USB 3.1 (10Gbps) adapterkabel för 2,5"/3,5" SATA-enheter - USB-C

Anslut en 2,5" eller 3,5" SATA-SSD/HDD till din USB-C-aktiverade dator med den här USB 3.1-kabeladaptern

Produkt ID: USB31C2SAT3

  • Anslut en 2,5"/3,5" SATA-disk till din USB-C-aktiverade bärbara eller stationära dator för snabb åtkomst till dina externa data
  • Snabba dataöverföringshastigheter genom USB 3.1 Gen 2 (10 Gbps)
  • Inbyggd kabel på 1 m för bekväm användning
Ditt pris
€77,99 EUR excl. VAT
€97,49 EUR incl. VAT

Med den här USB-C™-till-SATA-kabeladaptern får du snabb och enkel åtkomst till data på dina 2,5" eller 3,5"-enheter. Med kabeladaptern kan du ansluta din USB-C-aktiverade bärbara eller stationära dator direkt till en SATA-enhet med ultrasnabb USB 3.1 Gen. 2 (upp till 10Gbps). Det perfekta tillbehöret till din Dell™ XPS, MacBook, Chromebook™ eller annan USB Type-C™-aktiverad enhet.

Enkel och mångsidig åtkomst till hårddisk

Med USB-C-till-SATA-kabeladaptern kan du snabbt byta dina hårddiskar. Du kan kopiera eller hämta data från din 2,5" eller 3,5" SATA-enhet utan några andra tillbehör.

Den verktygslösa kabeladaptern är idealisk för IT-tekniker som behöver snabb åtkomst till SATA-hårddiskar. Den är den perfekta lösningen för dataöverföring, enhetskloning, säkerhetskopiering av data och återställning och ger snabb USB 3.1 Gen 2-prestanda. Du kan också använda flera adaptrar samtidigt när du behöver åtkomst till flera enheter.

Utnyttja hastigheten med USB 3.1 Gen 2

USB 3.1 Gen 2 ger bättre bandbredd och hastigheter upp till 10Gbps - två gånger USB 3.0 (kallas även USB 3.1 Gen 1). Det låter dig utnyttja de senaste SSD-enheternas och hårddiskarnas höga prestanda och samtidigt mildra flaskhalsar i din dataöverföring.

Bärbar och enkel att använda

Den kompakta och lätta designen på USB-C till SATA-adaptern ger enkel bärbarhet. Adaptern har en inbyggd kabel på 1 m så att du aldrig behöver oroa dig för att glömma att ta med dig din anslutningskabel.  

Du kan enkelt ansluta till en 2,5" solid state-enhet eller hårddisk med hjälp av USB-ström utan att extern ström behövs. En universell strömadapter medföljer för användning med dina 3,5" hårddiskar eller för alla 2,5" hårddiskar som kanske behöver extra ström.

USB31C2SAT3 täcks av StarTech.coms 2-årsgaranti och gratis livstidsgaranti på teknisk support.

Användning

  • Få åtkomst till alla SATA 2,5" eller 3,5" SSD/HDD-enheter från en USB-C-aktiverad bärbar eller stationär dator för lätt dataöverföring eller diskkloning.
  • Perfekt för tekniker som behöver snabb och enkel åtkomst till 2,5" eller 3,5"-enheter.
  • Säkerhetskopiera viktig data till en extern lagringsenhet
  • Återställ din dator från en backup-hårddisk
  • Arkivera medieinnehåll som till exempel foton och videor till en bar extern hårddisk

Partnernummer

  • Ingram Micro Sweden V934108
  • UPC 065030872805

Kompatibilitet

Specifikationer

Warranty Information Warranty 2 Years
Förpackning Fraktvikt (förpackning) 324 g [11,4 oz]
Package Length 17 cm [6,7 in]
Package Width 14 cm [5,5 in]
Package Height 50 mm [2,0 in]
Hårdvara Gränssnitt USB 3.1 Gen 2
Busstyp USB 3.1 Gen 2
Antal enheter 1
Enhetsstorlek 2.5in & 3.5in
Enhetstyp SATA
Enhetsinstallation Löstagbar
Chipset-ID ASMedia - ASM1351
Indikatorer 1 - LED-indikatorer Ström och aktivitet
Kontakt(er) 1 - Enhetskontakter SATA data- & ström-kombo (7+15-stifts)
1 - Värdkontakter USB Type-C (24-stifts) USB 3.1 (10 Gbps)
Miljö Drifttemperatur 0°C to 60°C (32°F to 140°F)
Förvaringstemperatur -20°C to 80°C (-4°F to 176°F)
Luftfuktighet 0 %~80 % RH
Mjukvara OS-kompatibilitet OS independent; No software or drivers required
Prestanda Maximal dataöverföringshastighet 10 Gbps
Typ och hastighet USB 3.1 Gen 2 - 10 Gbit/s
UASP-stöd Ja
TRIM Support Ja
4Kn Support Ja
S.M.A.R.T. Support Ja
Typ och hastighet SATA III (6 Gbps)
RAID Nej
Maximal enhetskapacitet För närvarande testad med hårddiskar på upp till 10 TB
Hot swap-förmåga Ja
Ström Power Source AC-adapter medföljer
Inspänning 100 - 240 AC
Inström 0.6 A
Utspänning 12V DC
Utström 2.0 A
Polaritet på mittpol Positiv
Kontakttyp M
Strömförbrukning 24
Särskilda anmärkningar/krav Obs. Windows 7 and earlier Windows versions do not support TRIM with USB to SATA devices.
Utseende Färg Svart
Kabinettyp Av plast
Kabellängd 100 cm [39,4 in]
Produktlängd 87 mm [3,4 in]
Produktbredd 25 mm [1,0 in]
Produkthöjd 20 mm [0,8 in]
Produktvikt 60 g [2,1 oz]
Vad det är i lådan 1 - Ingår i paketet Kabeladapter
universell strömadapter (NA/JP, UK, EU, ANZ)
snabbstartsguide

Tillbehör

Utgått
PEXUSB312A

USB 3.1 gen 2-kort med 2 portar (10 Gbps) - 2x USB-A - PCIe

Uppgradera din dator till högre hastighet med USB 3.1 genom att lägga till två USB Type-A-portar på 10 Gbps

Ditt pris
€32,99 EUR excl. VAT
€41,24 EUR incl. VAT
Utgått
PEXUSB311A1C

USB 3.1-kort (10 Gbps) med 2 portar - 1x USB-C, 1x USB-A - PCIe

Uppgradera din dator till 10 Gbps-hastighet med USB 3.1 Gen 2 genom att lägga till både USB Type-C- och USB Type-A-portar

Ditt pris
€42,99 EUR excl. VAT
€53,74 EUR incl. VAT
PEXUSB311EI

USB 3.1-kort (10 Gbps) med 2 portar - USB-A, 1x extern, 1x intern - PCIe

Uppgradera din dator till den snabbare hastigheten från USB 3.1 Gen 2 genom att lägga till en extern och en intern USB Type-A-port på 10 Gbps

Ditt pris
€63,99 EUR excl. VAT
€79,99 EUR incl. VAT
SAT32MSAT257

mSATA-SSD till 2,5" SATA-adapter-konverterare

Konvertera en mSATA-SSD till en 7 mm hög 2,5" SATA-SSD på 6 Gbps med öppen ram

Ditt pris
€33,99 EUR excl. VAT
€42,49 EUR incl. VAT
SAT32M225

M.2 SSD till 2,5" SATA-adapter-konverterare

Konvertera en M.2 SSD till en 7 mm hög 2,5" SATA-SSD 6 Gbps med öppen ram

Ditt pris
€31,99 EUR excl. VAT
€39,99 EUR incl. VAT
HDDCASE25BK

2,5" antistatiskt skyddsfodral för hårddiskar - Svart (3-pack)

Passar de flesta 2,5 tums hårddiskar och gör hanteringen säker samt skyddar mot statisk elektricitet

Ditt pris
€19,99 EUR excl. VAT
€24,99 EUR incl. VAT
HDDSLEV25

2.5in Silicone Laptop Hard Drive Protector Sleeve with Connector Cap

Provide protection against shocks/impacts to a 2.5in hard drive

Ditt pris
€4,99 EUR excl. VAT
€6,24 EUR incl. VAT
SVA12M5NA

DC-strömadapter - 12 V, 5 A

Byt ut din borttappade eller trasiga strömadapter

Ditt pris
€65,99 EUR excl. VAT
€82,49 EUR incl. VAT
SVA12M2NEUA

DC-strömadapter - 12 V, 2 A

Byt ut din borttappade eller trasiga strömadapter

Ditt pris
€25,99 EUR excl. VAT
€32,49 EUR incl. VAT

Drivers/Downloads

Prata med en rådgivare.

Vi är alltid redo att hjälpa dig med alla dina frågor.

Direktchatt (opens in new window)

Datasheet

Produktsupport

Prata med en rådgivare.

Vi är alltid redo att hjälpa dig med alla dina frågor.

Direktchatt (opens in new window)

Vanliga frågor

Problemsökning

If the USB device does not work after your computer has been in extended hibernation, it is likely that Windows has automatically turned off the USB Root hub to save power. 

The steps below outline how to configure the USB root hub to stay on during hibernation, to prevent this from happening.
 

Windows 10 / 8

  1. On your keyboard, press the Windows key + X and select Control Panel.
  2. Click Hardware and Sound, then click Power Options.
  3. Click Change plan settings for the plan you want to change.
  4. Click Change advanced power settings.
  5. Click the plus sign (+) next to “USB settings” and “USB selective suspend setting” to expand the options and change the setting to Disabled.
  6. Click OK to apply the setting.

Note: You may need to disconnect and re-connect your USB device after applying these settings to re-establish the connection.

Windows 7 / Vista

  1. Click the Start button and select Control Panel.
  2. Click Hardware and Sound, then click Power Options.
  3. Click Change plan settings for the plan you want to change.
  4. Click Change advanced power settings.
  5. Click the plus sign (+) next to “USB settings” and “USB selective suspend setting” to expand the options and change the setting to Disabled.
  6. Click OK to apply the setting.

Note: You may need to disconnect and re-connect your USB device after applying these settings to re-establish the connection.

Windows XP

  1. On your desktop, right-click the My Computer icon and select Properties.
  2. Click the Device Manager tab.
  3. Expand Universal Serial Bus controllers by clicking the arrow to the left of it.
  4. Right-click the first USB Root Hub device and select Properties.
  5. Click the Power Management tab.
  6. Clear the box next to Allow the computer to turn off this device to save power.
  7. Click OK to apply the setting.
  8. Repeat steps 4-7 for any remaining devices in the Universal Serial Bus Controllers section with “Root Hub” in the name.

Note: You may need to disconnect and re-connect your USB device after applying these settings to re-establish the connection.

If your setup components support USB 3.1 but you are experiencing slower transfer speeds than you expected, consider the following:

  • A USB host connection with multiple USB 3.1 ports might not be able to support 10Gbps on each port simultaneously.
  • The type of port on a device does not determine whether the device is capable of USB 3.1 speeds. A USB-C port might not support USB 3.1 speeds, while USB-A and USB-B ports might support USB 3.1 speeds.
  • Any other devices that you include in your setup, such as an older hard drive in a USB 3.1 enclosure, might create a point of congestion and slow down transfer speeds.

To confirm the functionality of your USB host connection, its ports, and any other devices in your setup, refer to the information provided by the manufacturer.

Note: USB 3.1 is also known as USB 3.1 Gen 2 (10Gbps). Devices that support USB 3.1 should have the USB 3.1 symbol on them. If the USB 3.1 symbol does not appear on your USB source or device, refer to the information provided by the manufacturer to confirm whether the USB source or device support USB 3.1.

Before You Buy

The hard drive adapter requires power from your system's USB port. Although you can plug in any standard SATA drive, USB ports only supply a limited amount of power and are not able to power all of the SATA drives plugged into the cable.

As a general rule, the hard drive adapter only supports 2.5 in. hard drives (HDD) and solid state drives (SSD). 3.5 in. drives typically require a 12V power connection, which is not provided by the USB port or the hard drive adapter.

The power capabilities of the USB port combined with the power requirements of the attached drive will determine if the hard drive adapter will work in your setup. The power (in mA) supplied by the USB port must be greater than the requirements of the drive.

If you are using a USB 2.0 port, your port will only be able to supply a maximum of 500 mA (0.5 A). If you are using a USB 3.0 port, your port will be able to supply a maximum of 900 mA (0.9 A).

You can usually find the power requirements of your drive in the technical specifications on the label of the drive or on the manufacturer's website.

Yes, this device supports the TRIM command. If the OS issues a TRIM command, the command will be passed to the connected device.

This device does not support the ATA Packet Interface (ATAPI) protocol. ATAPI is required for optical drives, including CD-ROM drives, DVD-ROM drives, and Blu-ray players. Because this device does not support ATAPI, optical drives are also not supported over any IDE, SATA, or eSATA connections.

For a list of products that do support ATAPI, refer to the following FAQ: https://www.startech.com/faq/hard_drive_controllers_atapi_support.

USB 3.1 is the most recent version of the USB (Universal Serial Bus) standard for connecting computers and electronic devices. It is capable of data transfer speeds up to 10Gbps, and while it can use the USB-C connector type, it can also use a variety of other connector types. To achieve USB 3.1 transfer speeds, your USB host connection, cables, and device must all support USB 3.1. USB 3.1 is also known as USB 3.1 Gen 2 (10Gbps). 

USB 3.0 is capable of data transfer speeds up to 5Gbps. USB 3.0 is also known as USB 3.1 Gen 1 (5Gbps).

USB 3.1 is backwards compatible with USB 3.0 and USB 2.0, except in the following scenarios:

  • USB-B 3.1 cables are not compatible with USB-B 2.0 ports.
  • Unless you use an adapter, USB-C ports or cables will not work with USB-A or USB-B ports or cables.
  • Devices that require USB 3.1 transfer speeds of 10Gbps might not work with USB 3.0 or USB 2.0, or you might experience lower transfer speeds and impacted performance.
  • Bus-powered USB devices that requires more power than what USB 2.0 can provide are not compatible with USB 2.0.

To transfer data at speeds of 10Gbps, you need to confirm that the following components in your setup support USB 3.1:

  • The USB host connection
  • The USB cable
  • The USB device and any subcomponents (for example, a hard drive docking station and the hard drives in the docking station)

Note: USB 3.1 is also known as USB 3.1 Gen 2 (10Gbps). Devices that support USB 3.1 should have the USB 3.1 symbol on them. If the USB 3.1 symbol does not appear on your USB source or device, refer to the information provided by the manufacturer to confirm whether the USB source or device support USB 3.1.

The included USB cable for this USB 3.1 Gen 2 device has been tested and verified to perform at USB 3.1 Gen 2 speeds of 10Gbps.

USB-C is a type of USB connector that is capable of supporting the following:

  • Data transfer speeds up to 10Gbps, if you use USB 3.1.
  • Bi-directional power delivery up to 100W, if both the USB host connection and the device support it.
  • Alternate modes, which deliver different types of data at different speeds. For example, DisplayPort Alternate Mode (DP Alt Mode).

If using Thunderbolt 3 over USB-C, the connection is capable of additional features. For example, Thunderbolt 3 is capable of 40Gbps of total bandwidth. For more information, refer to the following FAQ: https://www.startech.com/faq/thunderbolt-3-port-capabilities.

Not all USB-C ports or devices are capable of supporting all of the features listed above, or all of the features at the maximum capabilities. If you require a specific USB-C feature, your USB host connection, cables, and device must all support the feature that you require. For more information about whether your components support specific USB-C features, refer to the information provided by the manufacturers. 

Compliance and safety

Compliance letters

Safety Measures

  • If product has an exposed circuit board, do not touch the product under power.
  • If Class 1 Laser Product. Laser radiation is present when the system is open.
  • Wiring terminations should not be made with the product and/or electric lines under power.
  • Product installation and/or mounting should be completed by a certified professional as per the local safety and building code guidelines.
  • Cables (including power and charging cables) should be placed and routed to avoid creating electric, tripping or safety hazards.
* Produkters utseende och specifikationer kan komma att ändras utan förvarning.
Tillbaka till toppen
Vänta...