DB9 to DB25 Serial Cable Adapter - F/F

Convert a DB9 male port to a DB25 female port

Produkt ID: AT925FF

  • 1x DB9 female connector
  • 1x DB25 female connector
Ditt pris
€2,99 EUR excl. VAT
€3,74 EUR incl. VAT

The AT925FF DB9F to DB25F cable adapter converts a 9-pin serial port into a 25-pin female port. Backed by StarTech.com’s lifetime warranty.

Användning

  • Converts a 9 pin serial port to a 25 pin female port

Fördelarna med StarTech.com

  • Guaranteed reliability

Partnernummer

  • Ingram Micro Sweden V932890
  • UPC 065030200950

Specifikationer

Warranty Information Warranty Lifetime
Förpackning Fraktvikt (förpackning) 47 kg [103,9 lb]
Package Length 125 m [410,0 ft]
Package Width 90 m [295,2 ft]
Package Height 70 mm [2,8 in]
Kontakt(er) 1 - Connector A DB-9 (9-stifts, D-Sub)
1 - Connector B DB-25 (25-stifts, D-Sub)
Utseende Produkthöjd 16 m [52,5 ft]
Produktlängd 60 m [196,8 ft]
Produktvikt 42 kg [92,8 lb]
Produktbredd 57 m [187,0 ft]
Färg Beige
Vad det är i lådan 1 - Ingår i paketet DB9 to DB25 Serial Cable Adapter - F/F

Drivers/Downloads

Prata med en rådgivare.

Vi är alltid redo att hjälpa dig med alla dina frågor.

Direktchatt (opens in new window)

Datasheet

Produktsupport

Prata med en rådgivare.

Vi är alltid redo att hjälpa dig med alla dina frågor.

Direktchatt (opens in new window)

Vanliga frågor

Before You Buy

A straight-through serial cable is the most common type of serial cable, used to connect a Data Terminal Equipment (DTE) device (for example, a computer) to a Data Communications Equipment (DCE) device (for example, a modem). The pinout of the serial connectors on both sides of the cable are exactly the same with a straight-through serial cable.

A null modem serial cable (frequently called a crossover cable) is used to connect two DTE devices together without the use of a DCE device in between. For this to happen, the Transmit (TXD) and Receive (RXD) pins on one of the serial connectors are flipped.

To confirm the type of serial cable that is required for your device or configuration, refer to the information provided by the manufacturer.

Compliance and safety

Compliance letters

  • RoHS
    • Språk: English
  • WEEE
    • Språk: English

Safety Measures

  • If product has an exposed circuit board, do not touch the product under power.
  • If Class 1 Laser Product. Laser radiation is present when the system is open.
  • Wiring terminations should not be made with the product and/or electric lines under power.
  • Product installation and/or mounting should be completed by a certified professional as per the local safety and building code guidelines.
  • Cables (including power and charging cables) should be placed and routed to avoid creating electric, tripping or safety hazards.
* Produkters utseende och specifikationer kan komma att ändras utan förvarning.
Tillbaka till toppen