Produktsökning
Utgått

Dual 2.5in to Single 3.5in SATA Hard Drive Adapter

Add two 2.5in SATA hard drives to a single 3.5in drive bay

Produkt ID: SATA35252X

  • Includes mounting screws and LP4 to SATA power splitter cable
  • Unique mounting design for dual 2.5in hard drives

This SATA HDD Adapter allows one or two 2.5in SATA (SATA, SATA II, SATA III) hard drives (HDD) or solid state drives (SSD) to be installed into a single 3.5in drive bay and connected to the host computer in place of a 3.5in SATA hard drive.

Simply mount the 2.5in SATA hard drives to the adapter board, then install the adapter in the computer as though it were a single drive.

To power the installed drives, the hard drive adapter includes an LP4 to dual SATA power 'Y' cable that lets you connect both drives to one of the computer power supply LP4 power connections. Then, it's as easy as connecting each of the drives to the motherboard SATA data connectors.

Användning

  • Use spare 2.5" drives to expand on a desktop's storage capacity
  • Add additional hard drives to a system for RAID applications where physical space is limited

Fördelarna med StarTech.com

  • Install up to two 2.5" hard drives or solid state drives into a desktop 3.5" drive bay
  • Backed by a StarTech.com lifetime warranty and free lifetime technical support

Partnernummer

  • UPC 065030827850

Specifikationer

Warranty Information Warranty Lifetime
Förpackning Package Length 17,3 cm [6,8 in]
Package Width 28 mm [1,1 in]
Package Height 13,7 cm [5,4 in]
Fraktvikt (förpackning) 120 g [4,2 oz]
Miljö Drifttemperatur 0°C to 60°C (32°F to 140°F)
Luftfuktighet Max 95% RH
Utseende Färg Grön
Produktlängd 10,8 cm [4,3 in]
Produktbredd 10,2 cm [4,0 in]
Produkthöjd 11 mm [0,4 in]
Produktvikt 70 g [2,5 oz]
Vad det är i lådan 1 - Ingår i paketet 2.5" to 3.5" Adapter
Screw Kit
Power Cable
Instruction Manual

Drivers/Downloads

Prata med en rådgivare.

Vi är alltid redo att hjälpa dig med alla dina frågor.

Direktchatt (opens in new window)

Manual(er):

Datasheet

Produktsupport

Prata med en rådgivare.

Vi är alltid redo att hjälpa dig med alla dina frågor.

Direktchatt (opens in new window)

Compliance and safety

Compliance letters

Safety Measures

  • If product has an exposed circuit board, do not touch the product under power.
  • If Class 1 Laser Product. Laser radiation is present when the system is open.
  • Wiring terminations should not be made with the product and/or electric lines under power.
  • Product installation and/or mounting should be completed by a certified professional as per the local safety and building code guidelines.
  • Cables (including power and charging cables) should be placed and routed to avoid creating electric, tripping or safety hazards.
* Produkters utseende och specifikationer kan komma att ändras utan förvarning.
Vänta...
Tillbaka till toppen