USB 3.1 (10 Gbps) mSATA-hårddiskkabinett - aluminium

Gör om din mSATA- eller mSATA Mini-hårddisk till en bärbar, högpresterande lagringslösning över USB 3.1 Gen 2

Produkt ID: SMS1BMU313

  • Lägg till snabb extern lagring till din bärbara eller stationära dator med hjälp av en mSATA-hårddisk
  • Maximera prestandan på din mSATA SSD med USB 3.1 Gen 2-anslutning (10 Gbps)
  • Kompatibel med mSATA och mSATA Mini (mSATA-hårddiskar i fullhöjd och halvhöjd)
Ditt pris
€49,99 EUR excl. VAT
€62,49 EUR incl. VAT

Lägg till datalagring med hög hastighet till din bärbara eller stationära dator med detta bärbara mSATA- och mSATA Mini-hårddiskkabinett. Det ger dig högre dataöverföringshastigheter med USB 3.1 (10 Gbps) i ett solitt aluminiumkabinett.

Hållbar och bärbar

Med dess kompakta design och metallhölje ger mSATA-hårddiskkabinettet dig en väldigt bärbar lagringslösning med hög hastighet. Kabinettet är slimmat och elegant för ett idealiskt tillbehör för bärbara och stationära datorer.

Ventilationshålen hjälper till avleda värme för en optimal driftstemperatur

mSATA-kabinettet ger tillförlitligt hårddiskskydd med sitt hållbara och solida aluminiumhölje. Det har dessutom ventilationshål för att skydda din hårddisk från överhettning genom värmeavledning och för att upprätthålla optimal driftstemperatur. 

Superhöga dataöverföringshastigheter

Med sitt stöd för USB 3.1- (även känd som USB 3.1 Gen 2) och SATA III-värdanslutningar (6 Gbps) låter hårddiskkabinettet dig maximera prestandan på dina mSATA solid state-enheter för att få högre dataöverföringshastigheter. mSATA-hårddiskkabinettet stöder dessutom UASP för förbättrad prestanda.

Diagrammet över filöverföringshastigheter med USB visar att USB 3.1 Gen 2 med 5 Gbps är dubbelt så snabbt som USB 3.0 på 5 Gbps

Kompatibel med alla mSATA-hårddiskar

Detta bärbara hårddiskkabinett är kompatibelt med alla standard mSATA-hårddiskar, inklusive formfaktorn mSATA Mini (halvstorlek).

SMS1BMU313 täcks av StarTech.coms 2-årsgaranti och gratis livstidsgaranti på teknisk support.

Användning

  • Mobila yrkesmän som behöver snabb extern datalagring
  • Lägg snabbt till bärbar extern lagring till din bärbara eller stationära dator med hjälp av en mSATA-SSD
  • Flytta data snabbt och enkelt mellan flera arbetsstationer med hjälp av en anslutning i hög hastighet

Partnernummer

  • Ingram Micro Sweden V933655
  • ALSO Sweden 000000000002776158
  • UPC 065030863452

Kompatibilitet

  • OS Independent logo
OS independent; No software or drivers required

Specifikationer

Warranty Information Warranty 2 Years
Förpackning Package Height 3,4 cm [1,3 in]
Package Length 16,2 cm [6,4 in]
Fraktvikt (förpackning) 136,0 g [4,8 oz]
Package Width 12,8 cm [5,0 in]
Hårdvara Gränssnitt USB 3.1 Gen 2
Antal enheter 1
Enhetsstorlek mSATA (Full Size & Half Size)
Enhetstyp mSATA (Mini SATA)
Enhetsinstallation Fixed
Stödda enhetshöjd(er) Full Size (50.8mm)
Half Size (26.8mm)
Fläkt(ar) No
Chipset-ID ASMedia - ASM1351
Indikatorer 1 - LED-indikatorer Ström och aktivitet
Kontakt(er) 1 - Enhetskontakter mSATA (52 pin, Mini SATA) Slot
1 - Värdkontakter USB 3.1 USB Type Micro-B (10 pin, Gen 2, 10 Gbps)
Mjukvara OS-kompatibilitet OS independent; No software or drivers required
Prestanda Typ och hastighet USB 3.1 Gen 2 - 10 Gbit/s
UASP-stöd Yes
4Kn Support Yes
Typ och hastighet SATA III (6 Gbps)
Port Multiplier No
TRIM Support Yes
RAID No
Maximal enhetskapacitet För närvarande testad med mSATA-hårddiskar på upp till 1 TB
Särskilda anmärkningar/krav Obs. Windows 7 and earlier Windows versions do not support TRIM with USB to SATA devices.
Ström Power Source USB-Powered
Utseende Produktvikt 58,0 g [2,0 oz]
Färg Black
Kabinettyp Aluminum
Maximal enhetshöjd 50,8 mm [2,0 in]
Produktlängd 9,8 cm [3,9 in]
Produktbredd 4,0 cm [1,6 in]
Produkthöjd 1,2 cm [0,5 in]
Vad det är i lådan 1 - Ingår i paketet USB 3.1 mSATA SSD-kabinett - aluminium
USB-A till Micro B-kabel - 46 cm
Skruvmejsel
Snabbstartsguide
4 - Ingår i paketet monteringsskruvar
2 - Ingår i paketet set med mSATA-monteringsutrustning (förinstallerad)

Tillbehör

Utgått
PEXUSB312A

USB 3.1 gen 2-kort med 2 portar (10 Gbps) - 2x USB-A - PCIe

Uppgradera din dator till högre hastighet med USB 3.1 genom att lägga till två USB Type-A-portar på 10 Gbps

Ditt pris
€32,99 EUR excl. VAT
€41,24 EUR incl. VAT
USB3AUB15CMS

Slim Micro USB 3.0 kabel – 15 cm

Minimera trassel och placera dina Micro USB 3.0-enheter nära din stationära eller bärbara dator enkelt, med en tunn och flexibel kabel

Ditt pris
€10,99 EUR excl. VAT
€13,74 EUR incl. VAT
USB3AUB50CMB

0,5 m svart SuperSpeed USB 3.0-kabel A till Micro B – M/M

Anslut en extern hårddisk med USB 3.0 Micro USB till datorn

Ditt pris
€11,99 EUR excl. VAT
€14,99 EUR incl. VAT

Drivers/Downloads

Prata med en rådgivare.

Vi är alltid redo att hjälpa dig med alla dina frågor.

Direktchatt (opens in new window)

Inbyggd programvara

Datasheet

Produktsupport

Prata med en rådgivare.

Vi är alltid redo att hjälpa dig med alla dina frågor.

Direktchatt (opens in new window)

Vanliga frågor

Problemsökning

When you troubleshoot issues with a hard drive enclosure, there are some quick tests that you can complete to rule out potential problems. You can test to make sure that the following components are working correctly and are not the source of the issue:

  • Cables
  • Hard drives
  • Hard drive enclosure

To test your setup components, try the following:

  • Use the cables, hard drives, and hard drive enclosure in another setup to see if the problem is with the components or the setup.
  • Use a different cable, hard drive, and hard drive enclosure in your setup to see if the problem persists. Ideally, you should test a component that you know works in another setup.

When you test the hard drive and hard drive enclosure, it is recommended that you do the following:

  • To check Disk Management, press the Windows key + R, type diskmgmt.msc, and press Enter. Check to see if your hard drive is listed.
  • If the hard drive is listed with unallocated space, the hard drive needs to be reformatted. Right-click unallocated and click New Simple Volume. Follow the on-screen instructions to complete the reformatting.​

Note: Formatting a hard drive erases all of the data on it. Make sure that you back up all of your data before you reformat the hard drive.​

  • If the hard drive is listed as healthy but does not have a drive letter, for example, C:, right-click healthy and click Change Drive Letter and Paths. Click Add, assign a drive letter, and click OK.

Note: A formatted hard drive will not show up in Computer or My Computer until it has a drive letter assigned to it.

If your setup components support USB 3.1 but you are experiencing slower transfer speeds than you expected, consider the following:

  • A USB host connection with multiple USB 3.1 ports might not be able to support 10Gbps on each port simultaneously.
  • The type of port on a device does not determine whether the device is capable of USB 3.1 speeds. A USB-C port might not support USB 3.1 speeds, while USB-A and USB-B ports might support USB 3.1 speeds.
  • Any other devices that you include in your setup, such as an older hard drive in a USB 3.1 enclosure, might create a point of congestion and slow down transfer speeds.

To confirm the functionality of your USB host connection, its ports, and any other devices in your setup, refer to the information provided by the manufacturer.

Note: USB 3.1 is also known as USB 3.1 Gen 2 (10Gbps). Devices that support USB 3.1 should have the USB 3.1 symbol on them. If the USB 3.1 symbol does not appear on your USB source or device, refer to the information provided by the manufacturer to confirm whether the USB source or device support USB 3.1.

Du bör inte uppgradera enhetens inbyggda programvara om du inte har några problem med enhetens funktioner. Du behöver bara uppgradera om du har problem med enheten och är säker på att problemet är den inbyggda programvaran.  Du kan bekräfta detta genom att läsa igenom den medföljande dokumentationen eller kontakta vår tekniska avdelning. Felaktig uppgradering av inbyggd programvara kan resultera i minskade prestanda så vi rekommenderar att du kontaktar StarTech.com först.

Before You Buy

Yes, this device supports the TRIM command. If the OS issues a TRIM command, the command will be passed to the connected device.

To determine if your hard drive will work in this enclosure, on the product page, click the Technical Specifications tab, and do the following:

  • Make sure that the enclosure supports the storage size of your hard drive. If the storage size of your hard drive is larger than what the enclosure was tested with, the hard drive will likely still work with the enclosure.
  • Confirm that your hard drive uses the same interface type as the enclosure. For example, IDE, SATA, or M.2.
  • Make sure that the enclosure supports the physical size of your hard drive, such as 2.5 inches or 3.5 inches.
  • Make sure that the enclosure supports the height of your hard drive. For example, 9 mm or 15 mm.
  • Verify that the power consumption of your hard drive doesn’t exceed the power output of the enclosure. If you’re using multiple hard drives, make sure that the combined power consumption of all of the hard drives doesn’t exceed the power output of the enclosure.

USB 3.1 is the most recent version of the USB (Universal Serial Bus) standard for connecting computers and electronic devices. It is capable of data transfer speeds up to 10Gbps, and while it can use the USB-C connector type, it can also use a variety of other connector types. To achieve USB 3.1 transfer speeds, your USB host connection, cables, and device must all support USB 3.1. USB 3.1 is also known as USB 3.1 Gen 2 (10Gbps). 

USB 3.0 is capable of data transfer speeds up to 5Gbps. USB 3.0 is also known as USB 3.1 Gen 1 (5Gbps).

USB 3.1 is backwards compatible with USB 3.0 and USB 2.0, except in the following scenarios:

  • USB-B 3.1 cables are not compatible with USB-B 2.0 ports.
  • Unless you use an adapter, USB-C ports or cables will not work with USB-A or USB-B ports or cables.
  • Devices that require USB 3.1 transfer speeds of 10Gbps might not work with USB 3.0 or USB 2.0, or you might experience lower transfer speeds and impacted performance.
  • Bus-powered USB devices that requires more power than what USB 2.0 can provide are not compatible with USB 2.0.

To transfer data at speeds of 10Gbps, you need to confirm that the following components in your setup support USB 3.1:

  • The USB host connection
  • The USB cable
  • The USB device and any subcomponents (for example, a hard drive docking station and the hard drives in the docking station)

Note: USB 3.1 is also known as USB 3.1 Gen 2 (10Gbps). Devices that support USB 3.1 should have the USB 3.1 symbol on them. If the USB 3.1 symbol does not appear on your USB source or device, refer to the information provided by the manufacturer to confirm whether the USB source or device support USB 3.1.

The included USB cable for this USB 3.1 Gen 2 device has been tested and verified to perform at USB 3.1 Gen 2 speeds of 10Gbps.

Hard Drives

Windows 10 

Before you can access a new or formatted drive in your operating system, you need to initialize it first and then create a partition on the drive. A partition defines an area of the drive to use for storing data. The partition uses a file system (for example, ex-FAT, NTFS, and so on).

Initialize a drive

Note: You typically only need to initialize a drive if the drive is new. If you cannot find an uninitialized drive in Disk Management, skip the following steps and try to partition your device.

  1. Press the Windows key + R, type compmgmt.msc, and click Run to open Computer Management.

  2. Navigate to Disk Management.

  3. When prompted to, initialize your disk(s). If you are running Windows® 7 or later and are using a drive larger than 2TB, initialize the disk(s) with GPT. If you are running an earlier version of Windows, initialize the disk(s) with MBR. For more information, visit the following FAQ: https://www.startech.com/support/faqs/technical-support?topic=hard-drives#mbr-vs-gpt.

  4. Click OK.

Create a partition in a drive

Note: The following steps create an NTFS partition that uses the entire drive space. To use a different file system, select a different option in step 6.

  1. Right-click Unallocated or RAW volume, and select New Simple Volume.

  2. In the New Partition Wizard, click Next.

  3. Select Primary partition.

  4. Leave the partition size set to default, and click Next.

  5. Assign a drive letter or leave it set to the default, and click Next.

  6. Enter the following settings to format the partition:

  • In the File System field, enter NTFS.
  • Set the Allocation unit size to Default.
  • In the Volume label field, enter <your name/reference>.
  • Select the Perform a quick format check box.
  • Clear the Enable file and folder compression check box.
  1. Click Next > Finish.

The new drive should appear in Windows Explorer.

Mac OS

Before you can access a new or formatted drive in your operating system, you need to initialize it first and then create a partition on the drive. A partition defines an area of the drive to use for storing data. The partition uses a file system (for example, HFS+, ex-FAT, NTFS, and so on).

Initialize a drive

Mac OSX detects a drive that needs to be initialized and automatically prompts you to initialize the drive. If you are prompted to initialize the drive, click Initialize. If you are not prompted to initialize the drive and you cannot find the drive in Finder, you will need to create a partition on the drive.

Create a partition on a drive

Note: The following steps create an HFS+ (Mac OS Extended (Journaled)) partition that uses the entire drive space.

To create a partition on a new drive, complete the following:

  1. Open Finder.

  2. Navigate to Applications and click Utilities.

  3. Open Disk Utility.

  4. Select the new drive and click the Partition tab.

  5. Click Options and verify that it is set to GUID Partition Table.

  6. Enter a name for the partition.

  7. Click Partition.

The drive should now be accessible in Finder.

Compliance and safety

Compliance letters

Safety Measures

  • If product has an exposed circuit board, do not touch the product under power.
  • If Class 1 Laser Product. Laser radiation is present when the system is open.
  • Wiring terminations should not be made with the product and/or electric lines under power.
  • Product installation and/or mounting should be completed by a certified professional as per the local safety and building code guidelines.
  • Cables (including power and charging cables) should be placed and routed to avoid creating electric, tripping or safety hazards.
* Produkters utseende och specifikationer kan komma att ändras utan förvarning.
Vänta...
Tillbaka till toppen