyp Aluminium och plast
Maximal enhetshöjd 9,5 mm [0,4 in]
Produktlängd 14,0 cm [5,5 in]
Produktbredd 10,1 cm [4,0 in]
Produkthöjd 25,0 mm [1,0 in]
Produktvikt 220,0 g [7,8 oz]
Vad det är i lådan 1 - Ingår i paketet Flyttbara ställ
SATA-datakabel
SATA till LP4-adapter
Paket med installationsskruvar
snabbstartsguide

Tillbehör

LSATA6

6in Latching SATA Cable

Secure latching SATA cable designed for new system boards and SATA hard drives

Ditt pris
€3,99 EUR excl. VAT
€4,99 EUR incl. VAT
BRACKETFDBK

Monteringsadapter 3,5 till 5,25 tum för framsida

Monteringsadapter för framsida

Ditt pris
€6,99 EUR excl. VAT
€8,74 EUR incl. VAT
LSATA12

30 cm SATA-kabel med lås

SATA-kontakter med lås, för säkert fastsatta hårddiskinstallationer.

Ditt pris
€3,99 EUR excl. VAT
€4,99 EUR incl. VAT
LSATA18

45 cm SATA-kabel med lås

SATA-hårddiskkabel med låsbara SATA-kontakter, ger hårddiskinstallationer som sitter säkert.

Ditt pris
€4,99 EUR excl. VAT
€6,24 EUR incl. VAT
LSATA24

24in Latching SATA Cable

SATA hard drive cable, with latching SATA connectors, for securely fastened hard drive installations.

Ditt pris
€5,99 EUR excl. VAT
€7,49 EUR incl. VAT
Utgått
LSATARND12

30 cm rund SATA-kabel med lås

Anslut SATA-enheter med lås och garantera optimalt luftflöde till ett dator- eller serverchassi

Ditt pris
€3,99 EUR excl. VAT
€4,99 EUR incl. VAT
Utgått
LSATARND18

18in Latching Round SATA Cable

Connect latching SATA drives while helping to ensure optimal airflow throughout a desktop or server case

Ditt pris
€4,99 EUR excl. VAT
€6,24 EUR incl. VAT
Utgått
LSATARND24

24in Latching Round SATA Cable

Connect latching SATA drives while helping to ensure optimal airflow throughout a desktop or server case

Ditt pris
€5,99 EUR excl. VAT
€7,49 EUR incl. VAT
PYO2L

LP4 till 2x LP4 ström Y-splitterkabel M/F

Anslut två LP4-enheter (CD/DVD-ROM-enheter etc.) till en enda LP4-kontakt

Ditt pris
€2,99 EUR excl. VAT
€3,74 EUR incl. VAT
PYO2LSATA

6in Latching SATA Power Y Splitter Cable Adapter - M/F

Add an extra SATA power outlet to your PC Power Supply

Ditt pris
€5,99 EUR excl. VAT
€7,49 EUR incl. VAT
LP4SATAFM6IN

15 cm SATA till LP4- strömkabeladapter – F/M

Anslut en IDE-hårddisk till en seriell ATA-strömkontakt

Ditt pris
€3,99 EUR excl. VAT
€4,99 EUR incl. VAT

Drivers/Downloads

Prata med en rådgivare.

Vi är alltid redo att hjälpa dig med alla dina frågor.

Direktchatt (opens in new window)

Diagram:

Datasheet

Produktsupport

Prata med en rådgivare.

Vi är alltid redo att hjälpa dig med alla dina frågor.

Direktchatt (opens in new window)

Vanliga frågor

Problemsökning

When you troubleshoot issues with a hard drive rack, there are some quick tests that you can complete to rule out potential problems. You can test to make sure that the following components are working correctly and are not the source of the issue:

  • SATA and SAS cables
  • Hard drives
  • Hard drive rack

To test your setup components, try the following:

  • Use the cables, hard drives, and hard drive rack in another setup to see if the problem is with the components or the setup.
  • Use a different cable, hard drive, and hard drive rack in your setup to see if the problem persists. Ideally, you should test a component that you know works in another setup.

When you test the hard drive and hard drive rack, it is recommended that you do the following:

  • To check Disk Management, press the Windows key + R, type diskmgmt.msc, and press Enter.  Check to see if your hard drive is listed.
  • If the hard drive is listed with unallocated space, it needs to be formatted. Right-click unallocated and click New Simple Volume. Follow the on-screen instructions to complete the reformatting.

Note: Formatting a hard drive erases all of the data on it. Make sure that you back up all of your data before you reformat the hard drive.

  • If the hard drive is listed as healthy but does not have a drive letter assigned to it, for example, C:, right-click healthy and click Change Drive Letter and Paths. Click Add, assign a drive letter, and click OK.

Note: A formatted hard drive will not show up in Computer or My Computer until it has a drive letter assigned to it.

In order to rebuild a RAID array, you need to replace a physical drive with an identical drive on the same RAID controller. Although standard RAID levels are generally agreed upon throughout the industry, the implementation varies between manufacturers. RAID arrays are typically not accessible when they are moved to another controller, and data may be unrecoverable if the drives are out of order or have been formatted or accessed by another RAID controller.

If a RAID controller has failed, you should get the exact same model of RAID controller.  

Note: If a drive or drives were damaged, it is possible that the RAID array may be permanently unrecoverable.

RAID should not be considered a replacement for backing up your data. If critical data is going onto a RAID array, you should back up the data on another physical drive or logical set of drives.

Rebuild a RAID array

With the following RAID modes, recovery is possible using the same StarTech.com product. Refer to the following table for the appropriate method to use to recover your RAID array.

RAID mode Max # of failed drives Procedure
RAID 1 Only one drive is needed for recovery.
  1. Determine which drive is operational by using the RAID management utility (if available) or test each drive individually on a different hard drive controller (for example, a hard drive docking station or SATA controller).

  2. Replace the failed drive with an identical hard drive.

The array will rebuild and is accessible during the rebuilding process.

RAID 3 Single drive failure will rebuild.
  1. Determine which drive is defective by using the RAID management utility (if available) or with diagnosis LEDs on the controller or enclosure.

  2. Replace with an identical hard drive.

Note: Do not change the order of the drives.

  1. The array may be accessible during the rebuild, but you should let the controller rebuild without interruption so that performance is not compromised.

RAID 5 Single drive failure will rebuild.
  1. Determine which drive is defective by using the RAID management utility (if available) or with diagnosis LEDs on the controller or enclosure.

  2. Replace with an identical hard drive.

Note: Do not change the order of the drives.

  1. The array may be accessible during the rebuild, but you should let the controller rebuild without interruption so that performance is not compromised.

RAID 10 Only one drive in a mirrored set can fail.
  1. Determine which drive is defective by using the RAID management utility (if available) or with diagnosis LEDs on the controller or enclosure.

  2. Replace with an identical hard drive.

Note: Do not change the order of the drives.

  1. The array may be accessible during the rebuild, but you should let the controller rebuild without interruption so that performance is not compromised.

 

Before You Buy

Note: Not all StarTech.com devices support each of the RAID modes described below. For more information on the RAID modes that your device supports, refer to the manual or the StarTech.com product page.

Redundant Array of Independent Disks (RAID) is a virtual disk technology that combines multiple physical drives into one unit. RAID can create redundancy, improve performance, or do both.

RAID should not be considered a replacement for backing up your data. If critical data is going onto a RAID array, it should be backed up to another physical drive or logical set of drives.

The following are terms that are normally used in connection with RAID:

  • Striping: data is split between multiple disks.
  • Mirroring: data is mirrored between multiple disks.
  • Parity: also referred to as a checksum. Parity is a calculated value used to mathematically rebuild data.

Different RAID levels exist for different application requirements.

Refer to the following table for the list of RAID modes offered by some StarTech.com products:

RAID mode Description Operation Advantages Disadvantages Recovery
RAID 0 Striped disks Data is split evenly between two or more disks. Large size and the fastest speed. No redundancy. If one or more drives fails, this results in array failure.
RAID 1 Mirrored disks Two or more drives have identical data on them. A single drive failure will not result in data loss. Speed and size is limited by the slowest and smallest disk. Only one drive is needed for recovery.
RAID 3 Striped set with dedicated parity Data is split evenly between two or more disks, plus a dedicated drive for parity storage. High speeds for sequential read/write operations. Poor performance for multiple simultaneous instructions. A single drive failure will rebuild.
RAID 5 Striped disks with distributed parity Data is split evenly between three or more disks. Parity is split between disks. Large size, fast speed, and redundancy. The total array size is reduced by parity. A single drive failure will rebuild.
RAID 10 1+0; Striped set of Mirrored Subset Four or more drives are made into two mirrors that are striped. Larger size and higher speed than RAID-1, and more redundancy than RAID-0. No parity. Only one drive in a mirrored set can fail.
JBOD Just a Bunch Of Disks Any number of drives are accessed independently by the operating system. Software RAID modes can be used. Hardware RAID may have better performance. N/A
Big Spanning or Concatenation Data is written on one drive until it is full, and then the next drive(s) until it or they are full. Creates a very large and simple array.

No redundancy.

N/A
Clone RAID 1 + Spare

Two drives have identical data, plus one drive is used for rebuilding in case of a primary array failure.

Seamless operation when one drive fails in a RAID-1 array. Spare drive is not accessible to the user. Only one drive is needed for recovery.

 

Compliance and safety

Compliance letters

Safety Measures

  • If product has an exposed circuit board, do not touch the product under power.
  • If Class 1 Laser Product. Laser radiation is present when the system is open.
  • Wiring terminations should not be made with the product and/or electric lines under power.
  • Product installation and/or mounting should be completed by a certified professional as per the local safety and building code guidelines.
  • Cables (including power and charging cables) should be placed and routed to avoid creating electric, tripping or safety hazards.
* Produkters utseende och specifikationer kan komma att ändras utan förvarning.
Vänta...
Tillbaka till toppen