USB 3.0 till SATA-hårddisk dockningsstation för 2,5/3,5 HDD

Möjliggör snabb växlingsbar åtkomst till din 2,5 tums- eller 3,5 tums-hårddisk via USB 3.0

Produkt ID: SATDOCKU3S

  • SuperSpeed USB 3.0-kompatibelt värdgränssnitt med överföringshastigheter på upp till 5 Gbps
  • High speed USB 2.0-kompatibelt värdgränssnitt med överföringshastigheter på upp till 480 Mbps
  • Patenterad mekanism för enhetsutmatning
Ditt pris
€64,99 EUR excl. VAT
€81,24 EUR incl. VAT

Dockningsstationen SATDOCKU3S för USB 3.0-hårddiskar ger fullständig och ögonblicklig åtkomst till alla 2,5" och 3,5" SATA- (SATA, SATA II, SATA III) hårddiskar (HDD) eller solid state-enheter (SDD), utan att du behöver installera enheten i datorn eller installera den i ett externt kabinett. Hårddiskar med stor kapacitet (testat med upp till 4 TB 3,5"- och 1 TB 2,5"-hårddiskar) kan användas för att betydligt öka dina datorers lagrings-/säkerhetskopieringskapacitet.

Anslut värddatorn via en enda SuperSpeed USB 3.0- eller en USB 2.0-anslutning, hårddiskdockningsstation har en smidig plug-and-play-lagringslösning som ger omedelbar åtkomst till hårddisken utan att man behöver starta om.

HDD-dockningsstationen bygger på enastående datagenomströmning via USB 3.0 och klarar av överföringshastigheter upp till 5 Gbps, vilket gör den till det snabbaste sättet att få åtkomst till data från en extern enhet. Dubblera värdet på dockningsstationen med en adapter för anslutning mellan SATA- och IDE-hårddiskar (SAT2IDEADP) som gör så att du kan använda en 2,5"- eller 3,5"-IDE-hårddisk i ett fack för SATA-hårddiskar.

För att garantera kompatibilitet med ditt datorsystem stöder SATDOCKU3S alla ledande OS-plattformar, inklusive: Microsoft Windows®, Apple® OSX, Linux och Google Chrome OS™.

Användning

  • För dataåterställningsspecialister som snabbt behöver komma åt enheter för säkerhetskopiering
  • Säkerhetskopiera data snabbt till en extern hårddisk för arkivering
  • Tekniker som testar eller utvärderar flera hårddiskar
  • Dra nytta av nya bärbara och stationära datorer med USB 3.0-anslutningsbarhet
  • Uppgradera från USB 2.0-hårddiskdockningsstation till snabbare USB 3.0

Fördelarna med StarTech.com

  • SuperSpeed USB 3.0-teknik ger snabb åtkomst till externt lagrad data, samtidigt som den är bakåtkompatibel med USB 2.0
  • Designen med kortplatsinmatning och den unika enhetsutmatningsmekanismen ger en snabb och enkel åtkomst till data utan att behöva installera drivrutiner till ett kabinett eller fack.
  • Täcks av StarTech.coms 2-årsgaranti och gratis livstidsgaranti på teknisk support

Partnernummer

  • Ingram Micro Sweden V931026
  • UPC 065030838160

Kompatibilitet

Specifikationer

Warranty Information Warranty 2 Years
Förpackning Package Height 91 mm [3,6 in]
Package Length 17,2 cm [6,8 in]
Fraktvikt (förpackning) 728 g [25,7 oz]
Package Width 16,2 cm [6,4 in]
Hårdvara Gränssnitt USB 3.0
Antal enheter 1
Enhetsstorlek 2.5in & 3.5in
Enhetstyp SATA
Fläkt(ar) Nej
Chipset-ID ASMedia - ASM1053
Indikatorer 1 - LED-indikatorer Ström och aktivitet (fast – ström, blinkande – aktivitet)
Kontakt(er) 1 - Enhetskontakter SATA data- & ström-kombo (7+15-stifts)
1 - Värdkontakter USB Type-B (9-stifts) USB 3.0
Miljö Drifttemperatur 5°C to 80° (41°F to 176°F)
Förvaringstemperatur -40°C to 70°C (-40°F to 158°F)
Luftfuktighet 8~80% RH
Mjukvara OS-kompatibilitet OS independent; No software or drivers required
Prestanda Typ och hastighet USB 2.0 - 480 Mbit/s
USB 3.0 - 5 Gbit/s
UASP-stöd Nej
Typ och hastighet SATA II (3 Gbps)
Maximal enhetskapacitet För närvarande testat med upp till 4 TB 5400 rpm 3,5"-hårddiskar och 1 TB 5400 rpm 2,5"-hårddiskar
Inlänkningshastighet 15,000 Cycles
Ström Power Source AC-adapter medföljer
Inspänning 100 - 240 AC
Utspänning 12V DC
Utström 2.5A
Polaritet på mittpol Positiv
Kontakttyp M
Strömförbrukning 30
Utseende Produktvikt 392 g [13,8 oz]
Färg Svart
Kabinettyp Av plast
Produktlängd 14,5 cm [5,7 in]
Produktbredd 93 mm [3,7 in]
Produkthöjd 6,5 cm [2,6 in]
Vad det är i lådan 1 - Ingår i paketet USB 3.0 HDD-dockningsstation
USB 3.0-kabel
universell strömadapter (NA, EU, UK, ANZ)
Instruktionsbok

Tillbehör

SAT2IDEADP

SATA till 2,5" eller 3,5" IDE-hårddisk-adapter för HDD-dockningsstationer

Använd 2,5 tums eller 3,5 tums IDE-hårddiskar i en SATA HDD-dockningsstation

Ditt pris
€31,99 EUR excl. VAT
€39,99 EUR incl. VAT
HDDSLEV25

2.5in Silicone Laptop Hard Drive Protector Sleeve with Connector Cap

Provide protection against shocks/impacts to a 2.5in hard drive

Ditt pris
€4,99 EUR excl. VAT
€6,24 EUR incl. VAT
HDDSLEV35

3,5" skyddshylsa i silikon med kontaktlock för hårddiskar

Skydda en 3,5" hårddisk mot elstötar/sammanstötningar

Ditt pris
€7,99 EUR excl. VAT
€9,99 EUR incl. VAT
HDDCASE25BK

2,5" antistatiskt skyddsfodral för hårddiskar - Svart (3-pack)

Passar de flesta 2,5 tums hårddiskar och gör hanteringen säker samt skyddar mot statisk elektricitet

Ditt pris
€19,99 EUR excl. VAT
€24,99 EUR incl. VAT
Utgått
HDDCASE25BL

2.5in Anti-Static Hard Drive Protector Case - Blue (3pk)

Provides safe handling and anti-static protection for most 2.5in hard drives

Ditt pris
€7,99 EUR excl. VAT
€9,99 EUR incl. VAT
Utgått
HDDCASE25OR

2.5in Anti-Static Hard Drive Protector Case - Orange (3pk)

Provides safe handling and anti-static protection for most 2.5in hard drives

Ditt pris
€7,99 EUR excl. VAT
€9,99 EUR incl. VAT
Utgått
HDDCASE25WH

2.5in Anti-Static Hard Drive Protector Case - White (3pk)

Provides safe handling and anti-static protection for most 2.5in hard drives

Ditt pris
€7,99 EUR excl. VAT
€9,99 EUR incl. VAT
Utgått
HDDCASE25YW

2.5in Anti-Static Hard Drive Protector Case - Yellow (3pk)

Provides safe handling and anti-static protection for most 2.5in hard drives

Ditt pris
€7,99 EUR excl. VAT
€9,99 EUR incl. VAT
Utgått
HDDCASE25GN

2.5in Anti-Static Hard Drive Protector Case - Green (3pk)

Provides safe handling and anti-static protection for most 2.5in hard drives

Ditt pris
€7,99 EUR excl. VAT
€9,99 EUR incl. VAT
USB3SAB10

10 ft SuperSpeed USB 3.0 Cable A to B - M/M

Connect to your external devices and transfer data at 10x the speed of USB 2.0

Ditt pris
€11,99 EUR excl. VAT
€14,99 EUR incl. VAT
Utgått
PEXUSB3S2

PCI Express SuperSpeed USB 3.0-kortadapter med 2 portar och UASP-stöd

Lägg till två USB 3.0-portar till din stationära dator genom en PCI Express-utbyggnadskortplats

Ditt pris
€34,99 EUR excl. VAT
€43,74 EUR incl. VAT
Utgått
ECUSB3S2

2 Port ExpressCard SuperSpeed USB 3.0 Card Adapter with UASP Support

Add two USB 3.0 ports to your laptop through an ExpressCard slot

Ditt pris
€21,99 EUR excl. VAT
€27,49 EUR incl. VAT
SATDOCKU3S

USB 3.0 till SATA-hårddisk dockningsstation för 2,5/3,5 HDD

Möjliggör snabb växlingsbar åtkomst till din 2,5 tums- eller 3,5 tums-hårddisk via USB 3.0

Ditt pris
€64,99 EUR excl. VAT
€81,24 EUR incl. VAT
SVA12M2NEUA

DC-strömadapter - 12 V, 2 A

Byt ut din borttappade eller trasiga strömadapter

Ditt pris
€25,99 EUR excl. VAT
€32,49 EUR incl. VAT
SVA12M5NA

DC-strömadapter - 12 V, 5 A

Byt ut din borttappade eller trasiga strömadapter

Ditt pris
€65,99 EUR excl. VAT
€82,49 EUR incl. VAT

Drivers/Downloads

Prata med en rådgivare.

Vi är alltid redo att hjälpa dig med alla dina frågor.

Direktchatt (opens in new window)

Manual(er):

Datasheet

Produktsupport

Prata med en rådgivare.

Vi är alltid redo att hjälpa dig med alla dina frågor.

Direktchatt (opens in new window)

Vanliga frågor

Problemsökning

When you troubleshoot issues with a hard drive dock or duplicator, there are some quick tests that you can complete to rule out potential problems. You can test to make sure that the following components are working correctly and are not the source of the issue:

  • IDE, SATA, and eSATA cables
  • Hard drives
  • Hard drive dock or duplicator

To test your setup components, try the following:

  • Use the cables, hard drives, and hard drive dock or duplicator in another setup to see if the problem is with the components or the setup.
  • Use a different cable, hard drive, and hard drive dock or duplicator in your setup to see if the problem persists. Ideally, you should test a component that you know works in another setup.

When you test the hard drive and hard drive dock or duplicator, it is recommended that you do the following:

Note: For a hard drive duplicator you may need to switch the device to PC mode (if available).

  1. To check Disk Management, press the Windows key + R, type diskmgmt.msc, and press Enter. Check to see if your hard drive is listed.
  2. Do one of the following:
  • If the hard drive is listed with unallocated space, the hard drive needs to be reformatted. Right-click unallocated and click New Simple Volume. Follow the on-screen instructions to complete the reformatting.​

Note: Formatting a hard drive erases all of the data on it. Make sure that you back up all of your data before you reformat the hard drive. 

  • If the hard drive is listed as healthy but does not have a drive letter, for example, C:, right-click healthy and click Change Drive Letter and Paths. Click Add, assign a drive letter, and click OK.

Note: A formatted hard drive will not show up in Computer or My Computer until it has a drive letter assigned to it.

This docking station allows the hard drive to enforce its own power state, as opposed to enforcing a power state that keeps the hard drive active at all times. Since most newer hard drives have low-power energy conservation modes, this will cause the hard drive to enter an idle state if it is not used for a certain amount of time. 

 

Hur man

To confirm that Windows detects your USB device, complete the following:

  1. Press the Windows key+R, type devmgmt.msc, and press Enter.
  2. In Device Manager, under the appropriate heading, confirm that your expansion card is listed and that there isn't an exclamation mark next to it.  For example, a USB controller card would be under Universal Serial Bus controllers.

Your USB device is listed according to the name of the chipset. To determine the name of the chipset of your USB device, navigate to www.StarTech.com and look on the Technical Specifications tab for your product.

To confirm that the Mac OS detects your USB device, complete the following:

  1. Click the Apple icon.
  2. Click About This Mac.
  3. Click More Info or System Report.
  4. Under the appropriate heading, confirm that your USB device is listed and that there isn't an error. For example, a network card would be under Ethernet Cards.

You may need to refresh the System Information page after you plug in your device.  To do so, press Command R with the System Information page open.

Your USB device is listed according to the name of the chipset. To determine the name of the chipset of your USB device, navigate to www.StarTech.com and look on the Technical Specifications tab for your product.

Before You Buy

To determine if your hard drive will work in this device, on the product page, click the Technical Specifications tab, and do the following:

  • Make sure that the device supports the storage size of your hard drive. If the storage size of your hard drive is larger than what the device was tested with, the hard drive will likely still work with the enclosure.
  • Confirm that your hard drive uses the same interface type as the device. For example, IDE, SATA, or M.2.
  • Make sure that the device supports the physical size of your hard drive, such as 2.5 inches or 3.5 inches.
  • Verify that the power consumption of your hard drive doesn’t exceed the power output of the device. If you’re using multiple hard drives, make sure that the combined power consumption of all of the hard drives doesn’t exceed the power output of the docking station.

Hard Drives

Windows 10 

Before you can access a new or formatted drive in your operating system, you need to initialize it first and then create a partition on the drive. A partition defines an area of the drive to use for storing data. The partition uses a file system (for example, ex-FAT, NTFS, and so on).

Initialize a drive

Note: You typically only need to initialize a drive if the drive is new. If you cannot find an uninitialized drive in Disk Management, skip the following steps and try to partition your device.

  1. Press the Windows key + R, type compmgmt.msc, and click Run to open Computer Management.

  2. Navigate to Disk Management.

  3. When prompted to, initialize your disk(s). If you are running Windows® 7 or later and are using a drive larger than 2TB, initialize the disk(s) with GPT. If you are running an earlier version of Windows, initialize the disk(s) with MBR. For more information, visit the following FAQ: https://www.startech.com/support/faqs/technical-support?topic=hard-drives#mbr-vs-gpt.

  4. Click OK.

Create a partition in a drive

Note: The following steps create an NTFS partition that uses the entire drive space. To use a different file system, select a different option in step 6.

  1. Right-click Unallocated or RAW volume, and select New Simple Volume.

  2. In the New Partition Wizard, click Next.

  3. Select Primary partition.

  4. Leave the partition size set to default, and click Next.

  5. Assign a drive letter or leave it set to the default, and click Next.

  6. Enter the following settings to format the partition:

  • In the File System field, enter NTFS.
  • Set the Allocation unit size to Default.
  • In the Volume label field, enter <your name/reference>.
  • Select the Perform a quick format check box.
  • Clear the Enable file and folder compression check box.
  1. Click Next > Finish.

The new drive should appear in Windows Explorer.

Mac OS

Before you can access a new or formatted drive in your operating system, you need to initialize it first and then create a partition on the drive. A partition defines an area of the drive to use for storing data. The partition uses a file system (for example, HFS+, ex-FAT, NTFS, and so on).

Initialize a drive

Mac OSX detects a drive that needs to be initialized and automatically prompts you to initialize the drive. If you are prompted to initialize the drive, click Initialize. If you are not prompted to initialize the drive and you cannot find the drive in Finder, you will need to create a partition on the drive.

Create a partition on a drive

Note: The following steps create an HFS+ (Mac OS Extended (Journaled)) partition that uses the entire drive space.

To create a partition on a new drive, complete the following:

  1. Open Finder.

  2. Navigate to Applications and click Utilities.

  3. Open Disk Utility.

  4. Select the new drive and click the Partition tab.

  5. Click Options and verify that it is set to GUID Partition Table.

  6. Enter a name for the partition.

  7. Click Partition.

The drive should now be accessible in Finder.

Compliance and safety

Compliance letters

Safety Measures

  • If product has an exposed circuit board, do not touch the product under power.
  • If Class 1 Laser Product. Laser radiation is present when the system is open.
  • Wiring terminations should not be made with the product and/or electric lines under power.
  • Product installation and/or mounting should be completed by a certified professional as per the local safety and building code guidelines.
  • Cables (including power and charging cables) should be placed and routed to avoid creating electric, tripping or safety hazards.
* Produkters utseende och specifikationer kan komma att ändras utan förvarning.

Du kanske också gillar

Vänta...
Tillbaka till toppen