Extra 3.5" Hot Swap Hard Drive Tray for SAT3540ER S352U2RER S352U2RERC

Turn additional 3.5in SATA hard drives into extra hot-swap drives for the SAT3540ER S352U2RER S352U2RERC

Produkt ID: SAT3500TRAY

  • Steel mounting rails for durability
  • Designed with an easy to use handle release mechanism

Specifically designed for use with StarTech.com's , , and multi-drive Hard Drive enclosures, this extra Hard Drive Tray features an easy to use handle release mechanism for quick removal and insertion of hard drives.

An extra hard drive tray is the ideal solution for multiple mobile users of same system, high-speed back-ups of critical files, moving large files from one computer to another, and performing external backups with off site storage.


  • Performing off site storage or transportation of external storage/backup
  • Mobile storage applications where multiple removable hard drives being used on same system
  • Easily archive and retrieve archived information
  • Swapping hard drives in an incremental backup solution
  • Transporting Data for your office to home

Fördelarna med StarTech.com

  • Supports all 3.5in SATA hard drives


  • UPC 065030836579



Warranty Information Warranty 2 Years
Förpackning Package Length 21,3 cm [8,4 in]
Package Width 45 mm [1,8 in]
Package Height 14,5 cm [5,7 in]
Fraktvikt (förpackning) 0,3 kg [0,6 lb]
Hårdvara Antal enheter 1
Enhetsstorlek 3.5in
Enhetstyp SATA
Mjukvara OS-kompatibilitet OS independent; No software or drivers required
Prestanda UASP-stöd Nej
Hot swap-förmåga Ja
Utseende Färg Svart
Kabinettyp Aluminium
Produktlängd 18,9 cm [7,4 in]
Produktbredd 11,5 cm [4,5 in]
Produkthöjd 2,7 cm [1,1 in]
Produktvikt 195 g [6,9 oz]
Vad det är i lådan 1 - Ingår i paketet Extra Hard Drive Tray


Prata med en rådgivare.

Vi är alltid redo att hjälpa dig med alla dina frågor.

Direktchatt (opens in new window)



Prata med en rådgivare.

Vi är alltid redo att hjälpa dig med alla dina frågor.

Direktchatt (opens in new window)

Vanliga frågor


When you troubleshoot issues with a hard drive enclosure, there are some quick tests that you can complete to rule out potential problems. You can test to make sure that the following components are working correctly and are not the source of the issue:

  • Cables
  • Hard drives
  • Hard drive enclosure

To test your setup components, try the following:

  • Use the cables, hard drives, and hard drive enclosure in another setup to see if the problem is with the components or the setup.
  • Use a different cable, hard drive, and hard drive enclosure in your setup to see if the problem persists. Ideally, you should test a component that you know works in another setup.

When you test the hard drive and hard drive enclosure, it is recommended that you do the following:

  • To check Disk Management, press the Windows key + R, type diskmgmt.msc, and press Enter. Check to see if your hard drive is listed.
  • If the hard drive is listed with unallocated space, the hard drive needs to be reformatted. Right-click unallocated and click New Simple Volume. Follow the on-screen instructions to complete the reformatting.​

Note: Formatting a hard drive erases all of the data on it. Make sure that you back up all of your data before you reformat the hard drive.​

  • If the hard drive is listed as healthy but does not have a drive letter, for example, C:, right-click healthy and click Change Drive Letter and Paths. Click Add, assign a drive letter, and click OK.

Note: A formatted hard drive will not show up in Computer or My Computer until it has a drive letter assigned to it.

Before You Buy

To determine if your hard drive will work in this enclosure, on the product page, click the Technical Specifications tab, and do the following:

  • Make sure that the enclosure supports the storage size of your hard drive. If the storage size of your hard drive is larger than what the enclosure was tested with, the hard drive will likely still work with the enclosure.
  • Confirm that your hard drive uses the same interface type as the enclosure. For example, IDE, SATA, or M.2.
  • Make sure that the enclosure supports the physical size of your hard drive, such as 2.5 inches or 3.5 inches.
  • Make sure that the enclosure supports the height of your hard drive. For example, 9 mm or 15 mm.
  • Verify that the power consumption of your hard drive doesn’t exceed the power output of the enclosure. If you’re using multiple hard drives, make sure that the combined power consumption of all of the hard drives doesn’t exceed the power output of the enclosure.

Compliance and safety

Compliance letters

Safety Measures

  • If product has an exposed circuit board, do not touch the product under power.
  • If Class 1 Laser Product. Laser radiation is present when the system is open.
  • Wiring terminations should not be made with the product and/or electric lines under power.
  • Product installation and/or mounting should be completed by a certified professional as per the local safety and building code guidelines.
  • Cables (including power and charging cables) should be placed and routed to avoid creating electric, tripping or safety hazards.
* Produkters utseende och specifikationer kan komma att ändras utan förvarning.
Tillbaka till toppen