Produktsökning
Utgått

2.5” SATA USM™ Enclosure for S2510U33RUSM USM Bay with External USB 3.0 Adapter

Turn a 2.5” HDD/SSD into a USM compatible USB 3.0 enclosure

Produkt ID: S2510U33USM

  • Designed for Front-Mount Installation with S2510U33RUSM 5.25” USM Bay
  • Fully compatible with Seagate GoFlex®, and other USM devices
  • USB 3.0 to USM Enclosure Adapter Included

The S2510U33USM USM enclosure enables you to insert a 2.5” SATA HDD/SSD into any USM host interface including the StarTech.com S2510U33RUSM 5.25" USM bay, and Seagate GoFlex® devices. To ensure you get the most from your SATA III drive, the enclosure supports transfer speeds up to 6.0 Gbps.

USM (Universal Storage Module) is a portable drive standard that interfaces with SATA and enables you to hot-swap drives between multiple host devices, such as PCs, notebooks, DVRs and many others.

Using the included USM to USB 3.0 adapter the enclosure can also be connected externally to non-USM host devices via USB. Plus, with support for UASP, the enclosure performs up to 70% faster than conventional USB when paired with a UASP-enabled host controller to utilize the full potential of your SATA III hard drives. See our UASP testing results below for further details.

To ensure compatibility with your computer system, the S2510U33USM supports all of the leading operating systems, including: Microsoft Windows® (8/7/Vista/XP/Server 2008/Server 2003), Apple® OSX (10.9/10.8/10.7/10.6), Linux, and Google Chrome OS™.

The S2510U33USM is backed by a StarTech.com 2-year warranty and free lifetime technical support.

Improved Performance with UASP

UASP is supported in Windows 8, Mac (OSX 10.8 or above), and Linux. In testing UASP performs with a 70% faster read speed and 40% faster write speed over traditional USB 3.0 at peak performance.

UASP Speed Diagram

At the same peak in testing UASP also shows an 80% reduction in required processor resources.

UASP Speed Diagram

Testing results were obtained using an Intel® Ivy Bridge system, a UASP enabled StarTech.com enclosure, and a SATA III solid state drive.

Användning

  • Create a fast, portable external storage solution for desktops, laptops or netbooks
  • Add-on extra storage to almost any USB-enabled computer system
  • Back up your important data to an external storage device
  • Share large files between computers quickly and securely, without a network

Fördelarna med StarTech.com

  • Universal compatibility, with support for third party USM devices including Seagate GoFlex®
  • Maximum portability, with durable aluminum enclosure and external drive access using USB 3.0 adapter
  • 70% Faster than traditional USB 3.0, with UASP support
  • Simplifies managing/mounting backup drives, by adding removable USM internal storage

Partnernummer

  • UPC 065030852678

Kompatibilitet

Specifikationer

Warranty Information Warranty 2 Years
Förpackning Package Height 40 mm [1,6 in]
Package Length 17,5 cm [6,9 in]
Package Width 13 cm [5,1 in]
Fraktvikt (förpackning) 214,5 g [7,6 oz]
Hårdvara Gränssnitt USB 3.0
SATA
Antal enheter 1
Enhetsstorlek 2.5in
Enhetstyp SATA
Enhetsinstallation Fixerad
Chipset-ID ASMedia - ASM1053 - 6G
Indikatorer 1 - LED-indikatorer Hard Drive Power/Activity (Enclosure)
Kontakt(er) 1 - Enhetskontakter SATA data- & ström-kombo (7+15-stifts)
Värdkontakter USB Type-B (9-stifts) USB 3.0
1 - Värdkontakter USM (22-stifts SATA data & ström)
USB 3.0 Micro-B (10-stifts, SuperSpeed)
Miljö Drifttemperatur 0°C to 40°C (32°F to 104°F)
Förvaringstemperatur -20°C to 70°C (-4°F to 158°F)
Luftfuktighet 10% ~ 90% RH
Mjukvara OS-kompatibilitet OS independent; No software or drivers required
Prestanda Typ och hastighet USB 3.0 - 5 Gbit/s
UASP-stöd Ja
Typ och hastighet SATA III (6 Gbps)
Allmänna specifikationer UL94 V0 Flammability rating
Utseende Färg Svart
Kabinettyp Aluminium och plast
Produktlängd 12 cm [4,7 in]
Produktbredd 81 mm [3,2 in]
Produkthöjd 9 mm [0,4 in]
Produktvikt 93,2 g [3,3 oz]
Vad det är i lådan 1 - Ingår i paketet 2.5” USM HDD Enclosure
USM to USB 3.0 interface adapter
Micro USB 3.0 Cable
Instruction Manual

Tillbehör

USB3CAUB1M

1m (3ft) Certified SuperSpeed USB 3.0 A to Micro B Cable - M/M

Connect your Micro-B USB 3.0 devices, with this high-quality USB 3.0 certified cable

Ditt pris
€15,99 EUR excl. VAT
€19,99 EUR incl. VAT

Drivers/Downloads

Prata med en rådgivare.

Vi är alltid redo att hjälpa dig med alla dina frågor.

Direktchatt (opens in new window)

Manual(er):

Datasheet

Produktsupport

Prata med en rådgivare.

Vi är alltid redo att hjälpa dig med alla dina frågor.

Direktchatt (opens in new window)

Vanliga frågor

Problemsökning

When you troubleshoot issues with a hard drive enclosure, there are some quick tests that you can complete to rule out potential problems. You can test to make sure that the following components are working correctly and are not the source of the issue:

  • Cables
  • Hard drives
  • Hard drive enclosure

To test your setup components, try the following:

  • Use the cables, hard drives, and hard drive enclosure in another setup to see if the problem is with the components or the setup.
  • Use a different cable, hard drive, and hard drive enclosure in your setup to see if the problem persists. Ideally, you should test a component that you know works in another setup.

When you test the hard drive and hard drive enclosure, it is recommended that you do the following:

  • To check Disk Management, press the Windows key + R, type diskmgmt.msc, and press Enter. Check to see if your hard drive is listed.
  • If the hard drive is listed with unallocated space, the hard drive needs to be reformatted. Right-click unallocated and click New Simple Volume. Follow the on-screen instructions to complete the reformatting.​

Note: Formatting a hard drive erases all of the data on it. Make sure that you back up all of your data before you reformat the hard drive.​

  • If the hard drive is listed as healthy but does not have a drive letter, for example, C:, right-click healthy and click Change Drive Letter and Paths. Click Add, assign a drive letter, and click OK.

Note: A formatted hard drive will not show up in Computer or My Computer until it has a drive letter assigned to it.

Hur man

To confirm that the Mac OS detects your USB device, complete the following:

  1. Click the Apple icon.
  2. Click About This Mac.
  3. Click More Info or System Report.
  4. Under the appropriate heading, confirm that your USB device is listed and that there isn't an error. For example, a network card would be under Ethernet Cards.

You may need to refresh the System Information page after you plug in your device.  To do so, press Command R with the System Information page open.

Your USB device is listed according to the name of the chipset. To determine the name of the chipset of your USB device, navigate to www.StarTech.com and look on the Technical Specifications tab for your product.

Before You Buy

Hard drive enclosures require power from your system's USB port. Although you can plug in any standard SATA drive, USB ports only supply a limited amount of power and are not able to power all of the hard drives plugged into the system.

The power capabilities of the USB port combined with the power requirements of the attached hard drive will determine if the hard drive enclosure will work in your setup. The power (in mA) supplied by the USB port must be greater than the requirements of the hard drive.

A USB 2.0 port can supply a maximum of 500 mA (0.5 A), and a USB 3.0 port can supply a maximum of 900 mA (0.9 A).

You can usually find the power requirements of your hard drive in the technical specifications on the label of the hard drive or on the manufacturer's website.

To determine if your hard drive will work in this enclosure, on the product page, click the Technical Specifications tab, and do the following:

  • Make sure that the enclosure supports the storage size of your hard drive. If the storage size of your hard drive is larger than what the enclosure was tested with, the hard drive will likely still work with the enclosure.
  • Confirm that your hard drive uses the same interface type as the enclosure. For example, IDE, SATA, or M.2.
  • Make sure that the enclosure supports the physical size of your hard drive, such as 2.5 inches or 3.5 inches.
  • Make sure that the enclosure supports the height of your hard drive. For example, 9 mm or 15 mm.
  • Verify that the power consumption of your hard drive doesn’t exceed the power output of the enclosure. If you’re using multiple hard drives, make sure that the combined power consumption of all of the hard drives doesn’t exceed the power output of the enclosure.

Compliance and safety

Compliance letters

Safety Measures

  • If product has an exposed circuit board, do not touch the product under power.
  • If Class 1 Laser Product. Laser radiation is present when the system is open.
  • Wiring terminations should not be made with the product and/or electric lines under power.
  • Product installation and/or mounting should be completed by a certified professional as per the local safety and building code guidelines.
  • Cables (including power and charging cables) should be placed and routed to avoid creating electric, tripping or safety hazards.
* Produkters utseende och specifikationer kan komma att ändras utan förvarning.
Vänta...
Tillbaka till toppen