Utgått

Gigabit NAS RAID-kabinett med två fack för 3,5" SATA-hårddiskar med WebDAV och mediaserver

Skapa en extern RAID-array för två 3,5" SATA-hårddiskar som du får åtkomst till över ett Gigabit-LAN med WebDAV, FTP och Windows® delningstjänster

Produkt ID: S352BMU3N

  • Nå filer från många olika enheter inklusive smarttelefoner och surfplattor med stöd för iOS- och Android WebDAV-appar från tredje part
  • Strömma musik och videofiler till smart-TV-apparater, Blu-Ray spelare och spelkonsoler med UPnP- och DLNA-stöd
  • Skydda din data med redundans eller öka prestanda & volymkapacitet, med stöd för hårdvaru-RAID (0,1 JBOD)

S352BMU3N NAS RAID-kabinettet med 2 fack gör det möjligt att bygga en säker extern RAID-array med två 3,5" SATA-hårddiskare och ansluta den direkt till ditt Gigabit-nätverk utan en värddator för snabb åtkomst till hela nätverket.

Åtkomst från vilken enhet som helst 

För bred enhetskompatibilitet har NAS-kabinettet WebDAV, vilket ger dig åtkomst till filer från alla enheter i nätverket som har webbläsare, som till exempel en dator, surfplatta, iPhone® eller smarttelefon. Mobilappar från tredje part stöds även för intuitiv och bekant filhantering.

Strömma digital media var som helst på nätverket

För problemfri mediaintegration stöder kabinettet UPnP och DLNA® vilket gör att du kan strömma videor, bilder och musik direkt till en kompatibel smart-TV, Blu-Ray-spelare, digitalbox och TV-spelkonsol.

Öka säkerheten eller individuell enhetskapacitet

För att få bättre prestanda och säkrare dataredundans har kabinettet en inbyggd hårdvaru-RAID-kontroller med stöd för RAID 0, 1 och JBOD.

Problemfri fildelning

För enklare fildelning stöder kabinettet FTP- och SMB-tjänster, vilket gör att du kan dela filer offentligt över nätverket eller Internet med valfri klientprogramvara. 

Förbättra överföringshastigheter med USB 3.0 DAS

Öka hastigheten lokalt med USB DAS (Direct-Attached Storage), vilket gör att du kan ansluta kabinettet till datorn med USB 3.0 för att få överföringshastigheter på upp till 5 Gbps.

För att garantera kompatibilitet med ditt datorsystem stöder S352BMU3N alla ledande operativsystem, inklusive: Microsoft Windows® (8/7/Vista/XP/Server 2008/Server 2003), Apple® OSX (10.9/10.8/10.7/10.6), Linux och Google Chrome OS™.

S352BMU3N maximerar både hållbarhet och pålitlighet med inbyggd fläkt, solid aluminiumkonstruktion och täcks av StarTech.coms 2-årsgaranti och gratis livstidsgaranti på teknisk support.

Användning

  • När man enkelt behöver kunna överföra lagrad data mellan olika datorsystem och stora externa lagringsutrymmen för säkerhetskopiering/arkivering
  • Få åtkomst till filer på ett nätverk från en enhet med webbläsare via ett kontorsnätverk
  • Installera en redundant RAID-array för att skydda filer mot enhetsfel
  • Nå enheten med surfplattor och smarttelefoner som inte har ett filhanteringsverktyg
  • Skapa en molnlagringslösning

Fördelarna med StarTech.com

  • Bred enhetskompatibilitet med datorer, smarttelefoner och surfplattor med WebDAV som ger kompatibilitet med mobilappar från tredje part
  • Problemfri användning med NAS-funktion som ger enhetsåtkomst över hela nätverket oberoende av en dator
  • Få högre prestanda eller säker dataredundans med flera RAID-lägen

Partnernummer

  • UPC 065030854719

Kompatibilitet

Specifikationer

Warranty Information Warranty 2 Years
Förpackning Package Height 18,1 cm [7,1 in]
Package Length 14 cm [5,5 in]
Fraktvikt (förpackning) 1,4 kg [3,0 lb]
Package Width 25,5 cm [10,0 in]
Hårdvara Gränssnitt RJ45 (Gigabit Ethernet)
USB 3.0
Antal enheter 2
Enhetsstorlek 3.5in
Enhetstyp SATA
Enhetsinstallation Fixerad
Antal interna 3,5 tums fack 2
Fläkt(ar) Ja
1 - Flaktar 40 mm
Fläktlagerstyp Kullager
Chipset-ID JMicron - JCS358
Indikatorer 1 - LED-indikatorer Ström
Enhet 1 aktivitet
Enhet 2 aktivitet
Kontakt(er) 2 - Enhetskontakter SATA data- & ström-kombo (7+15-stifts)
1 - Värdkontakter USB Type-B (9-stifts) USB 3.0
RJ-45
Miljö Drifttemperatur 5°C to 35°C (41°F to 95°F)
Förvaringstemperatur -20°C to 50°C (-4°F to 122°F)
Luftfuktighet 20 ~ 80 % RH
Mjukvara OS-kompatibilitet OS independent; No software or drivers required
Prestanda Maximal dataöverföringshastighet 1000 mbps (Ethernet)
5 Gbps (USB 3.0)
Typ och hastighet USB 3.0 - 5 Gbit/s
UASP-stöd Nej
Typ och hastighet SATA III (6 Gbps)
RAID Ja
RAID-lägen som stöds RAID 1 (speglade enheter)
JBOD - (Just a Bunch of Disks)
RAID 0 (stripade enheter)
Maximal enhetskapacitet För närvarande testad med hårdiskar på upp till 4 TB 7200 RPM
Hot swap-förmåga Nej
Ström Power Source AC-adapter medföljer
Inspänning 100 - 240 AC
Utspänning 12V DC
Utström 3 A
Kontakttyp M
Strömförbrukning 36
Utseende Produktvikt 627 g [22,1 oz]
Färg Svart
Kabinettyp Aluminium
Produktlängd 18,0 cm [7,1 in]
Produktbredd 11,6 cm [4,5 in]
Produkthöjd 85 mm [3,3 in]
Vad det är i lådan 1 - Ingår i paketet NAS HDD RAID-kabinett
Ethernet-kabel
USB 3.0-kabel
Universal strömadapter: endast redo för NA/EU/UK om du köper i NA/EU/UK; endast redo för Australien och Nya Zeeland om du köper i Australien eller Nya Zeeland.
Paket med gummifötter
Snabbinstallationsguide

Tillbehör

Utgått
USB3SAB3MRA

3m Black SuperSpeed USB 3.0 Cable - Right Angle A to B - M/M

Connect USB 3.0 devices, even in hard to reach areas and tight spaces

Ditt pris
€10,99 EUR excl. VAT
€13,74 EUR incl. VAT
Utgått
USB3SAB2MRA

2m Black SuperSpeed USB 3.0 Cable - Right Angle A to B - M/M

Connect USB 3.0 devices, even in hard to reach areas and tight spaces

Ditt pris
€3,99 EUR excl. VAT
€4,99 EUR incl. VAT
USB3SAB1MRA

1m Black SuperSpeed USB 3.0 Cable - Right Angle A to B - M/M

Connect USB 3.0 devices, even in hard to reach areas and tight spaces

Ditt pris
€10,99 EUR excl. VAT
€13,74 EUR incl. VAT
USB3CAB2M

2m (6 ft) Certified SuperSpeed USB 3.0 A to B Cable - M/M

Connect your USB 3.0 devices, with this high-quality USB 3.0 certified cable

Ditt pris
€16,99 EUR excl. VAT
€21,24 EUR incl. VAT
USB3SAB10

10 ft SuperSpeed USB 3.0 Cable A to B - M/M

Connect to your external devices and transfer data at 10x the speed of USB 2.0

Ditt pris
€11,99 EUR excl. VAT
€14,99 EUR incl. VAT
USB3SAB3BK

3 ft Black SuperSpeed USB 3.0 Cable A to B - M/M

Connect to your external solutions and transfer data at 10x the speed of USB 2.0

Ditt pris
€6,99 EUR excl. VAT
€8,74 EUR incl. VAT
USB3CAB1M

1m (3ft) Certified SuperSpeed USB 3.0 A to B Cable - M/M

Connect your USB 3.0 devices with this high-quality USB 3.0 certified cable

Ditt pris
€13,99 EUR excl. VAT
€17,49 EUR incl. VAT
SVA12M5NA

DC-strömadapter - 12 V, 5 A

Byt ut din borttappade eller trasiga strömadapter

Ditt pris
€65,99 EUR excl. VAT
€82,49 EUR incl. VAT

Drivers/Downloads

Prata med en rådgivare.

Vi är alltid redo att hjälpa dig med alla dina frågor.

Direktchatt (opens in new window)

Inbyggd programvara

Datasheet

Produktsupport

Prata med en rådgivare.

Vi är alltid redo att hjälpa dig med alla dina frågor.

Direktchatt (opens in new window)

Vanliga frågor

Problemsökning

When you troubleshoot issues with a hard drive enclosure, there are some quick tests that you can complete to rule out potential problems. You can test to make sure that the following components are working correctly and are not the source of the issue:

  • Cables
  • Hard drives
  • Hard drive enclosure

To test your setup components, try the following:

  • Use the cables, hard drives, and hard drive enclosure in another setup to see if the problem is with the components or the setup.
  • Use a different cable, hard drive, and hard drive enclosure in your setup to see if the problem persists. Ideally, you should test a component that you know works in another setup.

When you test the hard drive and hard drive enclosure, it is recommended that you do the following:

  • To check Disk Management, press the Windows key + R, type diskmgmt.msc, and press Enter. Check to see if your hard drive is listed.
  • If the hard drive is listed with unallocated space, the hard drive needs to be reformatted. Right-click unallocated and click New Simple Volume. Follow the on-screen instructions to complete the reformatting.​

Note: Formatting a hard drive erases all of the data on it. Make sure that you back up all of your data before you reformat the hard drive.​

  • If the hard drive is listed as healthy but does not have a drive letter, for example, C:, right-click healthy and click Change Drive Letter and Paths. Click Add, assign a drive letter, and click OK.

Note: A formatted hard drive will not show up in Computer or My Computer until it has a drive letter assigned to it.

Note: Any data currently on the drives will be lost during this process. You need to back up all of your data before you set a RAID mode.

To set a RAID mode, complete the following:

  1. Turn off the hard drive enclosure.
  2. Set the RAID switch to the RAID mode that you want to set.

Note: JBOD is only supported in a DAS (Direct-Attached Storage) connection. If you set JBOD in a NAS (Network-Attached Storage) connection, only one hard drive will be accessible.

  1. Press and hold the Set button and turn on the hard drive enclosure.
  2. When the enclosure is turned on, release the Set button. You may hear a buzzer sound coming from the enclosure, which indicates that you set or changed a RAID mode.

Note: When you change the RAID mode again, complete the steps above to set the unit back to JBOD before you set a different RAID mode.

In order to rebuild a RAID array, you need to replace a physical drive with an identical drive on the same RAID controller. Although standard RAID levels are generally agreed upon throughout the industry, the implementation varies between manufacturers. RAID arrays are typically not accessible when they are moved to another controller, and data may be unrecoverable if the drives are out of order or have been formatted or accessed by another RAID controller.

If a RAID controller has failed, you should get the exact same model of RAID controller.  

Note: If a drive or drives were damaged, it is possible that the RAID array may be permanently unrecoverable.

RAID should not be considered a replacement for backing up your data. If critical data is going onto a RAID array, you should back up the data on another physical drive or logical set of drives.

Rebuild a RAID array

With the following RAID modes, recovery is possible using the same StarTech.com product. Refer to the following table for the appropriate method to use to recover your RAID array.

RAID mode Max # of failed drives Procedure
RAID 1 Only one drive is needed for recovery.
  1. Determine which drive is operational by using the RAID management utility (if available) or test each drive individually on a different hard drive controller (for example, a hard drive docking station or SATA controller).

  2. Replace the failed drive with an identical hard drive.

The array will rebuild and is accessible during the rebuilding process.

RAID 3 Single drive failure will rebuild.
  1. Determine which drive is defective by using the RAID management utility (if available) or with diagnosis LEDs on the controller or enclosure.

  2. Replace with an identical hard drive.

Note: Do not change the order of the drives.

  1. The array may be accessible during the rebuild, but you should let the controller rebuild without interruption so that performance is not compromised.

RAID 5 Single drive failure will rebuild.
  1. Determine which drive is defective by using the RAID management utility (if available) or with diagnosis LEDs on the controller or enclosure.

  2. Replace with an identical hard drive.

Note: Do not change the order of the drives.

  1. The array may be accessible during the rebuild, but you should let the controller rebuild without interruption so that performance is not compromised.

RAID 10 Only one drive in a mirrored set can fail.
  1. Determine which drive is defective by using the RAID management utility (if available) or with diagnosis LEDs on the controller or enclosure.

  2. Replace with an identical hard drive.

Note: Do not change the order of the drives.

  1. The array may be accessible during the rebuild, but you should let the controller rebuild without interruption so that performance is not compromised.

 

Du bör inte uppgradera enhetens inbyggda programvara om du inte har några problem med enhetens funktioner. Du behöver bara uppgradera om du har problem med enheten och är säker på att problemet är den inbyggda programvaran.  Du kan bekräfta detta genom att läsa igenom den medföljande dokumentationen eller kontakta vår tekniska avdelning. Felaktig uppgradering av inbyggd programvara kan resultera i minskade prestanda så vi rekommenderar att du kontaktar StarTech.com först.

Hur man

To confirm that the Mac OS detects your USB device, complete the following:

  1. Click the Apple icon.
  2. Click About This Mac.
  3. Click More Info or System Report.
  4. Under the appropriate heading, confirm that your USB device is listed and that there isn't an error. For example, a network card would be under Ethernet Cards.

You may need to refresh the System Information page after you plug in your device.  To do so, press Command R with the System Information page open.

Your USB device is listed according to the name of the chipset. To determine the name of the chipset of your USB device, navigate to www.StarTech.com and look on the Technical Specifications tab for your product.

Before You Buy

Time Machine requires the protocols CIFS (Common Internet File System) and SMB (Server Message Block) to function. When you use this device as a NAS device, these protocols are not supported. If you use this device as a DAS (Direct Attach Storage) device, you can use Time Machine.

To determine if your hard drive will work in this enclosure, on the product page, click the Technical Specifications tab, and do the following:

  • Make sure that the enclosure supports the storage size of your hard drive. If the storage size of your hard drive is larger than what the enclosure was tested with, the hard drive will likely still work with the enclosure.
  • Confirm that your hard drive uses the same interface type as the enclosure. For example, IDE, SATA, or M.2.
  • Make sure that the enclosure supports the physical size of your hard drive, such as 2.5 inches or 3.5 inches.
  • Make sure that the enclosure supports the height of your hard drive. For example, 9 mm or 15 mm.
  • Verify that the power consumption of your hard drive doesn’t exceed the power output of the enclosure. If you’re using multiple hard drives, make sure that the combined power consumption of all of the hard drives doesn’t exceed the power output of the enclosure.

Note: Not all StarTech.com devices support each of the RAID modes described below. For more information on the RAID modes that your device supports, refer to the manual or the StarTech.com product page.

Redundant Array of Independent Disks (RAID) is a virtual disk technology that combines multiple physical drives into one unit. RAID can create redundancy, improve performance, or do both.

RAID should not be considered a replacement for backing up your data. If critical data is going onto a RAID array, it should be backed up to another physical drive or logical set of drives.

The following are terms that are normally used in connection with RAID:

  • Striping: data is split between multiple disks.
  • Mirroring: data is mirrored between multiple disks.
  • Parity: also referred to as a checksum. Parity is a calculated value used to mathematically rebuild data.

Different RAID levels exist for different application requirements.

Refer to the following table for the list of RAID modes offered by some StarTech.com products:

RAID mode Description Operation Advantages Disadvantages Recovery
RAID 0 Striped disks Data is split evenly between two or more disks. Large size and the fastest speed. No redundancy. If one or more drives fails, this results in array failure.
RAID 1 Mirrored disks Two or more drives have identical data on them. A single drive failure will not result in data loss. Speed and size is limited by the slowest and smallest disk. Only one drive is needed for recovery.
RAID 3 Striped set with dedicated parity Data is split evenly between two or more disks, plus a dedicated drive for parity storage. High speeds for sequential read/write operations. Poor performance for multiple simultaneous instructions. A single drive failure will rebuild.
RAID 5 Striped disks with distributed parity Data is split evenly between three or more disks. Parity is split between disks. Large size, fast speed, and redundancy. The total array size is reduced by parity. A single drive failure will rebuild.
RAID 10 1+0; Striped set of Mirrored Subset Four or more drives are made into two mirrors that are striped. Larger size and higher speed than RAID-1, and more redundancy than RAID-0. No parity. Only one drive in a mirrored set can fail.
JBOD Just a Bunch Of Disks Any number of drives are accessed independently by the operating system. Software RAID modes can be used. Hardware RAID may have better performance. N/A
Big Spanning or Concatenation Data is written on one drive until it is full, and then the next drive(s) until it or they are full. Creates a very large and simple array.

No redundancy.

N/A
Clone RAID 1 + Spare

Two drives have identical data, plus one drive is used for rebuilding in case of a primary array failure.

Seamless operation when one drive fails in a RAID-1 array. Spare drive is not accessible to the user. Only one drive is needed for recovery.

 

Compliance and safety

Compliance letters

Safety Measures

  • If product has an exposed circuit board, do not touch the product under power.
  • If Class 1 Laser Product. Laser radiation is present when the system is open.
  • Wiring terminations should not be made with the product and/or electric lines under power.
  • Product installation and/or mounting should be completed by a certified professional as per the local safety and building code guidelines.
  • Cables (including power and charging cables) should be placed and routed to avoid creating electric, tripping or safety hazards.
* Produkters utseende och specifikationer kan komma att ändras utan förvarning.
Tillbaka till toppen
Vänta...